• 한국지진공학회논문집
• /
• 제19권6호
• /
• pp.283-292
• /
• 2015

In the moment frame subjected to earthquake loads, beam-column joint is structurally important for ductile behavior of a system. ACI Committee 352 proposed guidelines for designing beam-column joint details. The guidelines, however, need to be updated because of the lack of data regarding several factors that may improve the performance of joints. The purpose of this study is to investigate the seismic performance of reinforced concrete exterior joints with high-strength materials and unbonded tendons. Three specimens with different joint shear demand-to-strength ratios were constructed and tested, where headed bars were used to anchor the beam bars into the joint. All specimens showed satisfactory seismic behavior including moment strength of 1.3 times the nominal moment, ductile performance (ductility factor = at least 2.4), and sufficiently large dissipated energy.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권6호
• /
• pp.147-161
• /
• 2017

일반적으로, 원전구조물은 다량의 철근이 사용되어 시공과정에서 여러 잠재적 문제점이 발생한다. 특히, 구조부재의 연결부위는 수많은 갈고리철근, 매입철물과 주변 철근 등에 의해 심각한 과밀현상이 발생하므로 여타 다른 부위보다 콘크리트 타설에 더 큰 어려움이 야기된다. 원전구조물에 사용되는 일반강도(ASTM A615 Gr.60)의 대구경(43 mm & 57 mm) 표준갈고리 철근을 대신하여 고강도(ASTM A615 Gr.80)의 대구경(43 mm & 57 mm) 확대머리 철근을 사용할 수 있도록 관련 기술기준을 개정하여 철근 과밀배근 문제를 해결하는 데 본 연구의 목적이 있다. 확대머리 철근을 원전구조물에 효과적으로 사용하기 위해서는 기존의 정착성능을 그대로 유지하거나 그 이상으로 증가시키면서 사용 제한요건을 완화는 방안을 찾아야 하므로 철근직경, 철근 항복강도, 측면피복 두께와 같이 확대머리 철근의 사용을 제한하는 변수 영향을 검토할 수 있는 실험결과를 분석하여 정착성능을 평가하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.512-517
• /
• 2003

The repeated loading responses of four shear-critical reinforced concrete beams, with two different shear span-to-depth ratios, were studied. One series of beams was reinforced using pairs of bundled stirrups with $90^{\circ}C$ standard hooks, having free end extensions of $6d_b$. The companion beams contained shear reinforcement made with larger diameter headed bars anchored with 50mm diameter circular heads. A single headed bar had the same area as a pair of bundled stirrups and hence the two series were comparable. The test results indicate that beams containing headed bar stirrups have a superior performance to companion beams containing bundled standard stirrups, with improved ductility, larger energy adsorption and enhanced post-peak load carrying capability. Due to splitting of the concrete cover and local crushing, the hooks of the standard stirrups opened, resulting in loss of anchorage. In contrast, the headed bar stirrups did not lose their anchorage and hence were able to develop strain hardening and also served to delay buckling of the flexural compression steel. Excellent load-deflection predictions were obtained by reducing the tension stiffening to account for repeated load effects.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.247-255
• /
• 2022

본 논문에서는 겹침이음되는 고강도 확대머리철근의 유효춤이 동일한 경우와 상이한 경우의 겹침이음상세를 가지는 보에 대하여 휨실험을 실시하였다. 이를 통하여 고강도 확대머리철근의 겹침이음성능을 평가하였고, KDS-2021 설계식의 적용성을 평가하였다. 실험 변수는 철근의 설계기준항복강도, 겹침이음길이, 스터럽 간격, 서로 겹침되는 철근간의 중심간격 등이다. LS 계열 실험체에 대한 ACI 318-19식이 KDS-2021식과 비교하여 약 23.8~32.7% 더 큰 정착길이를 나타내었으며, VLS 계열 실험체에서는 약 13.7~35.5% 더 큰 정착길이로 평가하고 있다. 유효춤이 동일한 확대머리 철근의 겹침이음실험에서 KDS-2021식의 1.3배 이상, ACI318-19식의 1배 이상의 겹침이음길이를 가지는 실험체는 모두 연성적인 거동 후 휨파괴되어 충분한 겹침이음성능을 확보하였다. 유효춤이 상이한 철근간에 겹침이음되는 상세를 가지는 실험체는 KDS-2021식으로 겹침이음길이를 산정할 경우, 유효춤이 적은 측의 철근강도를 증가시킴으로써 유효춤이 큰 단면의 보유휨강도와 유사하도록 휨응력을 전달시킬 수 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권6호
• /
• pp.68-75
• /
• 2021

