• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.541-548
• /
• 2018

In this work, the $N_2O$ decomposition catalyst and reaction characteristics to control the $N_2O$ removal were described. Experiments were carried out by using Rh as an active metal catalyst on various supports and the $Rh/CeO_2$ catalyst with $CeO_2$ support showed the best activity for the $N_2O$ decomposition when it was prepared under the constant heat treatment condition ($500^{\circ}C$-4 hr). $H_2-TPR$ and XPS analyzes were performed to confirm the effect of the physical and chemical properties of the catalyst on $N_2O$ decomposition. As a result, it was found that the increase of the oxygen transfer capacity of the catalyst due to the increase of both the redox property and $Ce^{3+}$ amount affected the decomposition reaction of $N_2O$. In addition, the future work will include a treatment process capable of decomposition $N_2O$ and NO under the condition that $N_2O$ and NO are simultaneously generated and its characteristics of $N_2O$ decomposition reaction.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.510-518
• /
• 2018

Recently, lots of interests have been concentrated on the scrubber system that abates waste gases produced from semiconductor manufacturing processes. An effective design of the thermal decomposition reactor inside a scrubber system is significantly important since it is directly related to the removal performance of pollutants and overall stabilities. In the present study, a computational fluid dynamics (CFD) analysis was conducted to figure out the thermal and flow characteristics inside the reactor of wet scrubber. In order to verify the numerical method, the temperature at several monitoring points was compared to that of experimental results. Average error rates of 1.27~2.27% between both the results were achieved, and numerical results of the temperature distribution were in good agreement with the experimental data. By using the validated numerical method, the effect of the reactor geometry on the heat transfer rate was also taken into consideration. From the result, it was observed that the flow and temperature uniformity were significantly improved. Overall, our current study could provide useful information to identify the fluid behavior and thermal performance for various scrubber systems.

• Nuclear Engineering and Technology
• /
• v.28 no.2
• /
• pp.137-149
• /
• 1996

The present study is to analyze an integral test, BETHSY test 6.9c, which represent loss of RURS accident under mid-loop operation. Both the pressurizer manway and the steam generator outlet plenum manway are opened as vent paths in order to prevent the system from pressurization by removing the steam generated in the core. The main purposes are to gain insights into the physical phenomena and identify sensitive parameters. Assessment of capability of CATHARE2 prediction can be established the effective recovery procedures using the code in an actual plant. Most of important physical phenomena in the experiment could be predicted by the CATHARE2 code. The peak pressure in the upper plenum is predicted higher than experimental value by 7 kPa since the differential pressure between the pressurizer and the surge line is overestimated. The timing of core uncovery is delayed by 500 seconds mainly due to discrepancy in the core void distribution. It is demonstrated that openings of the pressurizer manwey and the steam generator manway can prevent the core uncovery using only gravity feed injection. Although some disagreements are found in the detailed phenomena, the code prediction is considered reasonable for the overall system behaviors.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.124-132
• /
• 2016

In order to estimate the effect of flow distributors connected to an upper nozzle of CMT(Core Makeup Tank) on the thermal-hydraulic characteristics in the tank, a simplified 2 inch Small Break Loss of Coolant Accident(SBLOCA) was simulated by skipping the decay power and Passive Residual Heat Removal System(PRHRS) actuation. The CMT is a part of safety injection systems in the SMART (System Integrated Modular Advanced Reactor). Each test was performed with reliable boundary conditions. It means that the pressure distribution is provided with repeatable and reproducible behavior during SBLOCA simulations. The maximum flow rates were achieved at around 350 seconds after the initial opening of the isolation valve installed in CMT. After a short period of decreased flow rate, it attained a steady injection flow rate after about 1,250 seconds. This unstable injection period of the CMT coolant is due to the condensation of steam injected into the upper part of CMT. The steady injection flow rate was about 8.4% higher with B-type distributor than that with A-type distributor. The gravity injection during hot condition tests were in good agreement with that during cold condition tests except for the early stages.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1257-1262
• /
• 2002

