• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.72-85
• /
• 1983

Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.128-137
• /
• 2016

This study aimed to investigate the effect of kangaroo care on physical development adaptation of external environment of prematurity, and maternal role confidence of those who delivered preterm infants. The subjects were 38 preterm infants and mothers with cesarean section delivery in the hospital, located at B city. Eighteen premature infants were assigned to the kangaroo care (KC) group or the control group (CG). Data were collected between June 2013 and June 2015. KC was given 3 times a day (60 min at a time) and performed a total of 10 times. The physical development indicator (weight, height, and head circumference) as well as the adaptation of external environment (temperature, heart rate, oxygenation) of preterm infants were checked before the start of the program. Following the initial measurement, the program was performed, and measurements were taken again at the end of the program. For measurement of maternal role confidence, structured self-reported questionnaires were performed. The results showed that the KC group had a lower oxygenation compared with the CG (t=2.27, p=.02); however, the physical development indicator (weight t=-0.83, p=.21, height t=-0.34, p=.37, head circumference t=1.29, p=.10) and maternal role confidence (t=-0.41, p=.34) were not significantly compared with the CG. The results of this study suggest that the practice of KC helps the adaptation of external environment of preterm infants

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.227-227
• /
• 2017

This study was conducted to analyze the reduction of quality and ripening rate of rice due to submergence during ripening stage and identify the physiological cause. Korean japonica type rice cultivars, Nampyeong was used in the experiment. The following 7, 14 day after heading, they were then moved into submergence treatment facility and we conducted the tests under three different submergence conditions - T1(clear water and overhead submergence), T2(Muddy water and exposure of Flag leaf end ), T3(Muddy water and overhead submergence), and the treatment lasted for 4days. The decrease of ripening rate was most severe in T3 treatment at 7days after heading, and the decrease of head rice ratio was most severe in T3 treatment at 14days after heading. Meanwhile the starch synthesis was inhibited, as the supply of assimilation products was inhibited in grain during the submergence treatment. And in stem, sucrose content was increased because the soluble carbohydrates accumulated before heading were decomposed. These changes may be due to the consumption of respiratory substrate in anaerobic conditions and the inhibition of the production of photosynthetic products by light interception. In order to see what kind of reaction occurs at the molecular level, we examined the degree of RNA expression in grain, stem and leaf. First, the expression of rna associated with starch synthesis in grain was decreased in all submergence treatment. and especially Ospul(DBE) was more decreased in 14days after heading treatment than 7days after heading treatment. This difference can explain the result that the decrease of head rice ratio was more severe at 14days after heading. And in stem, the expression of rna associated with the supply of assimilation products was decreased in submergence treatment. Finally in leaf, the expression of rna(ADH, ALDH) associated with anaerobic respiration was increased, while the expression of rna associated with photosynthesis was decreased. These results of physiological analysis can used to develop the cultivation technique and to offer the information for breeding the cultivars with tolerant characteristics to submergence stress during ripening stage in rice.

• Journal of Veterinary Clinics
• /
• v.32 no.2
• /
• pp.148-153
• /
• 2015

This study was performed to compare two opioid drugs with isoflurane and to determine the difference between isoflurane/remifentanil anesthesia and isoflurane/fentanyl anesthesia in terms of the anesthetic effects in beagle dogs. Isoflurane was maintained at 0.5 MAC, and the opioid drug was administered as a constant rate infusion. The anesthesia was maintained for 2 hours, and isoflurane and opioid drugs were discontinued 2 hours later. After discontinuing the anesthetics, the extremity movement time, eye global positioning time, gag reflex time, head up time, sternal recumbency time, standing time, walking time and complete recovery times were recorded for each dog. Both of the studied anesthetic protocols were suitable in beagle dogs because the anesthetic status was well maintained until the end of the procedure, and rapid recovery times were demonstrated in this experiment. And this study shows that the isoflurane/remifentanil group was more reliable than the isoflurane/fentanyl group because the recovery time CV was lower. Therefore, isoflurane/remifentanil combination anesthesia could be a better choice than isoflurane/fentanyl anesthesia if the patient is severely ill and stable recovery time is needed.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.1
• /
• pp.91-97
• /
• 2007

