• Title/Summary/Keyword: Head shape

검색결과 791건 처리시간 0.021초

두경부 환자의 VMAT 시 체형변화와 환자 정렬과의 상관관계 고찰 (Evaluate the Change of Body Shape and the Patient Alignment State During Image-Guided Volumetric Modulated Arc Therapy in Head and Neck Cancer Patients)

  • 서세정;김태우;최민호;손종기
    • 대한방사선치료학회지
    • /
    • 제29권2호
    • /
    • pp.109-117
    • /
    • 2017
  • 목 적: 두경부 환자가 입체적 세기변조 회전 방사선치료 시 변화하는 체형과 환자 정열 상태를 조사하고 그에 따라 치료 시 발생하는 선량분포의 변화와 적절한 재 CT 모의치료의 필요성을 평가하고자 한다. 대상 및 방법: 근치적 목적으로 방사선 치료를 시행한 두경부암 89명에 대해 입체적 세기변조 방사선치료계획을 수립하고 치료 기간 동안의 체중을 측정하였다. 그 중 10명의 환자에 대하여 체형변화를 평가하였다. ARIA software(Offline review)를 이용하여 ramus, chin, posterior neck, clavicle 등의 landmark를 지정한 후 skin까지의 거리를 측정하여 차이를 분석하였다. 결 과: 남성 60명을 대상으로 치료시행 $17{\pm}4$회에서 re-CT 모의치료를 시행한 결과 체중 감소율이 $-6.47{\pm}3.5%$로 나타났으며, 여성 29명은 경우는 $17{\pm}5$회에서 체중 감소율이 $-5.73{\pm}2.7%$로 나타났다. 피부위축(Skin shrinkage) 변화를 관찰한 결과 대표 landmark에서의 표준편차는 C1(${\pm}0.44cm$), C3(${\pm}0.83cm$), C5(${\pm}1.35cm$)로서 0.5 kg 감소 당 약 1 mm shrinkage 발생함을 알 수 있었다. 치료 횟수에 따른 피부위축은 1~4 fx (변화 없음), 5~13 fx (-2 mm), 14~22 fx(-4 mm), 23~30 fx(-6 mm)로 나타났다. 결 론: 체형이 약 5 mm 변화하게 되면 중심부 선량은 약 3 % 이상 차이나기 시작하게 되므로 적응증치료에 필요한 CT 모의치료를 추가로 진행하여야만 한다. 또한 적극적으로 lower neck의 CT 모의치료 방법 및 set up 방법에 관하여 연구하고 새로운 고정용구(Immobilization device)의 사용도 검토할 필요가 있다.

  • PDF

모형 정치망의 흐름에 대한 거동 (Dynamic Behavior of Model Set Net in the Flow)