The objective was to identify the appropriate form of progesterone, which exhibits compact reproductive responses in Awassi ewes during mid to late seasonal anestrous period. Forty-eight Awassi ewes were randomly allocated into four groups to be treated with 60 mg medroxyprogesterone acetate (MAP), 30 mg fluorogestone acetate (FGA), 40 mg FGA, or 600 mg progesterone sponges. After a 12 day period, sponges were removed and ewes were administered i.m. with 600 IU PMSG (d 0, 0 h). Five harnessed Awassi rams were turned-in with the ewes to detect heat. Ewes were checked for breeding marks at 6 h intervals for 5 days. Blood samples were collected from all ewes for analysis of progesterone concentrations. Pretreatment (d -13 and -12) progesterone concentrations were ${\leq}0.2ng/mL$ among all ewes and were indicative of seasonal anestrous period. On d 0, progesterone concentrations were elevated to $1.4{\pm}0.1ng/mL$ in ewes received progesterone sponges only and were higher (p<0.0001) than those (${\leq}0.2ng/mL$) administered MAP or FGA sponges. Progesterone concentrations returned to their basal values of <0.2 ng/mL within 24 h of sponge removal and were similar (p>0.1) among all ewes. Incidence of estrus was similar (p>0.1) among the four groups and occurred in 75% (9/12), 82% (9/11), 67% (8/12) and 58% (7/12) of the ewes receiving MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively. Estrous responses occurred 14.7, 20 and 13.6 h earlier in progesterone-sponge-treated ewes than those of MAP- (p<0.04), 30 mg FGA- (p<0.01) and 40 mg FGA-treated (p=0.06) ewes, respectively. Induced estrus conception rates were 50% (6/12), 55% (6/11), 50% (6/12) and 42% (5/12), out of which 4/6, 4/6, 3/6 and 3/5 lambed 151 days following d 0, and were similar (p>0.1) among ewes of the four treatment groups. Ewes that returned to estrus 16 to 20 days following d 0 were 5/12, 5/11, 6/12 and 4/12 ewes treated with MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively, and all lambed 169 days later. Overall lambing rates were 75% (9/12), 82% (9/11), 75% (9/12) and 58% (7/12) ewes treated with MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively. Results demonstrate that applications of MAP, 30 mg FGA, 40 mg FGA and progesterone sponges Awassi ewes were equally effective in induction of estrus and tended to favor both types of FGA and MAP in overall lambing rates over progesterone sponges during the seasonal anestrous period.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.875-888
• /
• 2013

The researches have recently progressed toward the use of the superelastic shape memory alloys (SMAs) to develop new smart control systems that reduce permanent deformation occurring due to severe earthquake events and that automatically recover original configuration. The superelastic SMA materials are unique metallic alloys that can return to undeformed shape without additional heat treatments only after the removal of applied loads. Once the superelastic SMA materials are thus installed at the place where large deformations are likely to intensively occur, the structural system can make the best use of recentering capabilities. Therefore, this study is intended to propose new buckling-restrained braced frames (BRBFs) with superelastic SMA bracing systems. In order to verify the performance of such bracing systems, 6-story braced frame buildings were designed in accordance with the current design specifications and then nonlinear dynamic analyses were performed at 2D frame model by using seismic hazard ground motions. Based on the analysis results, BRBFs with innovative SMA bracing systems are compared to those with conventional steel bracing systems in terms of peak and residual inter-story drifts. Finally, the analysis results show that new SMA bracing systems are very effective to reduce the residual inter-story drifts.

• The Journal of Art Theory & Practice
• /
• no.13
• /
• pp.7-33
• /
• 2012

The memory of the Korean War is about the time period when people lived toughly during evacuation, due to being exposed to the natural climate such as intense cold or heat without any protection, leaving their comfortable home and living in temporary built shelters which were barely enough to avoid the wind. 'Death is concealed and only the figures of evacuation for survival were expressed, just as how the government ordered. Since the experience of the battlefield is personal and fragmentary, that is broken into pieces, it does not have compatibility. As war is a distorted experience that cannot be placed in a big picture, it is not possible to take a view of the war's big picture. Having this individualized experience as a common collective memory is an issue and it is the will that people tries to pursue. The reason why the evacuees from north to south, and as well as from the south to further south were all able to be adopted as the theme of artworks due to the military action that emptied the occupied territories of the North Korean Army under the forced removal command. In such situations, the natural state of the 'snow' was like a symbol of the 1.4 Recession. The group of people who were thrown into the intense cold displaced the war damage of loosing their base livelihood, and symbolized the obedient citizens who faithfully follow their government's command. The figure of advocating anti-communism is projected as a figure of a refugee during cold winter-time and it contains ones past which he or she obeyed its own country's commands. Evacuation, especially the evacuation during the winter is a visual device that can confirm these kinds of country's command. The consequences were same for the artists as well. Therefore, the situation being communal could be found due to the individual experiences during war are ideological. The image of the refuge shown in the picture played the role of strengthening the consciousness of defecting to South Korea into the meaning of the 'Finding Freedom.' I would like to express that the reason of them leave their home during the harsh winter is in order to avoid the oppression of the Communist Party. The evacuation that people went through was not to 'Finding Freedom', but 'To Survive'. Later, this evacuation has been imprinted as a behavior of choosing free Republic of Korea, which was an ideological issue. Anti-communism was the rule of survival in South Korea society, and people have the tendency to remember what they want to remember. As it is not the people who possesses an incident, but the memory that possesses ones, people cover their memory with disguised plots in order to forget the violence and to live a different prologue. They share the incident of violence as a hurtful memory. The tragedy of the Korean War was the result of Ideology and being in between the powerful nations' rights, but the violence during the war has been depicted as a natural disaster, which was the evacuation in heavy snow.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.219-235
• /
• 1993

