• Management & Information Systems Review
• /
• v.31 no.4
• /
• pp.397-432
• /
• 2012

The purpose of this study is Big Five personality factors of personality type on career behavior, that is, entry to the unsafe first job in Korean university students. To accomplish this research objective, this study collected data from 500 students in three universities and two colleges located in the Chungcheong region. Among 350 questionnaires, 342 copies were used for a final analysis. In order to analyze the survey data, statistical package program SPSS/WIN 18.0 was utilized and statistical techniques such as basic statistical analysis, factor analysis, Cronbach's alpha, correlation analysis, and multiple regression analysis were used. The results obtained in this study can be summarized as follows. The extraversion personality and agreeableness personality of college students has a significant effect on the entry to the unsafe first job in the positive direction. On the other hand, the neurotic personality and openness to experience has a significant effect on the entry to the unsafe first job in the negative direction. However, the integrity personality of college students was not statistically significant. Finally, based on the empirical results we suggested several theoretical and practical implications.

• Food Science and Preservation
• /
• v.17 no.6
• /
• pp.770-776
• /
• 2010

Sarcodon aspratus (Berk.) S. Ito is a wild mushroom commonly consumed in Korea due to its beneficial effects on health. However, only limited information on the volatile and nonvolatile constituents of S. aspratus is available. In the present study, the total concentration of mushroom soluble sugars, including glucose, trehalose, sucrose, and xylose, was found to be 202.5 mg/kg. The total contents of free and essential amino acids were 2,592.1 mg/kg and 1,249.5 mg/kg, respectively; arginine, lysine, methionine, and valine were the major amino acids present. The contents of total 5'-nucleotides and flavor 5'-nucleotides in S. aspratus were 2,510.7 mg/kg and 773.4 mg/kg, respectively. The volatile components of S. aspratus were collected by simultaneous distillation-extraction (SDE) and analyzed by gas chromatography-massspectrometry (GC-MS). A total of 27 volatile compounds were isolated and identified. The most abundant was l-octen-3-ol, which accounted for more than 68% of total volatiles; other important compounds were 2-octen-1-ol, 1-octen-3-one, and 2-octenol. Our results provide preliminary data for the development of S. aspratus as a food material.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.838-843
• /
• 2005

Bacterial suspension test was used to establish Standardization Test Method to investigate bactericidal activity of disinfectant/sanitizer product. Using acceptable verification methodology, test substance showing 5 log or higher reduction in viable count against Escherichia coli ATCC 10536 and Staphylococcus aureus ATCC 6538, representing Gram-negative and -positive bacteria, respectively, under test conditions for $5\;min{\pm}10\;sec\;at\;20{\pm}1^{\circ}C$ was considered to have sanitizing capability. All disinfectant/sanitizer products tested under manufacturer's recommended in-use condition gave good reduction values against major food-poisoning bacteria. This standardized method was valuable for evaluating efficacy of disinfectants/sanitizers and could be used as Standardization Test Method for assessing bactericidal activity

• Journal of Life Science
• /
• v.17 no.11
• /
• pp.1505-1510
• /
• 2007

We found 8 single nucleotide polymorphisms (SNPs) in adipocyte fatty acid bonding protein (FABP4) gene as candidate gene of FAT1 locus on pig chromosome 4. With over 800 heads of major commercial pig breeds including Duroc, Landrace, Berkshire and Yorkshire, we analyzed SNPs of FABP4 gene to determine possible effects of FABP4 genotype to economically important traits. $400{\sim}800\;bp$ amplicons in FABP4 gene were used PCR-RFLP for each SNPs and we found that the frequency of some SNPs of this gene was different among the breeds. According to the statistical analyses to determine possible associations of each genotype with economic traits, it was found that subgroup with different genotypes showed significant differences in daily gain, backfat thickness, lean percentage and feed conversion ratio (P<0.05). Thus, as a Part of enhancing the selection competence related to swine growth rate and lean percentage, it is expected that FABP4 gene markers verified in this study will be useful to use for Korean commercial pig industry.

