• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.59-65
• /
• 2004

In this paper a numerical study was performed for the effect of the wall curvature on the behaviors of fuel sprays impinging on the concave Surface. Actually, in the real diesel engines, a piston head has a curved shape for the purpose of the controlling the movement of fuel droplets and the mixture formation. For past decades, although many experimental and numerical works had been performed on the spray/wall impingement phenomena, the curvature effect of impinged wall was rarely investigated. The wall curvature affects on the behaviors of the secondary droplets generated by impingement and the concave wall obstructs the droplets to advance from the impinging site to outward. In present study, the simulation code was validated for the flat surface case and three cases of the different curvature were calculated and compared with the flat surface case for several parameters, such as the spray radius, the spray height and the position of vortex center of gas phase. The simulation results showed that the radial advance of the wall spray and the vortex is decreased with increasing the curvature. It was concluded that the curvature of the impinged wall significantly affects the behaviors of both the gas-phase and the droplet-phase.

• Journal of Biosystems Engineering
• /
• v.11 no.1
• /
• pp.76-85
• /
• 1986

This study was intended to examine the failure characteristics and breakdowns of the head-fed type combines generally used on farms. The failure distribution was assumed to follow Weibull distribution function and the Weibull parameters of the major parts, units and combine as whole were estimated by using the data collected in a survey. A computer program for the estimation of the Weibull parameter was developed. Monte Carlo method was used in predicting the time between failures. The results of study may be summarized as follows: 1. The number of failures per combine was 4.83 times per year and 0.3 times per hectare of combines of different ages. 2. According to the Kolmogorov-Smirnov test method, it was proved that the Weibull distribution function is well fitted to the characteristics of the failure and breakdowns of combines. 3. Weibull parameters of failure distribution of the combine as a whole were estimated to give the shape parameter ${\beta}$=1.3089 and the scale parameter ${\alpha}$=105.2409. The combining area with 80% reliability was 1.1 ha, and the probability of operating the combine without any failure for a year, was $2.76{\times}10^{-4}$. 4. The mean time between failures (MTBF) of the combines was predicted to be 3.2 ha of operation, which corresponds to 32 hours of operation.

• Journal of Fashion Business
• /
• v.9 no.1
• /
• pp.137-151
• /
• 2005

The purpose of this study is to analyze body types of Chinese women and provide concrete information of body compatibility improvement of Chinese adult female clothing product to domestic ready-made clothes companies. As for the method of this study, statistical analysis is made of 111 items. This is done from June 23 to August 07, 2004. 1381 female subjects from age 19 to 50 participated in this study. They all live in Beijing and Shanghai in China. Data was analyzed by used SPSS/WIN10.0 Program. The results of this study are as follows. The important city(Beijing and Shanghai) the significant difference which body measuring hits especially appeared. The area dwelling woman in Shanghai appeared the height region and head region relation item a lot. The area dwelling woman in Beijing measuring appeared a lot from wide thick circumference length angle item. The upper half of body horizontal and vertical length compared to route with the obesity somatotype person it was investigated with the thing.

• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.44-60
• /
• 2017

This study is to understand the image of the Korean beauty and rewards to be gained by trying to be a beautiful person and to study differences according to demographic characteristics. It was studied with the purpose of industrializing beauty image and selling it to foreign countries. The survey questionnaire was distributed to Seoul and Kyeongkido. Respondents totaled 301. Collected data were analyzed with frequency analysis, factor analysis, $X^2$-test, and regression. Results are ; (1) The external image of Korean beauty emphasizes round face, white skin, big eyes, double eyelids, round head shape, early twenties, tall, low body weight, thin waist, long neck, long legs, and thin fingers. (2) The inner image of the Korean beauty emphasizes mature personality, social economic ability, but not housework, and cultural artistic ability. (3) Rewards gained by trying to be a beauty are psychological, actual, and social ones. (4) External face and body image of the beauty are different by demographic characteristics (sex, age, marital status, final education, monthly average income, religion). (5) The inner image of the beauty is different by age, final education, and monthly average income. (6) Rewards gained by trying to be a beauty are different by sex, age, final education, and monthly average income.

