• 제목/요약/키워드: Head shape

검색결과 791건 처리시간 0.021초

전자어류도감을 위한 영상검색 (Image Retrieval for Electronic illustrated Fish Book)

  • 안수홍;오정수
    • 한국통신학회논문지
    • /
    • 제36권4C호
    • /
    • pp.226-231
    • /
    • 2011
  • 본 논문은 기존 어류도감을 개선하기 위해 기존 어류도감에 IT 기술들이 적용된 전자어류도감의 개념을 도입하고 이를 위한 영상검색 알고리즘을 제안한다. 영상검색은 전자어류도감의 핵심이고 기존 어류도감을 압도하게 하는 기술이다. 어류는 동종일지라도 형태, 컬러, 질감에서 다른 특징들을 갖고, 심지어 동일 어류도 촬영 시의 자세나 주변 환경에 의해 다른 특징을 갖기 때문에 형태, 컬러, 질감의 단순한 특징을 이용하는 기존 영상검색은 전자어류도감에 적합하지 못하다. 제안된 영상검색은 어류의 머리, 몸통, 꼬리에서 추출된 상세 특징들을 채택하고, 특징들에는 그들의 불변성에 따라 가중치가 다르게 주어진다. 시뮬레이션 결과들은 제안된 알고리즘이 기존 알고리즘을 훨씬 능가하는 것을 보여준다.

증례 보고: 2개의 종괴를 모방하는 볼 지방 덩이에서 유래한 거대 지방종 (Case Report: A Giant Lipoma from the Buccal Fat Pad Resembling Two Different Masses)

  • 김태운;김상화
    • 대한두경부종양학회지
    • /
    • 제36권2호
    • /
    • pp.69-72
    • /
    • 2020
  • We report a surgically challenging case of a large lipoma located from the temple, across the zygomatic region to the buccal area, resembling two different masses. An 82-year-old man presented with two persistently growing soft masses at his left temple and cheek. A computed tomographic scan revealed a single large radiolucent mass extending from the submuscular layer of the left temple crossing beneath the zygomatic arch to the buccal region, rather than two individual masses. Excision was performed through upper gingivobuccal and temporal incisions. The mass was dissected through both incisions, cut in half, and extracted from both sides. No complications were observed. The biopsy result was consistent with a lipoma. Four months later, the scars were inconspicuous, and the patient was satisfied. Considering the size, shape, and location, this is a rare and intriguing case. The bi-directional approach allowed for successful total excision without any complications, leaving inconspicuous scars.

무지 외반증의 진단 및 병태생리 (Diagnosis and Pathophysiology of Hallux Valgus)

  • 장규선;김태완;김학준
    • 대한족부족관절학회지
    • /
    • 제18권2호
    • /
    • pp.43-47
    • /
    • 2014
  • Hallux valgus is a lateral deviation of the first phalanx and medial deviation of the first metatarsal at the first metatarsophalangeal (MP) joint. Its incidence has increased due to developing footwear. The etiologies include fashion footwear, genetic causes, anatomical abnormality around the foot, rheumatoid arthritis, and neuromuscular disorders. Physiologic alignment of the first MP joint is maintained by congruent and symmetric alignment of the articular surface of the first proximal phalanx and first metatarsal head, physiologic relationship of the distal first metatarsal articular surface and the first metatarsal shaft axis, and stable balance of soft tissue around the first MP joint and stable tarsometatarsal joint. Several factors have been associated with hallux valgus, including pes planus, hypermobility of the first tarsometatarsal joint, flattened shape of the first metatarsal head, increased distal metatarsal articular angle, and deformation of the medial capsular integrity. History and physical examination are very important to diagnosis of hallux valgus. Simple radiography provides information on deformity, particularly in weight-bearing anteroposterior and lateral radiographs. Understanding the etiologies and pathophysiology is very important for success in treatment of patients with hallux valgus.

