• Herbal Formula Science
• /
• v.15 no.1
• /
• pp.37-47
• /
• 2007

許浚(Heo Jun), the best physician on his day, wrote 東醫寶鑑(DongEuiBoGam, 1613) based on his clinical experience as a court doctor and life-long study of over 500 medical books. Now most clinicians consult 東醫寶鑑(DongEuiBoGam) for its practicality. And it is also considered as one of the most valuable medical books for basic medical studies. As 許浚(Heo Jun) mentioned on the 東醫寶鑑(DongEuiBoGam) preface. we should practice flexibility on the interpretation of the medical classics instead of binding ourselves to the precedents. But worship of 東醫寶鑑(DongEuiBoGam) may hinder the studying of new pathways. The treatment and its understandings of a disease should be based on objectivity of observation. Finding the common traits of the recipes in 東醫寶鑑(DongEuiBoGam) is important for the study of 東醫寶鑑(DongEuiBoGam). Accordingly, group synthesis of symptoms and resultant classification of recipes are vital. In this research, symptoms listed in the head part(頭門) of External Shape vol. I(外形篇 卷1) of 東醫寶鑑(DongEuiBoGam) are synthesized into 3 different parts: head-wind syndrome(頭風證), dizziness(眩暈), headache(頭痛). Classification of prescriptions according to these 3 parts is also suggested.

• Korean Journal of Head & Neck Oncology
• /
• v.26 no.2
• /
• pp.204-211
• /
• 2010

Background and Objectives : Boundary detection and drawing are essential in 3D reconstruction of neck mass. Manual tracing methods are popular for drawing head and neck tumor. To improve manual tracing, circular boundaries overlapping was tried. Materials and Methods : Twenty patients with neck tumors were recruited for study. Representative frames were examined for shapes of outline. They were all single closed curves. Circular boundaries were added to fill the outlines of the tumors. Inserted circles were merged to form single closed curves(Circular boundary overlapping, CBO). After surface rendering, 3 dimensional images with volumes and area data were made. Same procedures were performed with manual tracing from same cases. 3D images were compared with surgical photographs of tumors for shape similarity by 2 doctors. All data were evaluated with Mann-Whitney test(p<0.05). Results : Shapes of boundaries from CBO were similar with boundaries from manual tracing. Tumor outlines could be filled with multiple circular boundaries., While both boundary tracing gave same results in small tumors, the bigger tumors showed different data. Two raters gave the similar high scores for both manual and CBO methods. Conclusion : Circular boundary overlapping is time saver in 3 dimensional reconstruction of CT images.

• Applied Microscopy
• /
• v.43 no.2
• /
• pp.47-53
• /
• 2013

The trichomes on leaves of three species of Mentha such as M. spicata, M. suaveolens, and M. piperita var were examined by scanning electron microscopy. Simple non-glandular trichomes and peltate glandular trichomes were distinctively occurred on these leaves. In M. spicata, short and sharp non-glandular trichomes were dominantly appeared on adaxial surface, whereas capitate glandular trichomes were commonly localized on abaxial surface. In M. suaveolens, non-glandular trichomes were identified with simple unbranched and branched. Unbranched trichomes which were sharp and pointed in shape occurred on adaxial surface, however, branched and v-shaped trichomes appeared abundantly on abaxial surface. Peltate trichomes consisted of a large eight-celled head. Small capitates trichomes consisted of a cylindrical head with an one-celled uniseriate stalk. In M. piperita var, single non-glandular trichomes and peltate trichomes were present on adaxial surface. Small capitate trichomes consisted of a globose unicellular head with a two- or three-celled uniseriate stalk. Peltate trichomes were distinctly present on abaxial surface, whereas they were not observed on adaxial surface. The trichomes were less dense in this species. Peltate trichomes consisted of a large eight-celled head, with an enlarged secretory cavity, attached to an one-celled short stalk.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.4
• /
• pp.319-326
• /
• 2013

The objective of this study is to help golfers to select adequate putters and to provide golfers basic scientific data for improving athletic performance by showing differences of kinematic variables according to the shape of putter head. In this research three right-handed male pro-golfer who are listed at KPGA were studied and three video camera (GR-HD1KR, JVC, Japan) were used and recording speed was 60 frame/sec during the research. In this study kinematic variables were calculated using Kwon3D XP program and analysed on the 4 events and 3 phases. This study showed the following results : (1) The swing of heel-toe putter showed longer time than that of face balanced putter, and there are statistical significant difference of kinematic variables of each objective (2) As of the trajectory of putter head, heel-toe putter showed more approximating curve trajectory than that of in-between, face balanced putter on the X-axis (3) heel-toe putter showed longer distance follow-through than that of other putters by statistically significant difference on the Y-axis (4) Heel-toe putter showed longer distance swing trajectory over the ground than that of other putters by statistically significant difference on the Z-axis.

