• 한국화재소방학회논문지
• /
• 제33권5호
• /
• pp.55-60
• /
• 2019

랙크식 창고에서 화재가 발생되는 경우 건물이 전소되거나 붕괴되는 상태까지 발생된다. 이러한 현상이 발생되는 이유는 랙크식 창고가 층고가 높고, 물품을 수직으로 적재하고 있어 화재 시 천장에 설치되어 있는 감지기에 의한 조기감지가 어렵고, 그로 인하여 초기에 소화하지 못하기 때문이다. 본 연구에서는 수치해석 프로그램인 Fire dynamic simulator (FDS)를 이용하여 랙크식 창고 내에서 화재 시 발생되는 열과 연기의 유동을 분석하였다. 이러한 분석을 통하여 랙크식 창고 내에서 조기 화재감지를 위한 화재감지기의 최적 설치조건을 확인하였다. 그 결과 랙크식 창고에서 조기 화재감지를 위하여 열과 연기의 복합적인 감지가 필요하며, 복합형 감지기를 랙크의 3 level 마다 설치해야 하며, 정온식 감지기는 랙크식 창고에 적합하지 않은 것을 알 수 있었다.

• 한국미생물·생명공학회지
• /
• 제27권4호
• /
• pp.278-285
• /
• 1999

In order to use heat shock promoter for the detection of toxic substances, dnaK promoter was amplified from E. coli genomic DNA by using a polymerase chain reaction(PCR) followed by sequencing and sub-cloning into the multi-cloning site of the plasmid, pUCD615. The pUCD615 is a broad-host-range vector containing promoterless lux operon originated from V.fischeri. The recombinant plasmid was transfered to E. coli DH5$\alpha$ through electroporation. The recombinant E. coli showed several patterns of bioluminescent responses to ethanol stress. The bioluminescent E. coli also showed responses to other toxic substances including FeK3(CN)6, CdCl2, p-nitrophenol and HgCl2. The increases of RLU(Relative Light Unit) were observed at 100ppm of FeK3(CN)6, 10ppm and 100ppm and 100ppm of CdCl2, 1ppm of 10ppm of p-nitrophenol and at 1ppm of HgCl2.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.148-150
• /
• 2006

In this paper, the applicability of an UET(ultrasound excited thermography) for a defect detection of the welded receptacle is described. An UET(ultrasound excited thermography) is a defect-selective and fast imaging tool for damage detection. A high power ultrasound-excited vibration energy with pulse durations of 280ms is injected into the outer surface of the welded receptacle made of Al material. An ultrasound vibration energy sent into the welded receptacle propagate inside the sample until they are converted into the heat in the vicinity of the defect. The injection of the ultrasound excited vibration energy results in heat generation so that the defect is turned into a local thermal wave transmitter. Its local heat emission is monitored by the thermal infrared camera. And they are processed by the image recording system. Measurement was performed on aluminum receptacle welded by using Nd:YAG laser. The observed thermal image revealed two area of defects along the welded seam.

• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.296-301
• /
• 2012

This paper describes an analytic method for infrared thermography to detect surface cracks in thin plates. Traditional thermographic method uses the spatial contrast of a thermal field, which is often corrupted by noise in the experiment induced mainly by emissivity variations of target surfaces. This study developed a robust analytic approach to crack detection for thermography using the holomorphic function of a temperature field in thin plate under steady-state thermal conditions. The holomorphic function of a simple temperature field was derived for 2-D heat flow in the plate from Cauchy-Riemann conditions, and applied to define a contour integral that varies depending on the existence and strength of singularity in the domain of integration. It was found that the contour integral at each point of thermal image reduced the noise and temperature variation due to heat conduction, so that it provided a clearer image of the singularity such as cracks.

• 대한기계학회논문집B
• /
• 제29권11호
• /
• pp.1220-1228
• /
• 2005

Fault detection and diagnostic (FDD) systems have the potential to reduce equipment downtime, service costs, and utility costs. In this study, model based algorithm and fuzzy algorithm were used to detect and diagnose various fault at System multi-air conditioner. various fault include the Refrigerant Low charging, Fouling of Indoor Heat Exchanger, Fouling of Outdoor Heat Exchanger A experimental verification was conducted in the 6HP System multi-air conditioner on an 8-floor building. Test results showed diagnosis result about 78 $\~$ 90$\%$ for given faults. This Study lays the foundation fur future work on develope the real-time fault detection and diagnosis system for the System multi-air conditioner.