The purpose of this study was to investigate the changes of various balls velocity under the different surface conditions after impact. For this study, four different balls were used which are golf ball, tang-tang ball, table tennis ball, and iron ball. And two different types of ground conditions were used which are artificial grass green and glass green. Movements of putter head and ball were recorded with 2 HD video cameras(60 Hz, 1/500s shutter speed). Small size control object($18.5cm{\times}18.5cm{\times}78.5cm$) was used in this study. To transfer the same amount of kinetic energy to the ball, pendulum putting machine was used. Analyzing the process of impact and the ball movement, a putter was digitized the whole movement but the ball was digizited within the 50cm movement. Velocities were calculated by the first central difference method(Hamill & Knutzen, 1995). Putter head velocities were about 112.2cm/s-116.2cm/s at impact. Maximum ball velocities were appeared 0.08s-0.10s after impact no matter what the ground conditions are. Table tennis ball recorded higher ball velocities than the other ball velocities and iron ball recorded the lowest ball velocity in this group. But Table tennis ball was influenced with the frictional force and immediately was decreased at the artificial grass green condition. If an object is received the kinetic energy under the static condition(v=0cm/s), the object recorded the maximum velocity shortly after the impact and then decreased the velocity because of the frictional force. The ball distance from the start position to the peak velocity position is about 6cm-10cm under the 112.2cm/s-116.2cm/s putting velocity with putter. 0.25 seconds later after impact balls were placed 40cm distance from the original position except iron ball. In this study, ball moving distances were too short therefore it was not possible to investigate the reactions after the translational force is disappeared. Rotational force would play a major role at the end of the ball movement. Future study must accept two things. One is long distance movement of ball and the other is balanced ground. Three-piece ball is a good item to investigate the golf ball movement on the different surface conditions.

• Journal of Acupuncture Research
• /
• v.17 no.3
• /
• pp.125-139
• /
• 2000

Study of the fourteen meridians that include name of P'ung(風) point. The results were summarized as follows. 1. Pyongp'ung(秉風) is located middle of the supraspinatous fossa(Small intestine Meridian, 手太陽小腸經). we can cute the local area disease and also use to cure the pathway of the Arm greater yang small intestine which is attacked by P'ung(風) disease. 2. Yep'ung(翳風) is located behind the lobule of the auricle, in the depression between the mastoid process and the mandible(Triple Energizer Meridian, 手少陽三焦經). we can cure the local area disease especially hyper yang disease and also use to cure the pathway of the Arm lesser yang triple energizer which is attacked by P'ung(風) and Yo'l(熱) disease. 3. P'ungmun(風門) is located 1.5 chon beside the lower end of the spine of the second thoracic vertebra(Bladder Meridian, 足太陽膀胱經). we can cure the local area disease and also use to cure the pathway of the Leg greater yang bladder which is attacked by P'ung(風) disease. 4. P'ungbu(風府) is located 1 chon above the middle of natural line of the hair at the back of the head, in the depression below the occiptal protuberance(Governor meridian, 督脈). It connects (Liver meridian, 足厥陰肝經) and Yin Link Vessel(陽維脈). we can cure the rigidity and pain in head and nape which is related Yin Link Vessel(陽維脈). 5. P'ungshi(風市) is located on the lateral part of the thigh, 7 hon above the patella(From the greater trochanter to the knee joint is 19 chon, Gallbladder Meridian (足少陽膽經). we can cure the local area disease(leg, knee, etc). 6. P'ungji(風池) is located Below the occipital bone, in the depression on the outer part of the trapezius muscle(Gallbladder Meridian, 足少陽膽經) on a level with P'ungbu(風府) (Governor vessel, 督脈). we can cure the local area disease and also use to cure the pathway of the Leg lesser yang gall bladder which is attacked by P'ung(風) disease.

• Journal of the Korea Concrete Institute
• /
• v.25 no.2
• /
• pp.217-224
• /
• 2013

Design provisions for the development length of headed bars in ACI 318-08 include concrete compressive strength and yield strength of headed bars as design parameters but do not consider the effects of transvers reinforcement. In addition, they have very strict limitation for clear spacing and material strengths because these provisions were developed based on limited tests. In this study, splice tests using SD600 headed bars with $2d_b$ clear spacing and transverse reinforcement were conducted. Test results show that unconfined specimens failed due to prying action and bottom cover concrete prematurely spalled. The contribution of head bearing on the anchorage strength is only 15% on average implying that unconfined specimens failed before the head bearing was not sufficiently developed. Confined specimens with stirrups placed along whole splice length have enhanced strengths in bearing as well as bond because the stirrups prevented prying action and improved bond capacity. Bond failure occurred in locally confined specimens where stirrups were placed only at the ends of splice length. The stirrups at ends of splice lengths can prevent prying action but the bond capacity did not increase. From regression analysis of test results, an equation to predict anchorage strength of headed bars was developed. The proposed equation consists of bond and bearing contributions and includes transverse reinforcement index. The average ratio of tests to predictions is 1.0 with coefficient of variation of 6%.