  • 정기철;권병국;이주희
    • 수산해양기술연구
    • /
    • 제33권4호
    • /
    • pp.275-284
    • /
    • 1997
  • 우리 나라 남해안 연안에 부설된 소형정치망을 실험 수조의 크기 등을 고려하여 그 의 1/50의 크기로 Tauti의 어구 비교법칙에 따라 모형어구를 제작하여 유향 R(원통에서 헛통방향으로).L(헛통에서 원통방향으로)방향과 각각의 유속에 따라 그물 형상의 변화, 각 뜸의 침하량, 멍줄 장력의 변화 들을 측정, 관찰한 결과를 요약하면 다음과 같다. 1. 그물형상의 변화는 유향 R의 경우 유속 0.2m/sec에서 헛통 끝그물이 조하쪽으로 20mm, 상방으로 10mm 이동어구 전체가 바닥으로부터 부상하였고, 유속 0.6m/sec에서는 원통에서 헛통 까지 거의 일직선을 이루었다. 유향 L의 경우는, 상방으로 18mm 이동하여 어구 전체가 바닥으로부터 부상하였고, 유속 0.5m/sec이상에서는 헛통에서 원통까지 거의 일직선을 이루었다. 2. 긱 뜸의 침하량은 유향 R의 경우 머리뜸은 유속 0.2m/sec부터 서서히 침하하시 시작하여, 유속 0.3m/sec에서는 20mm 정도 침하하고, 유속 0.6m/sec에서는 99mm 정도 침하하였다. 그러나, 끝뜸은 유속 0m/sec부터 0.6m/sce까지 침하하지 않고 약간의 요동만 일으켰다. 유향 L의 경우 끝뜸은 유속 0.1m/sec에서부터 서서히 침하하기 시작하여, 0.2m/sec에서는 5mm정도 침하하였고, 0.6m/sec에서는 108mm 정도 침하하였으며, 0.5m/sec에서 머리뜸만 남기고 어구전체가 수몰되기 시작하였다. 3. 멍줄 장력의 변화는 유향 R의 경우 머리뜸 멍줄에 작용한 장력은 유속 0.1m/sec에서 273.51g이며, 0.6m/sec에서는 1298.40g 정도로 증가하였다. 유향 L의 경우 한쪽 끝뜸줄에 걸리는 장력은 유속 0.1m/sec에서 137.08g이며, 0.6m/sec에서 646.00g 정도로 증가하였다. 멍중 장력의 분포는 유속의 증대와 함게 유향 RL 향 모두 조상측 멍줄에 집중하여 나타났으며, 다른 멍줄에는 현저한 장력의 증가는 관측되지 않았다.되지 않았다.

  • PDF

Paraquat에 의해 유도된 Superoxide Dismutase 결핍 효모의 산소 독성 (Oxygen Toxicity of Superoxide Dismutase-Deficient Saccharomyces cerevisiae by Paraquat)

  • 김지면;남두현용철순허근
    • KSBB Journal
    • /
    • 제10권5호
    • /
    • pp.561-567
    • /
    • 1995
  • 활성산소 소거 효소인 superoxide dismutase (SOD)가 결핍된 효소 변이주들을 대상으로 하여, 활성산소 유발물질인 paraquat을 배지에 첨가하여 배양하면서 산소 독성을 관찰하였다. 호기 상태에서 는 MnSOD (mitochondria SOD) 결핍 효모는 CuZnSOD (세포질 SOD) 결핍 효모보다 성장이 많 이 저하되었지만, 혐기 상태에서는 이들 SOD 결핍 효모 모두 성장 속도에서 야생 효모와 큰 차이를 보이지 않았다. Paraquat으로 처 리한 결과, 호기 배양 에서 CuZnSOD 결핍 효모는 O.OlmM 이상에서 성 장하지 않음을 알 수 있었다. 따라서 O.OOlmM paraquat을 배지에 첨가한 후 호기적으로 배양하면서 세포내 성분의 변화를 관찰하였더니, CuZnSOD 결핍 효모에셔는 catalase 역가가 떨어진 반면 glutathion peroxidase 역가와 세포막 지질의 과산 화물이 증가하였으며, MnSOD 결핍 효모에서는 catalase 역가와 glutathion peroxide 역가가 모두 조금씩 증가하면서 세포막 지질의 과산화물은 그다지 변화하지 않았다. 이러한 사실로부터 CuZnSOD 가 없는 경우 활성산소 소거계로써 catalase 보다 glutathion peroxidase가 훨씬 활성화되어지지만, 이렇게 활성화된 glutathion peroxidase로는 세포질내 산소 radical을 완벽히 제거하는데에는 다소 불충분 하다는 사실을 알 수 았었다. 한편, 혐기적 배양에서 는 SOD 결핍 효모들의 catalase 역가는 모두 감소 한 반면, glutathion peroxidase 역가는 다소 증가하였고, 또한 세포막 지질의 과산화물은 다소 감소하는 추세를 보였다. 이는 혐기 상태에서 산소 radical 이 소량밖에 생기지 않으므로, 활성화된 glutathion p peroxidase에 의해 어느 정도 극복되어지기 때문인 것으로 사료된다. 두 집단 간에 어느 정도 방향성은 있는 것으로 판단된다.ds for eagerness for lasting life not only in this world but also in the other world., Keun-Kap, Scarf, Pee-Bak, Hung-Kap, Pok-Kap, Yang-Dang-Kap, We-Yo-Kap, Kum-Kap, and caries arms. Lower-level officials wore Pe-Bal, Kun-Mo, gae, won-leung, very small sleve jacket, a long coat reaching up to the knee length, slacks, belt, loin cloth and apron. 5) Children's bind their hair up angle shape and wore a half long jacket raching up to the hip and slacks. 나) Women's wear; 1. hair style and hair dress; 1) High rank women's hair style was very extravaganceful. They made their hair top knot (one, two, or more knots) and decoraed precious stone, pan shape head dress, wheel shape head dress, and flower shape precious stone decorated head dress. 2. Clothes ; 1) High rank ladi's wore Kun-Kyun attached jacket, and jacket sleeves decorated pleats, and pleats decorated long skirt, apron, back apron, knot belt, scarf, this type is the same