Implant 보철물 access hole의 깊이에 관한 연구 (RELALTIONSHIP BETWEEN THE DEPTH ACCESS HOLE AND PROSTHETIC COMPONENTS IN SCREW RETAINED IMPLANTS)

  • 고석민;변태희;이재봉
    • 대한치과보철학회지
    • /
    • 제40권4호
    • /
    • pp.374-385
    • /
    • 2002
  • A total of 605 implant fixture prosthesis delivered by 3 clinics and 2 laboratories were examined in this study, The object of this study was to determine the proper length of screw head. The depth of access hole were measured and compared to the type of fixture, abutment, gold screw and prosthesis. The results were as follows : 1 The average number of fixtures per patient were 2.97. 2. The number of fixture installed in the upper posterior area are 327(55.56 %), the upper posterior area 171 (28.25%). 3. The depth of access hole is 4.23 mm in shallow area, and 5.46 mm in deep area and the differences were 1.23 mm. 4. The average depth of the aceess hole of the UCLA abutment were 5.02 mm. 5. The number of 4-5 mm access hole depth were 60(22.39%) in abutment screw level and the number of 4-5 mm depth in fixture level were 101 (29.19%). 6. In the shape of screw head, hexed type were 576(95.21%), slotted type were 29(4.79%).

원자로 내 핵연료조사시험용 압력용기조립체 설계 (Design of Vessel Assembly for Fuel Irradiation Test in Reactor)

  • 박국남;이종민;지대영;박수기;이정영;김영진
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 추계학술대회
    • /
    • pp.383-387
    • /
    • 2004
  • The Fuel Test Loop (FTL) consists of In-Pile Test Section (IPS) and Out-of-Pile System (OPS). The test condition in IPS such as pressure, temperature and quality of the main cooling water, can be controlled by the OPS. The FTL has been developed to be able to irradiate three pins to the core irradiation hole (IR1 hole) by considering for its utility and user's irradiation requirement. The IPS vessel assembly (IVA) consists of IPS head, outer pressure vessel, inner pressure vessel, inner assembly and test fuel carrier. The IVA is approximately 5.6 m long and fits within a 74 mm in diameter envelope over the full height of the chimney. Above the top of the chimney, the head of the IPS is enlarged to allow the closure flanges and pipe work connections. IVA was designed to test the CANDU and PWR nuclear fuel pin together. Specially, wished to minimize interference by nuclear fuel change in design and synthesize these items and shape design for IVA.

  • PDF

탈모(脫毛)에 대(對)한 문헌적(文獻的) 고찰(考察) (Bibliographic Studies of Depilation)

  • 장해영;최관호;김성현;권기록;김병우
    • 대한약침학회지
    • /
    • 제5권2호
    • /
    • pp.92-108
    • /
    • 2002
  • According to the bibliographic studies of Depilation, the following conditions were made after literary studies.; 1. According to the period, The depilation have been named variously, for example, Balta(髮墮), Balgu(髮去), Balrak(髮落), Mobal(毛拔), Yupung(油風), Dokchang(禿瘡), Guijidu(鬼?頭), Dokban(禿班), etc. 2. The cause of depilation was deficiency of kidney(腎虛), defciency of Qi of the lung(肺氣虛), excessive heat of blood system(血熱), deficiency of Qi and blood system(氣血虛), deficiency of blood system(血虛), and endogenouse cause of, etc. 3. The depilation is meaning fallen hair in head. There are multiform type in the symptoms of depilation; round shape, ellipse type & bald head. 4. The herbal treatment was used Yukmijihwaghwan(六味地黃丸), Palmihwan(八味丸), Singihwan(腎氣丸), Hwangigunjungtang(黃耆建中湯), Samultang(四物湯), ect. and external herbal reatment was Sineungyangjindan(神應養鎭丹), Bangpungtongsungsan(防風通聖散), ect.

An Experimental Investigation on Reduction of List Angle of a Semi-submersible Platform in Head Sea

  • Kim, Nam Woo;Nam, Bo Woo;Choi, Young Myung;Hong, Sa Young
    • Journal of Advanced Research in Ocean Engineering
    • /
    • 제1권3호
    • /
    • pp.168-175
    • /
    • 2015
  • This study consists of an experimental investigation of the reduction of the second-order roll motion of a semi-submersible platform in head sea conditions by adding hull damping. The second-order heave drift force and roll drift moment are known to be the main triggers that induce the list angle (Hong et al., 2010). Hong et al. (2013) used numerical calculations to show the possibility of reducing the list angle by changing the pontoon shape and adding a damping device on the hull. One of their findings was that the reduction in the list angle due to the increase in pontoon surface damping was significant. A series of model tests were carried out with a 1:50 scaled model of semi-submersible at the KRISO wave basin. The experiments indicated that adding damping on the hull surface effectively suppressed the list angle.