• Journal of Life Science
• /
• v.22 no.12
• /
• pp.1697-1703
• /
• 2012

Obesity is a risk factor for numerous metabolic diseases. Recently, naturally occurring compounds that may improve obesity have received increasing attention. Xanthigen is a mixture of fucoxanthin and punicic acid derived from brown seaweed and pomegranate seed, respectively, which have been traditionally used for lipid-lowering effects in humans. In this study, we investigated whether Xanthigen attenuates high-fat diet-induced obesity in C57BL/6N mice. The mice were fed on a normal diet (ND), high-fat diet (HFD), HFD plus 1% Xanthigen or HFD plus 1% green tea extract (GTE) for 11 weeks. Food efficiency ratio (FER) and body weight were significantly reduced in mice fed HFD plus Xanthigen compared to HFD-fed mice. Consistent with the results in body weight change, Xanthigen also significantly decreased the weights of epididymal adipose tissue, retroperitoneal adipose tissue, and liver in HFD plus 1% Xanthigen-fed mice. The serum level of low-density lipoprotein (LDL)-cholesterol was significantly decreased in HFD plus Xanthigen-fed mice compared to HFD-fed mice. These results suggest that Xanthigen may be useful in the development of a functional health food for anti-obesity.

• Korean Journal of Veterinary Research
• /
• v.60 no.2
• /
• pp.61-68
• /
• 2020

The zoonotic transmission of viral diseases to humans is a serious public health concern. Pigs are frequently a major reservoir for several zoonotic viral diseases. Therefore, periodic surveillance is needed to determine the infection rates of zoonotic diseases in domestic pigs. Hepatitis E virus (HEV), rotavirus, sapovirus (SaV), and norovirus (NoV) are potential zoonotic viruses. In this study, 296 fecal samples were collected from weaned piglets and growing pigs in 13 swine farms, and the viral RNA was extracted. Partial viral genomes were amplified by reverse transcription-polymerase chain reaction (PCR) or nested-PCR using virus-specific primer sets under different PCR conditions. HEV-3, rotavirus A, and SaV genogoup 3 were detected from 11.5, 2.7, and 3.0% of the samples, respectively. On the other hand, NoV was not detected in any of the samples. Genetic analysis indicated that the nucleotide sequences of swine HEV-3 and rotavirus A detected in this study were closely related to those of human isolates. However, swine SaV was distant from the human strains. These results suggest that HEV-3 and rotavirus A can be transmitted from pigs to humans. Therefore, strict preventive measures should be implemented by workers in the swine industry to prevent infections with HEV-3 and rotavirus A excreted from pigs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2006

Through the application of a microwave-assisted extraction, the aim of study was to investigate the extraction conditions for the total yield, electron donating ability, total polyphenol contents and nitrite scavenging effect from Pleurotus eryngii. This experiment was conducted under the following extraction conditions: the microwave power (60, 90, 120 W), sample to solvent ratio (1:50, 1:20, 1:10), extraction time (1, 5, 10, 15 mins), and extractant like water, $50\%$ EtOH and $99\%$ EtOH. During the increase of microwave power ranging from 60 to 120 W, the maximized effective components were obtained when the microwave power was set at 60 W. By decreasing the ratio down to 1:10 (g/mL), the extraction of effective components but not total yield was the highest at 1:10 (g/mL). As going up to 15 min, the maximum extraction of effective components was achieved at 1 min for the extraction time and was little affected at over 5 min. In conclusion, the most appropriate conditions for the extraction of effective compounds from Pleurotus eryngii were as follows: the microwave power at 60 W, 1:10 of the sample to solvent ratio, extraction time at 1 min and water as the extractant.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.67-72
• /
• 2012

