• 동력기계공학회지
• /
• 제8권1호
• /
• pp.48-54
• /
• 2004

In this study, waste heat of Jeju City Waste Environment Center is investigated and the utilization method is suggested with economical analysis of additional investment that needed for new facility. Energy balance of the typical facilities is considered in this study such as incineration plant and LFG power plant. The payback period of the investment which is used for the LFG power plant waste heat utilization facility is about 2.4 years and the economic profit of the facility during 10 years operation is up to 926 million won.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.104-107
• /
• 2000

Evaporative heat transfer characteristics of carbon dioxide has been investigated. Experiment has been carried out for seamless stainless steel tube with outer diameter of 9.55 mm and inner diameter of 7.75 mm. Direct heating method is used for supplying heat to the refrigerant was uniformly heated by electric current which was applied to the tube wall. The saturation temperature of refrigerant is calculated from the measured saturation pressure by using an equation of state. Inner wall temperature was calculated from measured outer wall temperature, accounting for heat generation in the tube and heat conduction through the tube wall. Mass Quality of refrigerant was calculated by considering energy balance in the preheater and the test section. Heat fluxes were set at 12, 16, 20, 23, and $27kW/m^2$, mass fluxes were controlled at 212, 318, 424, and $530 kg/m^2s$, and saturation temperature of refrigerant were adjusted at 0, 3.4, 6.7 and $10.5^{\circ}C$. From this study, heat transfer coefficients of carbon dioxide have been provided with respect to quality for several mass fluxes, heat fluxes. Finally, the experimental results in this study are compared with the correaltion by Gungor and Winterton(1987).

• 설비공학논문집
• /
• 제15권5호
• /
• pp.360-371
• /
• 2003

The calculation of each unit cost of productions is very important for evaluating the economical efficiency and deciding the reasonable sale price. In the present, two methods of exergy costing on multiple energy systems are suggested to reduce the complexities of conventional SPECO method and MOPSA method and to improve the calculation efficiency of exergoeconomics. The suggested methods were applied to a gas-turbine cogeneration and the unit costs of the power and the steam energy were calculated as an example. The main points of our methods are the following three. First, one exergetic cost is applied to one cycle or system. Second, the suggested equations are the internal cost balance equation and the production cost balance equation. Third, necessary states in a system are only inlet and exit states of 1ha components producing energy.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.366-372
• /
• 2007

Joining thin aluminum alloy is difficult using most welding techniques. Many of the problems are associated with bum-through by the high heat input. Common welding techniques are TIG (Tungsten Inert Gas), MIG (Metal Inert Gas), and PULSE-MIG welding. The method provides more control of the heat balance in the welding arc by taking advantage of the different arc characteristics obtained with each of the two polarities. In this paper, we proposed a new welding method by control DSP 320C32, and the characteristic and experiment result-voltage, current, welding bead, and penetrations by this method are presented.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 춘계학술발표회논문집(2)
• /
• pp.643-650
• /
• 1995

A numerical method for treating transient diffusion Involving change of phase is presented. In other methods of dealing with this class of problems, the mass flux balance at the moving phase boundary requires explicit treatment of two distinct phases. The technique, originating from the apparent heat capacity method in transient heat conduction with the phase change, avoids the difficulty by transferring the concentration discontinuity at the boundary to smoothed physical property variations near the moving front. This technique accomodates the nonlinearities which preclude use of analytical solutions. It was tested against known analytical solutions for simple cases and turned out to be quite accurate.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3135-3147
• /
• 1993

A numerical method is presented which can solve the steady flow and heat transfer from a rotating and heated circular cylinder in a uniform flow for a range of Reynolds number form 5 to 100. The steady response of the flow and heat transfer is simulated for various spin parameter. The effects on the flow field and heat transfer characteristics known as lift, drag and heat transfer coefficient are analyzed and the streamlines, velocity vectors, vorticity, temperature distributions around it were scrutinized numerically. As spin parameter increases the region of separation vortex becomes smaller than upper one and the lower region will vanish. The lift force, a large part is due to the pressure force, increases as the Reynolds number and it increases linearly as spin parameter increases. The pressure coefficient changes rapidly with spin parameter on the lower surface of the cylinder and the vorticity is sensitive to the spin parameter near separation region. As spin parameter increases the maximum heat coefficient and the thin thermal layer on front region are moved to direction of rotation. However, with balance between the local increase and decrease, the overal heat transfer coefficient is almost unaffected by rotation.

• 한국토양비료학회지
• /
• 제21권1호
• /
• pp.15-19
• /
• 1988

옥수수 군락형성과정(群落形成過程)에서 순폭사를 구성(構成)하는 열(熱)에너지의 배분(配分)을 보우엔비(比)-에너지수지방법(收支方法)으로 조사(調査)하여 다음과 같은 결론(結論)을 얻었다. 1. 옥수수 전생육기간(全生育期間)동안 군락초관부(群落草冠部)에 도달(到達)된 전천일사량(全天日射量)은 $1,559MJm^{-2}$이었으며 증발잠열(蒸發潛熱)로 쓰여진 열량(熱量)은 $960MJm^{-2}$로 전천일사량(全天日射量)의 61.6%가 군락증발산(群落蒸發散)의 열원(熱源)으로 사용(使用)되었다. 2. 계절별(季節別) 일평균(日平均) 증발산량(蒸發散量)은 2.7mm-5.6mm 범위(範圍)이었다. 3. 증발산(蒸發散)으로 소비(消費)된 물량(量)은 394mm, 전체건물생산량(全體乾物生産量)은 $2,214gm^{-2}$로 전체(全體)옥수수 군락증발산량(群落蒸發散量)에 대(對)한 전건물중(全乾物重)의 비율(比率)인 물이용효율(利用效率)은 $5.6gm^{-2}mm^{-1}$이었다.