시각작업의 배경 조건과 8개 Meridian을 고려한 시각영역의 생성 (Generation of Visual Field Considering 8 Meridians and Background Conditions of Visual Tasks)

  • 기도형;김형수;정의승;강동석
    • 대한산업공학회지
    • /
    • 제23권3호
    • /
    • pp.533-544
    • /
    • 1997
  • Among numerous factors that have an effect on visual field, the effects of background condition on the size of the visual field were investigated to obtain more practical visual field that can be readily applicable to industrial settings. A visual experiment was conducted, in which the subject was instructed to search a target with distinct orientations. Size contrast, meridian, nontarget density, and subject's gender showed a significant effect on the size of the visual field at $\alpha=0.01$. The size of the visual field was linearly proportional to size contrast, and inversely proportional to density. Female's visual fields were found to be significantly larger than male subjects', The size of the visual field on horizontal axis was larger than that on vertical axis, and the size of the head & eye field on right meridian was also larger than that on left meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. The regression equations to predict the visual fields on the given background condition were suggested. The visual fields suggested in this study would be valuable to the design of visual displays and the panel layout of various displays and controls.

  • PDF

두경부 환자의 3D Printing을 이용한 Silicon Bolus의 유용성 (Usefulness of Silicon Bolus Using 3D Printing of Head and Neck Patients)

  • 권경태;이용기;원영진
    • 한국방사선학회논문지
    • /
    • 제13권7호
    • /
    • pp.909-916
    • /
    • 2019
  • 구강 및 두경부 암의 방사선치료 시 치료 범위에 피부를 포함하는 경우가 많으며 이때 볼루스의 사용이 빈번해진다. 특히 턱 부분의 요철로 인하여 환자의 적용 시 선량 불확실성을 제공한다. 본 연구에서는 3D Printing을 이용하여 Gel 볼루스와 Poly lactic acid(PLA), Silicon을 적용한 환자 맞춤형 볼루스를 제작하여 물성 특성을 확인하고, 제작된 볼루스와 치료계획의 불일치성을 확인하며, 실제 방사선 선량 전달시 발생하는 선량불확실성을 측정하였다. 그 결과 일반적인 요철 부위에는 PLA 재질의 볼루스가 안정적이며, 요철이 심하거나 환자의 체형이 자주 바뀔 수 있는 환자의 경우 Silicon 재질의 볼루스가 유용할 것으로 사료된다.

Improvement of Lubrication Characteristics in Fuel Injection Pump for Medium-Speed Diesel Engines: Part I - Application of Profile Shape

  • Hong, Sung-Ho
    • Tribology and Lubricants
    • /
    • 제31권5호
    • /
    • pp.205-212
    • /
    • 2015
  • In this research, effects of profile changes of stem section of the plunger on the lubrication characteristics of a fuel injection pump (FIP) were evaluated by hydrodynamic lubrication analysis. The clearance between plunger and barrel was divided into two regions, head and stem. The head was not involved in preventing a decrease of fuel oil pressure. So, research efforts were focused on both edges of the plunger’s stem. The two -dimensional Reynolds equation was used to evaluate lubrication characteristics with variations in viscosity, clearance and profile for a laminar, incompressible, unsteady-state flow. Moreover, the equilibrium equation of moment and forces in the vertical and horizontal directions were used to determine the motion of the plunger. The equations were discretized using the finite difference method. Lubrication characteristics of the FIP were investigated by comparing the dimensionless minimum film thickness, or film parameter, which is the ratio of minimum film thickness to surface roughness. Through numerical analyses, we showed that the profile of the lower edge of the stem had no effect on lubrication characteristics, but the profile of the upper edge had a significant influence on lubrication characteristics. In addition, changes in the profile were more effective in improving lubrication characteristics under low viscosity conditions.