본 연구에서는 반복하중을 받는 외부 보-기둥 접합부에 정착된 57mm 확대머리철근의 정착성능을 평가하였다. 총 4개의 외부 보-기둥 접합부 실험체를 계획하였으며, 콘크리트 압축강도, 측면피복두께, 횡보강근비 및 파괴유형을 주요 실험 변수로 설정하여 정착성능평가를 수행하였다. 성능평가 결과, 접합부에 정착된 대구경 확대머리철근의 정착성능에 가장 큰 영향을 주는 요소는 측면피복두께 및 횡보강근으로 나타났으며, 외부 보-기둥 접합부에 정착된 57mm 대구경 확대머리철근은 반복하중하에서도 충분한 정착성능이 발현되는 것을 확인할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.454-457
• /
• 2006

This study presents a strut-and-tie model for the development of headed bars in an exterior beam-column joint with transverse reinforcements. The tensile force of a headed bar is considered to be developed by head bearing together with bond along a bonded length as a partial embedment length. The model requires construction of struts with biaxially compressed nodal zones for head bearing and fan-shaped stress fields against neighboring nodal zones for bond stresses along the bonded length. Due to the existence of transverse reinforcements, the fan-shaped stress fields are divided into direct and indirect fan-shaped stress fields. A required development length and head size of a headed bar can be optimally designed by adjusting a proportion between a bond contribution and bearing contribution.

• Architectural research
• /
• 제19권4호
• /
• pp.109-115
• /
• 2017

This study is done to evaluate how existence of shear-span ratio and shear reinforcing bar effects on shear performance from through shear experiment using PVA fiber reinforced ferroconcrete building. Ratio of shear-span was set 1, 1.7, and arrangement of shear reinforcing bar was set with KCI2012 regulation. In result, subject with less shear-span ratio, and shear reinforcing bar with arrangement of bar shows high stiffness. Subjects with high shear-span ratio show large difference depending on existence of shear reinforcing bar. Therefore, theoretical shear strength followed by CEB code underestimates experimental shear strength by 43.9%. Shear strength of the deep beam with headed bars is more affected by the bearing strength of head than the bond strength of bar.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.110-116
• /
• 1999

A new KAVF(kinematically-admissible velocity field) is proposed to determine the forming load, the average extruded length and the flow pattern is the extrusion/forging process of polygonal headed bars. Experiments are carried out with lead billets at room temperature using regular polygonal shaped punches. The theoretical predictions of the forming load and the average extruded length are in good agreement with the experimental results.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.96-103
• /
• 1999

A kinematically admissible velocity field is derived to analyze the forming load and the extruded length in the extrusion/forging process of trochoidally headed bars from round billets. The forming load and the extruded length are obtained by minimizing the total energy-consumption rate. Experiments are carried out with lead billets at room temperature using trochoidally shaped punches. The theoretical predictions of forming load and extruded length are in good agreement with the experimental results.

• Steel and Composite Structures
• /
• 제37권6호
• /
• pp.649-662
• /
• 2020

Although several types of rigid shear connectors have been developed particularly to increase load-carrying capacity, application is limited due to the complicated details of such connection. In this study, push-out tests were performed for specimens with hybrid shear connectors using headed studs and shear plates to identify the effects of each parameter on the structural performance of such shear connection. The test parameters included steel ratios of headed stud to shear plate, connection length, and embedded depth of shear plates. The peak strength and residual strength were estimated using various shear transfer mechanisms such as stud shear, concrete bearing, and shear friction. The hybrid shear connectors using shear plates and headed studs showed large load-carrying capacity and deformation capacity. The peak strength was predicted by the concrete bearing strength of the shear plates. The residual strength was sufficiently predicted by the stud shear strength of headed studs or by shear friction strength of dowel reinforcing bars. Further, the finite element analysis was performed to verify the shear transfer mechanism of the connection with hybrid shear connector.