  • PDF

생목 삽입용 볼트 모양의 UHF RFID 태그 안테나 설계 (Bolt Shape UHF RFID Tag Antenna for Insertion to a Tree)

  • 정유정;전병돈
    • 한국전자파학회논문지
    • /
    • 제23권2호
    • /
    • pp.270-273
    • /
    • 2012
  • 고유전율인 나무에 삽입 가능한 플라스틱 볼트 형태의 UHF RFID 태그 안테나를 설계하였다. 생목(生木)의 관리를 위하여 태그를 삽입용으로 볼트의 머리 부분에 설계를 하였다. 일반 태그는 고유전율인 나무에 근접하면 태그 안테나의 임피던스 특성이 변하여서 거의 동작을 하지 않으므로, 나무의 유전율을 고려하여 플라스틱 볼트의 머리 부분에 태그를 삽입하여 UHF RFID 태그 안테나를 설계 제작하였다. 반사 계수의 크기와 인식 거리를 측정 비교하였다. 이 볼트형 태그를 나무에 삽입하여 나무의 위치나 나무의 상태 등을 관리할 수 있도록 하였으며, 또한 가로수나 기타 볼트가 사용될 수 있는 물체나 장소에 적용이 가능하다.

망지를 이용한 트롤 탈출장치 개발 (Development of a Trawl Escapement Net using net material)

  • 조삼광;신종근;차봉진;양용수
    • 수산해양기술연구
    • /
    • 제44권3호
    • /
    • pp.165-173
    • /
    • 2008
  • Sea experiment for this study was carried out to develop a Trawl Escapement Net(TEN) using net material to improve the survival rate of undersized fishes that escaped from trawls in the Korean southern sea in May and November, 2005. Three kinds of Trawl Escapement Net(TEN) were examined to increase the escapement rate for fishes escaped from the TEN, and total catches in the codend and cover-net were investigated. The main catch species in the experimental fishing trials using a V shape TEN(A type) in May were Korean pomfret(Pampus echinogaster), slimy(Leiognathus nuchalis), gizzard shad(Konosirus punctatus), white croaker(Pennahia argentata) and smelt(Sillago sihama). In the experimental fishing trials using a V shape TEN with a protector for undersized fishes(B type) and a panel shape TEN with a protector(C type) in November, the main catch species were horse mackerel(Trachurus japonicus), sea pike (Sphyraena japonica), large-head hairtail(Trichiurus lepturus), kammal thryssa(Thryssa kammalensis), white croaker(Pennahia argentata), butterfish(Psenopsis anomala) and red gurnard(Lepidotrigla microptera). Most of large-sized fish species like Korean pomfret and Spanish mackerel could not escape through the TEN in the B type and C type. Catches of horse mackerel were highest in the experimental fishing of November and escapement rates for most fish species including horse mackerel were higher in the C type compared with B type.