• 대한원격탐사학회지
• /
• 제34권2_1호
• /
• pp.301-306
• /
• 2018

도시화는 여름철 도시형 홍수, 도시 열섬 등의 문제를 야기시킨다. 이러한 현상을 해결하기 위해서는 도시 열환경 변화의 정확한 파악이 필요하다. 이는 에너지 수지를 통해 설명될 수 있지만, 도심지의 경우 일반적인 에너지 수지와 달리 건물이나 인공토지피복에 의해 저장된 열에너지인 저장열을 고려하여야 한다. 하지만 저장열은 도시 표면의 복잡한 3차원 구조와 피복의 다양성 때문에 그 산출이 어려우며, 도시마다 다른 환경으로 인해 선행연구의 저장열 산출 방법을 타 도심지에 적용시키는 데는 어려움이 존재한다. 특히 대부분의 선행연구는 국외 도시를 중심으로 이루어졌기 때문에 국내 도심지의 다양한 토지피복과 건물 특성에 적합한 저장열 산출 연구가 필요하다. 따라서 본 연구에서는 국내 도심지의 다양한 지표타입이 존재하는 지역의 자료를 이용하여 저장열의 정량적인 산출이 가능한 회귀 식 도출을 목적으로 한다. 이를 위해 순복사와 지표면 온도 자료를 독립변수로, 플럭스 타워 기반 저장열 추정치를 종속변수로 사용하여 비선형 회귀분석을 수행하였으며, 산출된 회귀계수를 각 독립변수에 적용하여 저장열 산출 회귀 식을 도출하였다. 플럭스 타워 기반 저장열 추정치의 시계열 분석 결과 본 연구에서 산출한 저장열이 주간의 high peak와 야간에서의 값의 분포와 경향을 잘 모의하고 있었고, 플럭스 타워 기반 저장열 추정치에 비해 연속적인 저장열 산출이 가능하였다. 또한 산점도 분석 결과 Root Mean Square Error (RMSE) $50.14Wm^{-2}$, bias $-0.94Wm^{-2}$로 유의한 수준의 정확도를 보였다.

• Steel and Composite Structures
• /
• 제30권3호
• /
• pp.281-292
• /
• 2019

In this paper, analysis of critical fluid velocity and heat transfer in the nanocomposite pipes conveying nanofluid is presented. The pipe is reinforced by carbon nanotubes (CNTs) and the fluid is mixed by $AL_2O_3$ nanoparticles. The material properties of the nanocomposite pipe and nanofluid are considered temperature-dependent and the structure is subjected to magnetic field. The forces of fluid viscosity and turbulent pressure are obtained using momentum equations of fluid. Based on energy balance, the convection of inner and outer fluids, conduction of pipe and heat generation are considered. For mathematical modeling of the nanocomposite pipes, the first order shear deformation theory (FSDT) and energy method are used. Utilizing the Lagrange method, the coupled pipe-nanofluid motion equations are derived. Applying a semi-analytical method, the motion equations are solved for obtaining the critical fluid velocity and critical Reynolds and Nusselt numbers. The effects of CNTs volume percent, $AL_2O_3$ nanoparticles volume percent, length to radius ratio of the pipe and shell surface roughness were shown on the critical fluid velocity, critical Reynolds and Nusselt numbers. The results are validated with other published work which shows the accuracy of obtained results of this work. Numerical results indicate that for heat generation of $Q=10MW/m^3$, adding 6% $AL_2O_3$ nanoparticles to the fluid increases 20% the critical fluid velocity and 15% the Nusselt number which can be useful for heat exchangers.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.415-417
• /
• 2005

In order to retrieve the latent and sensible heat fluxes, high-resolution airborne imageries with visible, near infrared, and thermal infrared bands and ground-base meteorology measurements are utilized in this paper. The retrieval scheme is based on the balance of surface energy budget and momentum equations. There are three basic surface parameters including surface albedo $(\alpha)$, normalized difference vegetation index (NOVI) and surface kinetic temperature (TO). Lowtran 7 code is used to correct the atmosphere effect. The imageries were taken on 28 April and 5 May 2003. From the scattering plot of data set, we observed the extreme dry and wet pixels to derive the fitting of dry and wet controlled lines, respectively. Then the sensible heat and latent heat fluxes are derived from through a partitioning factor A. The retrieved latent and sensible heat fluxes are compared with in situ measurements, including eddy correlation and porometer measurements. It is shown that the retrieved fluxes from our scheme match with the measurements better than those derived from the S-SEBI model.