• Speech Sciences
• /
• v.12 no.2
• /
• pp.81-88
• /
• 2005

Electrodermal activity(EDA) is a bio-electric signal which occurs at the skin surface during the sweating. EDA reflects the activity of the sympathetic axis of the autonomic nervous system. EDA is associated with the eccrine sweat gland at the palmar and plamar surface. This study was aimed to characterize the relationship between EDA and auditory stimulus intensities. Acoustic stimulus used in this study were 500 Hz, 1 kHz, 2 kHz of narrow band noise, which were representative of speech frequencies in audible range. Stimulus intensity between 90 and 30 dB in 10 dB within dynamic range. After deriving the minimum stimulus intensity(threshold of skin potential) which elicited skin potential, and then the latency and amplitude were derived from waveform of skin potential, each latency and amplitude were compared to stimulus intensity. The waveform of skin potential were recorded stably, and the threshold of skin potential appeared nearly the hearing threshold level of the participant. The latency was decreased and the amplitude was increased according to the increase of the stimulus intensity. These results suggest that auditory evoked skin potential can be applicable to auditory assessment and audiological diagnosis tool.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.53-58
• /
• 1990

The use of spreadsheet packages for solving noise control problems has been cited by several authors, eg Saha[1] and Thornton[2]. The effectiveness of using spreadsheet packages compared with the traditional computer programs written in high level languages was demonstrated when applied to relatively simple problems, such as the selection of hearing protectors or the prediction of noise equation which includes logarithmic additions at most represents the physics of the problem. The simplicity of the governing equation together with the requirement to handle a vast amount of data are considered to be the major reasons for noise control engineers to use spreadsheet packages. Although shipboard noise prediction seems to be very complicated, the calculation procedure itself is, in essence, identical especially true for prediction methods based on empirical formulae[3,4], ie the procedure that consists of the three basic elements, ie source, path and receiver. This paper discusses the application of spreadsheet package LOTUS 1-2-3 to shipboard noise prediction problems. A utility program of the package is written using macro functions and is shown to be especially useful for noise control engineers who are unfamiliar with spreadsheet packages. In addition, a new type of empirical formula, to estimate structureborne noise transmission loss, is proposed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.8
• /
• pp.736-740
• /
• 2007

A laboratory study on low frequency noise assessment has been carried out to evaluate the relevance of the weighting curve. Especially, the A-weighting curve which is used in most noise assessments has been evaluated using the acceptability limit in this study. The acceptability limit is one of the indicators in which the subjective responses were well-reflected. For the measurement of the acceptability limit, pure tone stimuli were used in the frequency range between 20 and 200 Hz. The measurement was proceeded in the anechoic chamber to minimize the background noise level. A total of 29 test subjects, who were aged between 19 to 33 years, participated in this study. They had been exposed to various stimuli for about 1 hour by supra-aural earphone. The measurement consisted of two listening sessions: hearing threshold and the acceptability limit session. The results showed that the tendency of the acceptability limit curve was approximately equal to C-weighting curve which had been found to be superior to A-weighting curve in assessment of low frequencies.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.6
• /
• pp.1-10
• /
• 2001

In this study, the horizontal loading tests of 10ton and 200ton capacity of LRB(lead-rubber bearing) were performed for the evaluation of the dynamic properties of the LRB. It is noted from the test results that dynamic properties of the LRB are dependent on the loading frequency, vertical load and shear strain. A Slender bearing subjected to large deformation will tend to develop plastic hinges in the end regions of the lead plug which will cause the failure of the lead plug. It is recommended that the appropriate mechanical properties of LRB considering the level of structural response and input ground motion should be used in the design of base isolated structures.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.202-212
• /
• 2005

This study was aimed at rating the existing work environment noise components and alternatives in point of worker's view. To answer the purpose, AHP(Analytic Hierarchy Process) method is adopted in this research. Based on the AHP method, this research abstracts a mathematically rigorous noise components and alternative's weights and proven process for priority and decision-making. By reconstructing complex hearing conservation programs to a series of pair-wise comparisons, and then synthesizing the results, this study not only helps establishments of noise countermeasure, but also provides a clear rationale for noise alternatives. The result of this study is summarized as follows; 1) Job satisfaction index and noise identification index are 63, 56 respectively. 2) Noise level(15.7%), frequency(14.1%) and directivity(13.6%) are main reasons in worker's ground. 3) There are some difference between the estimation of worker's identification and that of work sites. 4) Low noise machine(14.7%), enclosure(13.2%) and shielding(9.6%) are chosen for noise protection method by workers. 5) Noise environment improvement should be focused on noise source rather than personal protection. 6) By the AHP method, noise source countermeasure have a key role at work environments.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.129-138
• /
• 2003

