• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1390-1393
• /
• 2004

In the present industry, three-dimensional colored shape has required for realistic prototype in rapid manufacturing. Z-corporation developed 3D printer which can color three-dimensional prototype but this process can't be adopted to other rapid prototype products and spend much time and cost coloring 3D shape. In this study a new coloring process on three-dimensional surface is proposed for realistic prototype. Three-dimensional surface coloring apparatus is composed of HP ink jet head and X-Y plotter. Distance and angle between ink jet nozzle and 3D surface are set as process parameter. Based on the experiment of process parameters, it is shown that distance and angle affected on printed image on 3D surface. Circle and line shape are chosen as standard image shape because the shape has widely used as standard in 2D printing. Consequently, the distorted image on 3D surface is corrected by transformed input image data.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1570-1575
• /
• 2007

The cold-forging process analysed in this paper deals with the cam bolt of a nonaxisymmetric shape which mainly is used as a part in the steering system of a vehicle for the purpose of adjusting shock absorb. So both strength and endurance are very important for the cam bolt. In this study, cam bolt forging process is composed of four stage processes. For three forging stages, shape of workpiece will be eccentrical. And then bolt head and washer of eccentrical shape is created in last stage. 3D finite element analysis repeatedly has been performed with changing dimension of die to obtain adequate former multi forging process and die shape. Simulation results reviewed have influence on deciding design of die and forging process. As a result, Simulation results have provided a direction to improve the process.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권5호
• /
• pp.75-82
• /
• 2015

본 연구는 고강도 철근을 확대머리 이형철근으로 사용하는 경우 정착길이 효과에 관한 실험 연구이다. 현행 기준에서는 확대머리 이형철근의 정착길이를 산정하는 식에서 철근의 설계기준강도를 400 MPa로 한정하고 있다. 고강도 철근에 대한 연구결과가 충분하지 않기 때문에 이러한 규정이 명시된 것이다. 따라서 본 연구에서는 설계기준 항목강도 600 MPa의 철근으로 확대머리 이형철근을 제작하여, 변수별 실험연구를 수행하였다. 실험은 철근의 정착길이, 철근의 개수, 그리고 확대머리의 형상 등의 변수로 계획하였다. 실험체는 정착길이가 긴 L형과 정착길이가 짧은 S형으로 분류하고, 확대머리의 형상은 원판형(A형)과 원뿔형(B형)으로 구분하였다. L형 실험체는 원판형 확대머리를 대상으로 철근 개수가 1~3으로 변하는 3개의 실험체와 S형 실험체는 원판과 원뿔형 확대머리 형상에 대하여 정착길이를 L형의 50%, 45%, 40%, 35%로 변화한 실험체를 계획하였다. L형(LA형) 3개, SA형 4개, SB형 4개 등 총 11개의 실험체를 인발실험을 하였다. 실험결과는 콘크리트구조기준(부록 II)의 정착길이 산정 규정에 따라 평가하였으며, 그 결과 항복강도 600 MPa의 철근을 사용한 확대머리 이형철근은 현행기준의 설계식을 적용하여 설계할 수 있음을 보였다.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.925-933
• /
• 2009

This research was carried out by analyzing a form and composition in baseball cap targeting 97 marketing products, and we have typified it by frequency analysis. We have carried out comparing and wearing test between comparative pattern and the most preferred three products of sports brand, fashion brand A, and fashion brand B (flex fit). And also, in order to provide basic indices for developing new pattern, we have carried out analysis of variance. 1. As a result of analyzing a form in baseball cap, the most general pattern type for crown is central cutting with six pieces. In a cap, a basic type with no decoration was the most general. In the size adjustment and decoration, belt type and embroidery type (front or side embroidery of the crown) was the most common, respectively. 2. As a result of comparing and analyzing six-piece typed crown pattern, the comparative pattern was the same and symmetric in size and form of three patterns in front, side, and back. However, the patterns of marketing products of three brands were different in size and form of three patterns in front, side, and back. The patterns of sports brand were the largest in crown height and width, thus it was good at providing activity and motion. The patterns of fashion brand A were the shortest in the crown length and well-curved in front pattern, so it was well-matched with head shape. The patterns of fashion brand B were well-described back side of head since its convex and long patterns in the back head. 3. As a result of wearing test by five-point Likert scale among brand, pattern of fashion brand B outperformed the others since it was well-matched with head shape. In the cap, pattern of fashion brand A is the most preferred which was 7.5 cm of length and 18cm of width.

• 한국의상디자인학회지
• /
• 제12권2호
• /
• pp.1-20
• /
• 2010

This thesis is about "manggon" that holds down man's top knot hair and its accessaries "pungjam", "kwanja". manggon was seen first time in the mural of Donwhang kae won chon bo during T'ang period (713-756). The "Tu Aek Ra" manggon shown in this mural would be the origin and beginning of maggon's usage. Also the "Sha" that was placed on top of the hair for decoration purpose is believed to be a former form of "manggon" Before the short hair cut was enforced, wearing the "kwan"(head gear) was considered as an impotant etiguette. Thus the head gear was treasured and the manggon which was the most essential piece to cover down the hair before to put on the head gear was regarded as the most important piece. However, since the manggon was tied very tightly around the forehead, manggon caused some sickness. From my private collections of man's head gears and ornament, 121 items were selected and used for analysis and the followings were found: 1. Pungjam was divided into 8 categories according to its shape and a research was made on its unique structural characteristic on each categories. 2. Kwanja's material and design that were used are all in accordance to the historical recordings.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권2호
• /
• pp.121-127
• /
• 2008