실험실 사육에 의한 두토막눈썹참갯지렁이, Perinereis aibuhitensis(Grube)의 저질 선택성과 굴의 형태 (Sediment Preference and Burrow Shape of the Polychaete, Perinereis aibuhitensis according to the Laboratory Culture)

  • 강경호;이재학;유성규;장영진
    • 한국수산과학회지
    • /
    • 제30권4호
    • /
    • pp.634-639
    • /
    • 1997
  • 한국산 갯지렁이류 중에서 산업적으로 가장 중요한 청충의 양식기법 개발에 관한 기초자료를 얻기 위하여, 청충의 서식생태에 관하여 조사한 결과는 다음과 같다. 1. 청충은 입경이 0.10mm 이하인 저질에서 가장 좋은 일간 성장률과 생존율을 보였다. 2. 유리 수조 실험 결과, 청충이 저질 속에 잠입하여 만든 굴의 형태는 J형, L형, O형, S형, Y형 및 I형 등이 었고, 한 개의 굴에 한 개체가 서식하는 것이 일반적이었으며, 배설시 청충의 체위는 굴 속에서 두부와 미부를서로 반전하여 항문을 굴밖의 저질 표면에 노출 시킨채로 배설하였다. 3. 청충이 저질속에 잠입하는 깊이는 10cm 전후의 저질이며, 먹이를 먹기 위해서는 굴 밖으로 몸체를 완전히 이탈하여 이동하였다.

  • PDF

완전자동화된 단속적 재료 공급식 가변적층 쾌속조형공정 밀 장치 개발에 관한 연구 (Investigation Into the Development Of Automatic VLM-ST (VLM-STA) Process and Its Apparatus)

  • 양동열;안동규;이상호;김효찬;박승교
    • 한국정밀공학회지
    • /
    • 제21권4호
    • /
    • pp.109-119
    • /
    • 2004
  • Rapid prototyping (RP) technologies have been widely used to reduce the lead-time and development cost of new products. $VLM-_{ST}$ process has been developed to overcome the currently developed RP technologies such as a large building time, a high building cost, an additional post-processing and a large apparatus cost. $VLM-_{ST}$ process requires an additional human interaction due to the manual stacking and bonding. Hence, building time, building cost and the part quality are dependent on the skill of labor. A novel RP process, fully automated $VLM-_{ST}$ process ($VLM-_{ST}$), has been developed to improve building efficiency of the process and the human dependency of the part. The objective of this work is to propose a $VLM-_{ST}$ process and to develop an apparatus for implementation of the process. $VLM-_{ST}$ process and its apparatus have various technical novelties such as two step cutting using a rotating table, an automatic stacking method using two pilot holes and two reference shapes, a concept of automatic unit shape layer (AUSL), and an automatic bonding using the bonding roller and building magazine. In order to examine the efficiency and the applicability of the proposed process, various three-dimensional shapes, such as a piston, a human head shape and a human bust shape, were fabricated on the apparatus.

월류 파력 발전 구조물 통합 축소 모형 시험을 통한 월류 성능 및 제어 시스템에 관한 실험적 연구 (Experimental Study for Overtopping Performance and Control System of Overtopping Wave Energy Convertor)

  • 박지용;신승호;홍기용
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제14권1호
    • /
    • pp.11-18
    • /
    • 2011
  • 암초형 월류 파력발전 시스템은 암초형 구조물에 입사 되는 파랑 에너지를 낙차로 전환하고 이를 전기 에너지로 변환 시키는 파력 발전 방식이다. 기존 연구에서 월파제의 사면 경사, 천단고, 가이드 베인 형상에 따른 월류 성능이 연구 되었다. 본 연구에서는 이러한 기존 연구를 통해 설계된 1/7 축소 모형을 제작하고 수차 터빈 및 발전 시스템, 전력제어시스템, 운전제어 및 모니터링 시스템을 연계하여 통합 축소 모형 시스템을 구축하였다. 이러한 시스템에서 서로 다른 파고와 주기를 갖는 파에 따른 월류량과 발전량을 계측하여 기존 연구와 비교 검증하였다. 이를 통해 설계시 계획한 월류량과 발전량을 확인하였고 다수 터빈에 의한 효율적인 제어 시스템 구동 방안을 제안하였다.