• 한국화재소방학회논문지
• /
• 제26권1호
• /
• pp.74-79
• /
• 2012

본 논문은 2011년 개정된 "감지기 형식승인 및 검정기술기준"에 적합한 단독경보형 감지기 개발에 관한 연구이다. 변경된 내용의 가장 큰 특징은 전원이다. 10년 이상 사용 가능한 단독경보형 감지기를 개발하기 위해 나노전력기술이 사용된 저전력 마이크로컨트롤러를 사용하였다. 마이크로컨트롤러의 슬립모드를 활용하고, 저전력의 전원감시부, 열감지부 및 연기감지부를 제작하여 저전력 단독경보형 감지기를 개발하였다. 특히, 비화재보를 줄이기 위해 단독경보형 감지기는 열연 복합식으로 개발되었다. 사용자는 딥스위치를 이용하여 열감지모드 또는 열 연기감지모드로 동작형태를 선택할 수 있다. 마이크로컨트롤러가 지원하는 RS-485 통신기능을 활용하여 유선으로 단독경보형 감지기 간에 통신이 가능하도록 하였다. 이로써 화재발생시 보다 넓은 지역까지 경보를 알릴 수 있고 비화재보를 줄인 열연 복합식 단독경보형 감지기를 개발하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.547-548
• /
• 2010

• 한국항공운항학회지
• /
• 제14권2호
• /
• pp.33-38
• /
• 2006

Heat transfer coefficients and static pressure distributions on a gas turbine vane endwall were experimentally investigated in a 5 bladed linear cascade. The Reynolds number based on an axial chord length and the cascade exit velocity was 500,000. Both heat transfer and pressure measurements on the vane endwall were made at the two different turbulence intensity levels of 6.8% and 10.8%. Detailed heat transfer coefficient distributions on the vane endwall region were measured using a hue detection based transient liquid crystals technique. Results show various regions of high and low heat transfer coefficients on the vane endwall surface due to several types of secondary flows and vortices. Heat transfer coefficient and endwall static pressure distributions showed similar trends for both turbulence intensity, however, the averaged heat transfer coefficients for higher turbulence intensity case was higher than the lower turbulence intensity case by 15%.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1413-1416
• /
• 2005

An infrared temperature sensor module developed for the detection of defects in a plate was modified to use in a cylinder. A set of optical fiber leads and a mechanism maintaining sensor-object distance constant were utilized for the modification of the IR sensor module. The detection performance was experimentally investigated, and the measured temperature was also compared with computed temperature distribution. The experimental outcome indicates that the detection of a simulated defect is readily available. The temperature distribution is better for defect detection than that with the previous device. In addition, the measured distribution is comparable to the calculated one using a heat conduction equation. The developed device of defect detection is suitable to be utilized in chemical processes where most of vessels and piping systems are in the shape of a cylinder.

• 한국의학물리학회지:의학물리
• /
• 제7권2호
• /
• pp.79-90
• /
• 1996

본 논문에서는 2 차원 심초음파도의 경계선 유사 영역에 대해 베이즈 추정기를 사용하여 경계선 검출을 위한 자동문턱 결정방법을 제안하고자 한다. 경계선 유사영역은 전처리과 정에서 흐려진 영상을 명확히 하는데 사용할 열비등방성 확산 방법의 전도계수로부터 얻어진다, 이러한 경계선 유사 영역에 대해 최적 문턱치를 선택하기 위해 베이즈 추정기가 사용되었다. 이 문턱치를 사용하여 영상을 이진화함으로서 심초음파도의 경계선을 자동 적으로 검출하게 된다. 마지막으로 본래의 심초음파도에 위에서 얻어진 경계선을 덧씌움으로써 경계선이 강조된 심초음파도를 얻을 수 있게 된다.