• Journal of Biosystems Engineering
• /
• 제25권3호
• /
• pp.221-226
• /
• 2000

Hot air heater with light oil burner is the most common heater for greenhouse heating in the winter season in Korea. However, since the thermal efficiency of the heater is about 80∼85%, considerable unused heat amount in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The heat recovery system is made for plant bed or soil heating in the greenhouse. The system consisted of a heat exchanger made of copper pipes, ${\Phi}12.7{\times}0.7t$ located in the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tank. The total heat exchanger area is 1.5$m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to the performance test it could recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690\ell$/hr from the waste heat discharged. The exhaust gas temperature left the heat exchanger dropped to $100^{\circ}C$ from $270^{\circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{\circ}C$ from $21^{\circ}C$ at the water flow rate of $690\ell$/hr. By the feasibility test conducted in the greenhouse, the system did not encounter any difficulty in operations. And, the system could recover 220,235kJ of exhaust gas heat in a day, which is equivalent of 34% of the fuel consumption by the water boiler for plant bed heating of 0.2ha in the greenhouse.

• BMB Reports
• /
• 제29권6호
• /
• pp.535-539
• /
• 1996

The activation of phospholipase D (PLD) catalyzes hydrolysis of phosphatidylcholine (PC) to phosphatidic acid (PA) and choline in plants as well as animals. To determine the presence of PLD in oat cells, we prepared inside-out plasma membrane and cytosolic fractions from oat tissues. PLD activities in both cytosol and plasma membrane were detected by ion chromatography method. The activity of PLD in plasma membrane was dependent upon $Ca^{2+}$ concentration and was heat stable. To investigate whether G-protein couples to PLD, the effects of $GTP{\gamma}S$ and $GDP{\beta}S$ on the PLD activity were measured. PLD activity was dramatically increased 300~400% in the presence of 50 ${\mu}M$ $GTP{\gamma}S$ but not in the presence of 50 ${\mu}M$ $GDP{\beta}S$. These results indicate that G-protein may be involved in regulation of PLD activity. To identify whether PLD is regulated by red light receptor, phytochrome, we irradiated red, far-red, or red/far-red/red light on oat protoplasts. PLD activity has increased 5-fold and 3-fold by treatment with red light and red/far-red/red light, respectively. In contrast, irradiation with far-red light had little or no effect on PLD activity. These results suggest that phytochrome regulates PLD activity through activation of G-protein in oat cells.

• 한국조명전기설비학회지:조명전기설비
• /
• 제8권1호
• /
• pp.29-36
• /
• 1994

전시조명 설계에 있어서는 광방사 에너지의 흡수에 의해 기인하는 광화학 손상이나 온도상승 등의 작용효과를 고려해야 한다. 본 연구에서는 조명에 의한 손상에 매우 민감한 물질은 50[lx](연간적산조도: 120,000lx.h), 어느종도 민감한 물질을 200[lx](연간적산조도: 480,000lx.h)가 보존 및 관람객의 자연스러운 관람분위기를 줄 수 있는 조도기준이고, 광원은 상대손상계수가 작고 방사조도가 낮은 것을 사용하여 조영되도록 하는 기준을 설정하였다. 또한 전시실의 전반조명은 연색성이 높고 색온도가 낮은 광원으로 눈부심등에 의한 시각상의 손상이 없도록 조명하는 것이 좋은 조명이라는 결론을 얻었다.

• ETRI Journal
• /
• 제27권3호
• /
• pp.337-340
• /
• 2005

A spot-size converted Fabry-Perot laser diode (LD) was flip-chip bonded to a silica-terraced planar lightwave circuit(PLC) platform to examine the effect of the silica terrace on the heat dissipation of the LD module. From the measurement of the light-current characteristics, it was discovered that the silica terrace itself is not a strong thermal barrier, but the encapsulation of the integrated LD with an index-matching polymer resin more or less deteriorates the heat dissipation.

• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.37-42
• /
• 2009

The low melting PET yarn has sheath/core structure: sheath portion consists of low melting point PET and core portion is regular PET. Dyeing properties of fabric made from low melting PET yarn were investigated at different dyeing temperatures. It was found that the exhaustion yield on the low melting PET fabric was higher than on regular PET fabric. The total K/S value of the dyed low melting PET fabric increased as heat setting temperature increased above $150^{\circ}C$ because the sheath portion of the low melting yarn melted. Although fastness to light of the low melting PET fabric was similar to regular PET fabric, fastness to washing was inferior to regular PET fabric by 1 grade.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.175-180
• /
• 2008

Thermoelectric materials convert temperature difference to electric power for power generation and vice versa for refrigeration. Recent advances in enhancing the thermoelectric figure-of-merit shed light on efficient power generation from the waste heat available in industries and vehicles. Nanoscale phenomena with both nanoscale constituent-embedded bulk samples and nanoscale materials proving enhanced thermoelectric performance have been widely reviewed. Bulk materials of crystal-orientation and nano-structured particle embedding seem to promise a higher thermoelectric figure-of-merit and an effective power generation application. As a preliminary study, Si-Ge nanocomposite was prepared with spark plasma sintering method and its properties were examined.