• Geotechnical Engineering
• /
• v.3 no.3
• /
• pp.21-30
• /
• 1987

Some methods are presented to estimate the ultimate lateral resistance of single active piles subjected to lateral loads above the ground surface, considering the lateral soil reaction, the pile length and the fixity condition of a pile head. The lateral soil reaction acting on a single active pile embedded in soil due to pile movement can be estimated by use of a theoretical equation which is derived by considering especially the plastic state of ground surrounding the pile and the pile- section shape. The piles are named short or long depending upon the relative magnitude of the induced bending moment to the yielding moment. As for the fixity condition of a pile head, the free head and the unrotated head are considered. Comparison with other experimental results gives that the calculated ultimate lateral resistance obtained by the author's theory is closer to experimental results than the one obtained by Brom's theory.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.717-724
• /
• 2010

The initial trajectory of a spheroid configuration bobbin for precision guidance has been investigated by analyzing its aerodynamic load and six-degree-of-freedom motion. The effects of changes in the spheroidal head configuration, flow angle and lateral center-of-gravity offset are numerically studied using the commercial software "FLUENT". A wind tunnel test is also conducted to validate the numerical scheme and to examine effect of the Reynolds number on the flow around the bobbin. It is shown that the size of the separation bubble formed on the surface decreases significantly when the Reynolds number is varied between 110,000 and 140,000. At a zero flow angle, an oblate spheroidal head shows relatively moderate rotation while a prolate spheroidal head shows rapid rotation. The bobbin with a spherical head shape has little effect on the flow direction; however, the oblate bobbin is sensitive to the flow angle. The roll motion of the bobbin is greatly influenced by the lateral center-of-gravity offset and maximum dispersion is observed at half of the radius.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.5
• /
• pp.311-317
• /
• 2011

The blind spot is an area where drivers visibility does not reach. When drivers change a lane to adjacent lane, they need to give an attention because of the blind spot. If drivers try to change lane without notice of vehicle approaching in the blind spot, it causes a reason to have a car accident. This paper proposes a night-time blind spot vehicle detection using cameras. At nighttime, head-lights are used as characteristics to detect vehicles. Candidates of headlight are selected by high luminance feature and then shape filter and kalman filter are employed to remove other noisy blobs having similar luminance to head-lights. In addition, vehicle position is estimated from detected head-light, using virtual center line represented by approximated the first order linear equation. Experiments show that proposed method has relatively high detection porformance in clear weather independent to the road types, but has not sufficient performance in rainy weather because of various ground reflectors.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1681-1688
• /
• 2019

In accordance with ASME Boiler and Pressure Vessel (B&PV) Code Sec.XI Appendix. G, a postulated crack is located at the beltline of a reactor pressure vessel because the neutron flux at the beltline is higher than elsewhere. This means that the distance between the core and the semi-spherical bottom head is longer than the distance between the core and the cylindrical beltline. However, several Small and Medium sized Reactors have bottom heads with diverse shapes, including dished or semi-elliptical shapes, to satisfy the requirement and performance. So, the aim of this paper is to evaluate the effect of crack location on Pressure-Temperature limit curve. To do this, two types of postulated crack location, such as beltline and semi-elliptical bottom head, were adopted to derive the Pressure-Temperature limit curve. Also, parametric studies for neutron flux, crack shape and so on were performed. As a result, core critical temperature of semi-elliptical bottom head is found to higher than that of beltline even when they have same values of thickness and neutron flux. This result will be useful to enhance the understanding of Pressure-Temperature limit curve.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.455-460
• /
• 2012

The Electrostatic Inkjet system has many applications in cost and time effective manufacturing of printed electronics like RFIDs, OLEDs and flexible displays etc. This paper presents pneumatic ink supply system for an electrohydrodynamic deposition (EHD) setup for the precise pressure control to produce a small amount of discharge at the end of the capillary. The meniscus shape depends upon the applied pneumatic pressure to the ink supply system. Furthermore, this paper also compares meniscus shapes at different applied pneumatic pressures. It is concluded that patterning of constant line-width can be achieved better by controlling the meniscus shape using this technique.

• Korean Journal of Human Ecology
• /
• v.15 no.4
• /
• pp.573-583
• /
• 2006

Hair styles for human being develope according to the natural environment. Chinese hair styles have been changed from tousled hair to pigtailed hair, later additional style of shaved hair, became pigtailed. Each hair style for people, however, is based on each people's culture and history. Thus, the same changed had not been applied to each culture simultaneously. Hairstyle for Yao(遼) Jin(金) Yuan(元) that is a representation of ancient northern tribe, is summarized as follow; Tung Hu'(東胡)s inferior, Khitai(契丹)'s hair style is tousled hair and Sushen(肅愼),'s inferior, Jurchen(女眞) has partial shave and left 2 strand of pigtail. Hun'(匈奴)s inferior, Mongol(蒙古) has hair in top and shaved head except both sides and rear. One style is circular shape of braided hair at both sides. The other is one strand pigtail at the rear head, which is the original shape for Man'(滿) pigtail later.