To determine the compatibilities of soft liming materials with denture cleansers by measuring the flexibility and elasticity and investigating the surface changes, 4 self-curing acrylic resin soft lining materials and 1 heat-curing silicone soft lining material were evaluated. 3mm thick x 20mm diameter discs of soft lining materials were individually bonded to a hard acrylic resin base as per manufacturers’instructions. Using an Instron universal testing machine, a static stress of $2kg/cm^2$ was applied for 30secs., the strain in compression was measured, giving an indication of the material’s flexibility. Elastic recovery was measured at 10secs. After removal of stress. Surface changes were investigated with Stereomicroscope. Then the specimens were immersed in 4alkaline peroxide denture cleansers and water as control group, tests were carried out at 1 day, 2 days, 7 days, 14 days and 30 days. The results were as follows : 1. Alkaline peroxide denture cleansers caused considerable porosity on the surface of selfcuring acrylic resin soft lining materials, and the most affected by the cleansers were Viscogel, Coe-Soft, Coe-Comfort, Lynal, in that order. 2. There was significant difference in flexibility between each soft lining material except for Coe-Comfort and Visco-gel, and every soft lining material was significant difference in elasticity. Especially Molloplast-B and Lynal were less flexible and more elastic than other soft lining materials(p<0.05). 3. The denture cleansers increased the flexibility and elasticity of the soft lining materials compared with control group(p<0.05), and Denalan, Polident, Kleenite, Efferdent affected the soft lining materials in that order. 4. There was significant difference in flexibility between each denture cleanser except for Denalan and Polident(p<0.05). Though Denalan and Polident, Denalan and Kleenite did not show significant difference in elasticity, other denture cleansers showed significant difference among each other(p<0.05). 5. Clinically Coe-Comfort, Coe-Soft and Visco-gel were incompatible with alkaline peroxide denture cleansers, and Lynal would be used within only 2 weeks. But Molloplast-B was compatible with alkaline peroxide denture cleansers.

• Korean Journal of Microbiology
• /
• v.39 no.4
• /
• pp.283-287
• /
• 2003

This study was performed to identify the microorganisms from air conditioners and to investigate hygiene management on air conditioners. Eight species of bacteria were isolated and identified from twenty samples of coolers in air conditioners; Pantoea sp., Bacillus circulans, Bacillus pumilus, Corynebacterium, Flavimonas oryzihabitans, Ochrobacterum anthropi, Micrococcus sp., and non fermented bacilli (NFB). One thousand and three hundreds twenty-two persons who used air conditioners in their houses were investigated about the state of hygiene management in their air conditioners. One thousand and one hundred thirty eight persons (86%) of the total investigated persons ventilated their air conditioners and 1,128 persons (85%) of them cleaned their air conditioners. However, 864 persons (66%) of them did not clean filters and 1,089 persons (82%) did not clean the heat exchangers, both of which air conditioners could be easily contaminated by microorganisms. From these results, we could conclude that the contaminants, bacteria as mentioned the above, in air conditioners could cause human disease such as respiratory infections if the number of bacteria increase in air conditioners. Thus, the removal of contaminants and the improved hygiene of the air conditioners can prevent human diseases caused by the released bacteria during the use of air conditioners.

• Korean Journal of Microbiology
• /
• v.39 no.4
• /
• pp.242-247
• /
• 2003

Murine encephalomyocarditis virus (EMCV) has been used as a surrogate for hepatitis A virus (HAV) for the validation of virus removal and/or inactivation during the manufacturing process of biopharmaceuticals. Recently international regulation for the validation of HAV safety has been reinforced because of the reported cases of HAV transmission to hemophiliac patients who had received ntihemophilic factors prepared from human plasma. The purpose of the present study was to compare the resistance of HAV and EMCV to various viral inactivation processes and then to standardize the HAV validation method. HAV was more resistant than EMCV to pasteurization (60oC heat treatment for 10 hr), low pH incubation (pH 3.9 at 25oC for 14 days), 0.1 M NaOH treatment, and lyophilization. EMCV was completely inactivated to undetectable levels within 2 hr of pasteurization, however, HAV was completely inactivated to undetectable levels after 5 hr treatment. EMCV was completely inactivated to undetectable levels within 15 min of 0.1 M NaOH treatment, however, residual infectivity of HAV still remained even after 120 min of treatment. The log reduction factors achieved during low pH incubation were 1.63 for HAV and 3.84 for EMCV. Also the log reduction factors achieved during a lyophilization process of antihemophilic factor VIII were 1.21 for HAV and 4.57 for EMCV. These results indicate that HAV rather than EMCV should be used for the virus validation study and the validation results obtained using EMCV should be precisely reviewed.