This paper presents design and fabrication of optimized geometry structure of electrostatic inkjet head. In order to verify effect of geometry shape, we simulate electric field intensity according to the head structure. The electric field strength increases linearly with increasing height of the micro nozzle. As the nozzle diameter decreases, the electric field along the periphery of the meniscus can be more concentrated. We design and fabricate the electrostatic inkjet heads, hole type and pole type, with optimized structure. It was fabricated using thick-thermal oxidation and silicon micromachining technique such as the deep reactive ion etching (DRIE) and chemical wet etching process. It is verified experimentally that the use of the MEMS inkjet head allows a stable and sustainable micro-dripping mode of droplet ejection. A stable micro dripping mode of ejection is observed under the voltages 2.5 kV and droplet diameter is $10\;{\mu}m$.

• Clinics in Shoulder and Elbow
• /
• 제20권1호
• /
• pp.46-48
• /
• 2017

There are many methods of making cement spacer in patients who require a two-staged operation for humeral head osteomyelitis. However, limitation of motion after the first surgery-due to inadequate size and insufficient intra-articular space for second surgery-remain to be an issue. To mitigate this issue, we made a cement spacer with the same size and shape of the patient humeral head. Four patients with humeral head osteomyelitis were enrolled in this study. To make the cement spacer, we used the Mimics program, and designed the molding box by a reverse engineering technique. We evaluated the range of motion and pain using a Constant score. The mean abduction was $50^{\circ}$($40^{\circ}-60^{\circ}$), forward flexion was $50^{\circ}$ ($30^{\circ}-70^{\circ}$), and average Constant score was 47.75 (44-52). Three-dimensional printed molding technique is one of the effective methods for humeral head osteomyelitis allowing for daily activities prior to the second surgery.

• 수산해양기술연구
• /
• 제16권1호
• /
• pp.23-26
• /
• 1980

The pure polypropylen rope has been used for the head rope, and the lead cored polypropylen rope for the ground rope in the anchovy boat seine. These ropes revealed the disadvantage that deforms the net shape due to their elongation. Te improve the disadvantage, authors developed the rope of new construction which is cored by wires and wrapped by polypropylene fibers, 20mm in diameter for the head rope and 40tnm for the ground rope. To compare the physical properties of the improved rope with the conventional ones, some factors are valued and the following results are found. 1. The improved ropes rev~al some disadvantages, such as the head rope is heavier, the ground rope lighter, and both of them are stiffer than the conventional ones, contrary to the required condition of ropes) However no special difficulties are found in practical use. 2. The improved ropes display much advantages, such as elongation is 30 percent less, breaking strength is 35 precent greater, and elastic recovery is 10 percent greater than the conventional ones. Thus, it is considered that the improved ropes are more suitable for the head rope and the ground rope of the anchouy boat seine net than the conventional ones.

• 복식
• /
• 제60권4호
• /
• pp.58-75
• /
• 2010

The purpose of this study is to investigate the characteristics of fur and leather clothes of minority races of China in Northeas and Inner Mongolia. To examine their characteristics, the clothes and ornaments were classified into four types: headwear, clothes, footwear, and accessories. First, headwear was divided into animal head-shaped, petal-shaped, round-shaped, and cone-shaped head wear. Among them, the animal head-shaped headwear was made by making the best use of the shape of animal's head and it was used as the best disguising method when hunting. Second, clothes were composed of upper garments and lower garments. For the upper garments, Po and Jeogori were worn and pants were worn for the lower garments. The clothes were decorated with lining, applique, or top-stitching on the outer collar, neck circumference, and the edge of sleeves and pants. Third, for the footwear, high boots of leather were developed to meet the needs for a convenient life in the plains. In some areas, fur shoes and leather shoes were also used. Finally, accessories included bags and gloves. Bags were usually decorated with fur on the outside or with a fringe or applique of tanned leather. Gloves were lavishly decorated with embroideries and partly with fur or leather.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.641-644
• /
• 2005

This study reveals some recent attempt in modeling empirically obtained B&K HATS (Head and Torso Simulator) HRTFs (Head Related Transfer Functions) to Isolate parameters that stimulate lateral and elevation perception. Localization using non-individual HRTFs often yields poor performance in synthesizing virtual sound sources when applied to a group of individuals due to differences in size and shape of head, pinnae, and torso. For realization of both effective and efficient virtual audio it is necessary to develop a method to tailor a given set of non-individual HRTFs to fit each listener without measuring his/her HRTF set. Pole-zero modeling is applied to fit HRIRs (Head Related Impulse Responses) and modeling criterions for determining suitable number of parameters are suggested for efficient modeling. Horizontal HRTFs are modeled as minimum-phase transfer functions with appropriate ITDs (Interaural Time Delay) obtained from RTF (Ray Tracing Formula) to better fit the size of listener's head for usage in simple virtualizer algorithms without complex regularization processes. Result of modeling HRTFs in the median plane is shown and parameters responsible for elevation perception are isolated which can be referred to in the future study of developing customizable HRTFs.