Rolling bearings are classified one of the most important machine elements. The various function of bearings are greatly influenced by grease, and higher performance of rolling bearing greases is required in improve bearing lubrication. Three urea/ether oil greases with identical composition were synthesized to compare the performance of these greases according to the thickener content of grease. The typical grease physical properties were investigated. And life test of these greases was conducted by FE-9 grease life tester. The characteristics of the greases before and after life test were investigated using FT-IR, microscope, OIT and TAN meter. Large differences in the grease performance depending on the content of the thickener were observed. The grease with higher content of the hickener showed higher performance such as long life time and low TAN value. After preliminary test, twelve greases were synthesized and evaluated the performance of dropping point and OIT, then optimized two greases were selected by SSRED (Six Sigma Robust Engineering Design) using dropping point and OIT data. Characteristics of the optimized two greases were on the same level with estimated value. The optimized grease by means of OIT value showed longer grease life in comparison with optimized grease by dropping point. However two greases showed higher performance than typical urea/ether oil.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.1
• /
• pp.158-165
• /
• 2013

Objectives : The purpose of this study was to obtain the community residents' support and approval on the water fluoridation program in Mokpo, Korea. Methods : Questionnaires of this were 1085 adults, over the age of 20, who resided in the Mokpo city for over the 1year. In order to analyze the factors that were related to the approval on administering water fluoridation program, the data analyzed using a chi-squared test and a multiple logistic regression analysis. Results : Respondents approving the implementation of water fluoridation were 50.5%. The general factors of approval were age, education, Monthly household income. The knowledge factors of approval were experience of hearing of this program, the knowledge of the purpose of this program, the knowledge of the some regions in South Korea had been implement water fluoridation. The results of multiple logistic regression analysis were the awareness of oral health and the knowledge level of water fluoridation were related with this program approval. Conclusions : In order to enhance the rate of approval on administrating the water fluoridation, it is necessary to publicize the purpose, effect, and stability of this program, through a diverse mass media and reinforce the health education program to oral health management.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.1
• /
• pp.166-173
• /
• 2013

Objectives : The purpose of this study was to survey some soldiers oral care products along recognition, and thereby to identify possible correlations among those factors. Methods : Questionnaire survey was carried out targeting 272 soldiers. The collected data was performed frequency & percentage, fisher's exact test, chi-square test and multiple regression analysis. Results : Respondents approving the implementation of water fluoridation were 50.5%. The general factors of approval were age, education, Monthly household income. The knowledge factors of approval were experience of hearing of this program, the knowledge of the purpose of this program, the knowledge of the some regions in South Korea had been implement water fluoridation. The results of multiple logistic regression analysis were the awareness of oral health and the knowledge level of water fluoridation were related with this program approval. Conclusions : The study suggest that oral care products should be include in military dental health care program. In addition to development dental health programs each military unit is dental health care between Korean soldiers.

• Journal of Environmental Health Sciences
• /
• v.45 no.6
• /
• pp.569-576
• /
• 2019

Objectives: The main purpose of this study was to assess firefighters' daily personal noise exposure and explore noise levels related to specific tasks and their contributions to total noise exposure using 24-hour full-shift noise exposure measurements with task-based data. Methods: Noise exposure was assessed for eight firefighters (two rescuers, two drivers, and four suppressors) using time-activity diaries. We collected a total of 24 full-shift personal noise sample sets (three samples per a firefighter). The 24-hour shift-adjusted daily personal noise exposure level (L_ep,d), eight weekly personal noise exposures (L_eq,w), and 40 task-specific L_eq values (L_{eq activity}) were calculated via the ISO/NIOSH method. Results: The firefighter noise-sample datasets showed that most firefighters are exposed to noise levels above EU recommended levels at a low-action value. The highest noise exposure was for rescuers, followed by drivers and suppressors. Noise measurements with time-at-task information revealed that 82.3% of noise exposure occurred when checking equipment and responding to fire or emergency calls. Conclusions: The results indicate that firefighters are at risk of noise-induced hearing loss. Therefore, efforts at noise-control are necessary for their protection. This task-specific noise exposure assessment also shows that protective measures should be focused on certain tasks, such as checking and testing equipment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.3
• /
• pp.133-141
• /
• 2005

The previous research has been mainly focused on individual technology of voice recognition, voice synthesis, translation, and bone transmission technical. Recently, commercial models have been produced using aforementioned technologies. In this research, a new automated translation support system concept has been proposed by combining established technology of bone transmission and wireless system. The proposed system has following three major components. First, the hybrid system consist of headset, bone transmission and other technologies will recognize user's voice. Second, computer recognized voice (using small server attached to the user) of the user will be converted into digital signal. Then it will be translated into other user's language by translation algorithm. Third, the translated language will be wirelessly transmitted to the other party. The transmitted signal will be converted into voice in the other party's computer using the hybrid system. This hybrid system will transmit the clear message regardless of the noise level in the environment or user's hearing ability. By using the network technology, communication between users can also be clearly transmitted despite the distance.