• 한국소음진동공학회논문집
• /
• 제20권9호
• /
• pp.828-833
• /
• 2010

Steam leakage is one of the major issues for the structural fracture of pipes of nuclear power plants. Therefore a method to inspect a large area of piping systems quickly and accurately is needed. In this paper, we proposed the method for the detecting steam leakage by using image signal processing. Our basic idea come from heat shimmer which shine with a soft light that looks as if it shakes slightly. To test the performance of this technique, experiments have been performed for simple heat source and steam generator. Results show that the proposed technique is quite powerful in the steam leak detection.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.20-24
• /
• 2006

In this paper we investigated the method of examining the accelerated life test on LED traffic signal module by the temperature. The longevity presumption of the LED type signal light by a general heat cycle test used and executed cycle when it was done to longevity by the heat cycle test number and the acceleration factor of a real system requirements of this heat cycle test. Therefore, it reports on the introduction of the acceleration type from which the LED traffic signal module is done here to clarify the above-mentioned acceleration factor with the object and the acceleration factor is requested the test atmosphere actually in the system requirements.

• 한국조경학회지
• /
• 제32권6호
• /
• pp.82-94
• /
• 2005

This study was undertaken to measure and analyze the thermal environment characteristics of the grey permeable cement concrete pavement(GPCCP), the permeable cement concrete brick pavement(PCCBP) compared with impermeable cement concrete pavement(ICCP) and bare soil(BS) under the summer outdoor environment. Following is a summary of major results. 1) The peak surface temperature was greatest in the GPCCP$(54.2^{\circ}C)$ followed by ICCP$(47.2^{\circ}C)$ rut August 2, 2002, the hottest day$(35.3^{\circ}C\;of\;highest\;temperature)$ during the experiment; peak temperature in the ICCP and BS were $45.5^{\circ}C)$ and $45.3^{\circ}C)$ respectively. 2) Analysis of heat budget of the pavements has revealed that the heat environment was worse in the GPCCP than that in the ICCP and that this was mainly due to a low albedo in the former(0.2) relative to that of the latter(0.4). 3) Analysis of heat budget of the pavements has revealed that the heat environment was worse in the GPCCP than that in the PCCBP, BS and that this was mainly due to a decreased latent heat resulting from a time dependent decreasing impact of rainfall. 4) It is necessary to make cool pavements to further studies on light-colored surface materials for attaining high albdo and construction methods which can enhance the latent heat through the continuous evaporation from pavements surface. 5) Vertical arrangement of pavement layers has not been considered in the present study, which has been focuses on the heat characteristics of the surface layer materials. Accordingly, future studies will have to be empasized on pavement methods including the vertical arrangement of the pavement layers.

• 공업화학
• /
• 제26권1호
• /
• pp.59-66
• /
• 2015

본 연구는 유기계 보온단열재의 장점인 경량성과 연질특성을 갖는 무기계 보온단열재의 제조를 위한 새로운 개념의 무기질 저온 발포 공정에 관한 것이다. 새로운 무기질 발포 공정은 섬유상인 해포석 및 규산알루미늄으로 하여금 발포체의 골격을 형성토록 하고, 저온에서 기체 발생이 가능한 발포제를 사용하여 무기질 섬유상 골격체가 팽창되어 공동을 형성하게 하며, 이 형성된 공동 속에 낮은 열전도도를 갖는 무기질 다포체인 팽창진주암을 채우는 것이다. 총괄적으로 무기질 재료를 고온 용융함이 없이 저온에서 무기질 발포체의 제조가 가능하게 된다. 이를 위해서 섬유상인 해포석의 해섬처리과정, 발포를 위한 섬유상 슬러리의 열처리공정 등 다양한 준비공정이 필요하며, 열처리 전 슬러리의 최적 조성물 조건이 요구된다. 제조된 발포체는 경량, 연질의 보온단열재로서의 겉보기 밀도, 내력 강도, 굽힘강도, 고내열성 등의 물성을 보여주었다.