• Journal of Fashion Business
• /
• v.22 no.4
• /
• pp.93-105
• /
• 2018

Using FDM 3D printing, yarn shape and composition were modeled and 3D printed with PLA and TPU filaments currently used for apparel. Based on this, mechanical characteristics were measured to determine 3D printing yarn according to type of filaments in the 3D printed output and deformation and recovery characteristics due to differences in structure type. As a result of examining tensile and shear characteristics of PLA and TPU 3D printing compiles, TPU overall was measured with significantly lower stress than PLA. This is due to high elasticity of TPU's character, revealing that it has better flexibility than PLA. In addition, during deformation due to external forces, the more freedom between the head and foot parts of the loop, and the lower the force associated with each other, the more flexible it is. TPU revealed that it was easier to tension and recovery from tensile deformation than PLA, indicating potential for clothing materials using 3D printing. If high-molecular materials, such as PLA flexibility, it is likely to provide some flexibility through development of styles, including degree of freedom in modeling. Based on this, we provide basic data for developing 3D printing textures that can be satisfied with textile for apparel.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.32-37
• /
• 2003

For the reduction of electromagnetic biological effects from cellular phones, the electrical field radiation from cellular phone antenna is reduced by using partial ferrite material added on the phone case as ground plane. On the given properties (permittivity, permeability and conductivity) of ferrite material, the characteristics of monopole antenna is analysed depending on the variation of ferrite added configuration(thickness and shape). According to this analysis, the design method and direction to minimize the biological effects to human head is proposed in 1.7 GHz band PCS phones. For the exact analysis involving the permittivity, per-meability and conductivity of ferrite material, FDTD numerical method is used.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.729-732
• /
• 2000

Antifungal activities of domestic plants were examined to develop natural anti-microbial agents, able to protect onion from spoiling microorganisms during their storage. A fungus was isolated from spoiling onion and identified to Penicillium sp. ON-211, based on the morphological characteristics of conidiophore and conidia. Chloroform extracts of Juniperus chinesis Linnaeus, Juniperus. chi. var. horizontalis, water extract of Thujs orientalis Linnaeus' seed and the n-hexane extract of Juniperus. chi. var. horizontalis N. showed remarkable antifungal activties against this fungus.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.12
• /
• pp.1337-1340
• /
• 2004

The self-assembled monolayers of alkane derivatives with sulfur containing head groups on gold substrates have been widely examined recently, since the binding between S atoms and Au surface is strong. The viologen has been widely investigated their well-behaved electrochemistry including electron transfer mediation, the surface-enhanced of the adsorption and the behavior of supramolecular assemblies at electrode surfaces in theses and various studies. Yiologen monolayers are formed onto QCM by self-assembly method. We studied the relationship of electron transfer from changing the anions in 0.1 M NaCl and NaClO$_4$ electrolyte solution. The EQCM measurements revealed the anions transfer during reduction and oxidation, respectively From the EQCM data, the well-defined shape peaks were nearly equal charges by cyclic voltammetry.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.18 no.1
• /
• pp.167-176
• /
• 1988

This study was designed to evaluate the morphology of the temporomandibular joint components and dentofacial characteristics of patients with clicking and painful temporomadibular joint. The materials consisted of 80 conventional pantomographs in normal an symptomatic individuals aged 18-23 and divided into 2 groups by symptom of temporomandibular joint. The results were as follows; 1. In morphologic analysis of condylar head, type Ⅰ (anterior, posterior smooth curve) was most dominant in both group(58.75%, 55.0%) and asymmetrical condylar shape was predominant in symptomatic group (18 cases, 45%). 2. In symptomatic group, the condylar width were slightly lesser and the ratio of condylar height to height of condyle-ramus were larger than those of normal group. 3. Vertical overlap of central incisor of symptomatic group was slightly larger than that of normal group. There was significant differences between each group in mandibular midline deviation. 4. The symptomatic group tended to steep mandibular plane angle and the degree of condylar path and condylar axis of normal group were larger than those of symptomatic group. 5. The condylar width was inversely correlated with inclination of condylar path and inclination of condylar path was correlated with condylar axis in both groups.

• Physical Therapy Korea
• /
• v.2 no.2
• /
• pp.108-118
• /
• 1995

The techniques of joint mobilization and traction are used to improve joint mobility or to decrease pain by restoring accessory movements to the shoulder joints and thus allowing full, nonrestriced, pain-free range of motion. In the glenohumeral joint, the humeral head would be the convex surface, while the glenoid fossa would be the concave surface. The medial end of the clavicle is concave anterioposteriorly and convex superioinferiorly, the articular surface of the sternum is reciprocally curved. The acromioclavicular joint is a plane synovial joint between a small convex facet on lateral end of the clavicle and a small concave facet on the acromion of the scapula. The relationship between the shape of articulating joint surface and the direction of gliding is defined by the Convex-Concave Rule. If the concave joint surface is moving on a stationary convex surface, gliding occur in the same direction as the rolling motion. If the convex surface is moving on a stationary concave surface, gliding will occur in an opposite direction to rolling. Hypomobile shoulder joints are treated be using a gliding technique.