In recent days, the wire width of IC is narrowed and the degree of integration of IC is increased to obtain the higher capacity of the devices in electronic industry. And then the surface quality of FCCL(Flexible Copper Clad Laminate) became increasingly important. Surface defects on FCCL are bump, scratch, dent and so on. In particular, bumps cause low reliability of the products. Even though there are bumps on the surface, if leveling characteristic of plating solution is good, it does not develop significant bump. In this study, the leveling characteristics of additives are investigated. The objective of study is to improve the leveling characteristic and reduce the surface step through additives and plating conditions. The additives in the electrodeposition bath are critical to obtain flat surface and free of defects. In order to form flat copper surface, accelerator, suppressor and leveler are added to the stock solution. The reason for the addition of leveler is planarization surface and inhibition of the formation of micro-bump. Levelers (SO(Safranin O), MV(Methylene Violet), AB(Alcian Blue), JGB(Janus Green B), DB(Diazine Black) and PVP(Polyvinyl Pyrrolidone) are used in copper plating solution to enhance the morphology of electroplated copper. In this study, the nucleation and growth behavior of copper with variation of additives are studied. The leveling characteristics are analyzed on artificially fabricated Ni bumps.

• 월간산업보건
• /
• s.5
• /
• pp.4-15
• /
• 1988

In order to proffer the fundamental data for the better working environment and the effective establishment of hearing conservation program on workers exposed to industrial noise, author assessed noise levels on the 42 noisy processes among 84 manufactures of 9 industries and measured noise gearing loss by the type of industries on 3,104 workers at these noisy processes from March, 1986 to Februry, 1987. The results were summarized as follows: 1. The averge of A-weight sound level of 23 processes(54.8%) and the avergae of sound level at each octave band of 14 processes(33.3%) exceeded the permissible exposure limits in 8 hours per day. 2. The noise level was the highest in process of cocking of ship building(109.1dBA), and followed by plating of steel rolling(104.3dBA), rivet of manufacture of motor vehicles(102.5dBA), shot of ship building(98.5dBA), aciding(95.7BA) and steel tubing(95.0dBA) of steel rolling, weaving of textiles(95.0dBA). 3. The permissible exposure time for the average of sound level at each octave band was only 30 minutes in the process of cocking of ship building, plating of steel rolling and rivet of manufacture of motor vehicles. 4. As a result of audiometric examination in 3,104 workers, the rate of hearing loss over 50dB at 4,000Hz was 7.3%(227 workers) and the rate of hearing loss over 41dB at 60average method was 2.9%(89 workers). 5. The prevalence of occupational hearing loss in ship building and manufacture of motor vehicle was 5.2% and it was the highest among prevalence of these 9 industries. 6. As a result of this suvery, the noise control and gearing conservation program were required especially in the industry of ship building and manufacture of motor vehicle.

• Journal of Sensor Science and Technology
• /
• v.14 no.2
• /
• pp.69-77
• /
• 2005

The electronic nose (e-nose) has been used in food industry and quality controls in plastic packaging. Recently it finds its applications in medical diagnosis, specifically on detection of diabetes, pulmonary or gastrointestinal problem, or infections by examining odors in the breath or tissues with its odor characterizing ability. Moreover, the use of portable e-nose enables the on-site measurements and analysis of vapors without extra gas-sampling units. This is expected to widen the application of the e-nose in various fields including point-of-care-test or e-health. In this study, a PDA-based portable e-nose was developed using micro-machined gas sensor array and miniaturized electronic interfaces. The rich capacities of the PDA in its computing power and various interfaces are expected to provide the rapid and application specific development of the diagnostic devices, and easy connection to other facilities through information technology (IT) infra. For performance verification of the developed portable e-nose system, Six different vapors were measured using the system. Seven different carbon-black polymer composites were used for the sensor array. The results showed the reproducibility of the measured data and the distinguishable patterns between the vapor species. Additionally, the application of two typical pattern recognition algorithms verified the possibility of the automatic vapor recognition from the portable measurements. These validated the portable e-nose based on PDA developed in this study.