• Radiation Oncology Journal
• /
• v.7 no.2
• /
• pp.171-183
• /
• 1989

A general effect for cell proliferation has been incorporated into Roesch's survival equation (Accumulation Model). From this an isoeffect formula for the low dose-rate regimen is obtained. The prediction for total doses equivalent to 60Gy delivered at the constant dose-rate over 7 days agrees well with the dose-time data of Paterson and of Green, when the parameter ratio A/B (${\approx}{\alpha{\mu}}/2{\beta}\;where\;{\mu}$ is the repair rate) is chosen to be 0.7Gy/h. When a constant proliferation rate and known facts of division delay are assumed, an isoeffect relation between low dose-rate treatment and acute dose-rate treatment can be derived. This formula in the regimens where proliferation is negligible predicts exactly the data of Ellis that 8 fractions of 5 Gy/day for 7 days are equivalent to continuously applied 60Gy over 7days, provided the A/B ratio is 0.7 Gy/h and the $\alpha/\beta$ ratio is 4Gy. Overall agreement between the clinical data and the predictions made by the formula at the above parameter values suggests that the biologcal end points used as the tolerance level in the studies by Paterson, Green, and Ellis all agree and they are not entirely the early effects as generally assumed. The absence of dose-rate effects observed in the mouse KHT sarcoma can better be explained in terms of a large value for the A/B ratio. Similarly, the same total dose used independently of the dose-rate to treat head and neck tumors by Pierquin can be justified.

• Journal of Animal Science and Technology
• /
• v.64 no.6
• /
• pp.1046-1062
• /
• 2022

This study investigated the effects of L-glutamine (Gln) supplementation on growth performance, physiological traits, heat shock proteins (HSPs), and gene expression related to muscle and adipose tissue development in Hanwoo steers under heat stress (HS) conditions. Eight Hanwoo steers (initial body weight [BW] 570.7 ± 43.6 kg, months of age 22.3 ± 0.88) were randomly separated into two groups, control and treatment, and supplied with the concentration (1.5% of BW kg/day/head) and rice straw (1.5 kg/day/head). The treatment group were fed the Gln supplementation (0.5% of concentration, as-fed basis) once a day at 08:00 h. Blood samples for the assessment of haematological and biochemical parameters and the separation of peripheral blood mononuclear cells (PBMCs) were collected four times, at 0, 3, 6, and 10 weeks of the experiment. Feed intake was measured daily. BW to analyze growth performance and hair follicle collection to analyze the expression of HSPs were executed four times at 0, 3, 6, and 10 weeks. To analyze gene expression, longissimus dorsi muscle samples were collected by biopsy at the end of the study. As a result, growing performance, including final BW, average daily gain, and gain-to-feed ratio, were not different between the two groups. Leukocytes including lymphocytes and granulocytes, tended to increase in the Gln supplementation group (p = 0.058). There were also no differences in biochemical parameters shown between the two groups, except total protein and albumin, both of which were lower in the Gln supplementation group (p < 0.05). Gene expressions related to muscle and adipose tissue development were not different between the two groups. As temperature-humidity index (THI) increased, HSP70 and HSP90 expression in the hair follicle showed a high correlation. HSP90 in the hair follicle was decreased in the treatment group compared with the control group at 10 weeks (p < 0.05). Collectively, dietary Gln supplementation (0.5% of concentration, as-fed basis) may not be influential enough to affect growth performance and gene expression related to muscle and adipose tissue development in steers. However, Gln supplementation increased the number of immune cells and decreased HSP90 in the hair follicle implying HS reduction in the corresponding group.

• Journal of Industrial Convergence
• /
• v.20 no.5
• /
• pp.21-28
• /
• 2022

Unlike previous studies, this study looked at the effect of the ideological tendencies of local government heads on the social welfare budget as a longitudinal study. This study was made possible by the election of the head of a progressive group in Gumi-si, a stronghold of conservatives, after the implementation of the local self-government system. Therefore, in this study, the change process of the political ideological orientation of Gumi-si's heads and the social welfare budget by year were listed and time-series analysis was conducted using actual cases of Gumi-si, Gyeongbuk for more than 12 years. As a result of the analysis, first, as in the cross-sectional analysis, in the longitudinal study, the change in the rate of increase in the social welfare budget according to the political ideological tendencies of the head of the local government showed a meaningful difference. Second, as in the previous cross-sectional analysis, the social welfare budget increased in the year before the election. Third, the same change in the growth rate as in the second did not appear at the end of the third elected term. All studies on the relationship between the political ideological tendencies of local government heads (including local councils) and the social welfare budget have been cross-sectional. However, this study has great implications in terms of the results of the first longitudinal cross-sectional analysis.