경두개방사선사진과 측방 개별화 단층방사선사진을 이용한 하악과두의 형태와 위치에 관한 연구 (A RADIOGRAPHIC STUDY OF MANDIBULAR CONDYLE SHAPE AND POSITION: A COMPARISON OF TRANSCRANIAL RADIOGRAMS AND INDIVIDUALIZED CORRECTED TOMOGRAMS)

  • 이상래;황의환
    • 치과방사선
    • /
    • 제27권1호
    • /
    • pp.25-41
    • /
    • 1997
  • The purpose of this study was to observe mandibular condyle shape and position in an asymptomatic population. In order to carry out this study, 142 temporomandibular joints in 71 adults(35 males, 36 females), who were asymptomatic for temporomandibular joint disorders and had no history of prosthodontic or orthodontic treatments, were selected, and radiographed using the Accurd-200 head holder(Denar Co., U.S.A) for transcranial radiograms and the Sectography(Denar Co., U.S.A) for lateral individualized corrected tomograms. Mandibular condyles were classified morphologically and evaluated in positional relationships with articular fossae and articular eminences at centric occlusion and 1 inch mouth opening. The obtained results were as follows; 1. In the classification of mandibular condyle shape, the convex type was more prevalent in transcranial radiograms and tomograms taken at medial, central, and lateral locations. 2. In the mandibular condyle position at centric occlusion, the mandibular condyles were placed posterior to the center of articular fossae in transcranial radiograms and anterior to the center of articular fossae in tomograms taken at medial, central, and lateral locations. 3. In the mandibular condyle position in right and left TMJs at centric occlusion, the mandibular condyles were placed bilateral asymmetric relationships to the articular fossae in transcranial radiograms and tomograms taken at medial, central, and lateral locations. 4. In the mandibular condyle position at 1 inch mouth opening, the mandibular condyles were placed anterior to the articular eminences in transcranial radiograms and tomograms taken at central location and posterior to the articular eminences in tomograms taken at medial and lateral locations.

  • PDF

항공기의 형상에 따른 표면에서의 유동해석에 관한 융합 연구 (A Convergent Study on Flow Analysis at the Surface due to Shape of Aircraft)

  • 오범석;조재웅
    • 한국융합학회논문지
    • /
    • 제11권7호
    • /
    • pp.151-155
    • /
    • 2020
  • 본 연구에서는 항공기의 형상에 따른 유동의 속도 분포와 압력을 해석하여 그 비행 성능을 조사하였다. 비행기에 표면에 부하되는 유동 속도와 그 압력을 서로 비교하기 위하여 뚜렷한 형상의 항공기들로서, Model A와 B는 뭉툭하고 날카로운 형상을 지니고 있다. 비행기 주위에 흐르는 유동의 최대속도가 적을수록 운행의 저항이 덜 발생하여 연료 소모가 줄어든다는 것을 유추할 수 있으며 이는 뭉툭한 model A보다 날카로운 model B 가 더 효율적인 것을 확인할 수 있다. 본 연구 결과로서는 날개 부위와 본체의 헤드 부분을 몸체보다 큰 압력을 견딜 수 있게 설계해야 하며 뭉툭한 형태인 Model A로 설계하였을 때보다 Model B인 날카로운 형태로 하면 유동에 의한 압력을 보다 더 버틸 수 있다고 보인다.