• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1836-1839
• /
• 2003

This paper describes the surface polishing characteristics of a flat and free surface ferromagnetic substance(SM45C) that magnetic abrasive polishing processed. The effects of the various working factors on the surface roughness are clarified by experiments respectively, such as magnetic flux density. rotation speed of magnetic head. working gap, feed rate of workpiece. diameter of magnetic abrasives. and shape of workpiece. On the basis of these experiments, the polishing mechanism is discussed and the characteristics of the polishing process are described. In addition, it is found experimentally that die ＆ mold surfaces are also polished precisely by this process

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.500-504
• /
• 2004

The bio-micro pin has been usually used for the biochemistry analysis. The manufacturing capability of the micro-pin and the their array with the effective and low-cost way is very important and it gives great economical benefits to developers. The micro-pin is composed of the sample channel for holding the liquid with the fixed volume, the flat tip which determines the printing quality and the pin head for preventing the rotation of the pin in the holder. In this study, we have manufactured newly designed micro-pins by the wire-EDM process with special jigs, and analyzed liquid holding and printing characteristics with respect to the variation of the shape and the tip size of the micro-pin.

• Journal of Korean Academy of Nursing
• /
• v.16 no.3
• /
• pp.31-37
• /
• 1986

The purpose of this study is to develop a ratio scale measuring organizational charateristics in nursing. 599 staff nurses working at 10 educational hospitals in Seoul were participated during the period from July 1 to July 31, 1985. Subjects were instructed to rate at one to five points likert type scale according to the level of positive characteristics affecting the nursing organizational effectiveness. As a result of factor analysis given to 50 items with varimax rotation and rearrangement on the asis of factor loading 0.3, there are 4 factors consisted of 33 items presented: factor 1 : leadership of head nurses and interaction(11 items) factor 2 : leadership of supervisors and top managers(11 items) factor 3 : interaction with supervisors(5 items) factor 4 : organizational climate(6 items) Reliability of the factors were tested by Cronbach's Alpha, and the result was α=0.67∼0.84 Further studies are needed to identify the relationship between this tool and the effectiveness of various organization in nursing.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.839-842
• /
• 2005

본 논문은 스테레오 카메라를 통해 얻은 변이 정보를 이용하여, 3 차원으로 머리의 회전 각도를 추정하는 방법을 제안한다. 머리 회전에 의한 주시 방향은 사람이 관심을 가지는 방향이므로 이동을 추정하는 것에 비해 많은 중요성을 갖는다. 본 논문에서는 얼굴 영역 내의 여러 특징점들 중 3 개의 특징점들을 포함하는 여러 평면(Plane)이 머리가 이동하더라도, 그 평면들 사이의 각은 변하지 않으므로, 회전 각도 추정에 영향을 주지 않는 점을 이용하여 회전 각도를 추정하였다. 또한, 기존 논문이 카메라 보정을 통해 3 차원 위치를 측정하지만, 제안하는 방법은 변이 공간에서 회전 각도를 추정하기 때문에 카메라 보정 과정이 필요하지 않다. 변이 정보를 얻기 위한 스테레오 장비는 평행 카메라 모델로 가정하며, 얼굴 내의 특징점은 KLT(Kanade-Lucas-Tomasi) 특징 추적 알고리즘을 이용하였다. 실험결과는 기준 영상에 대하여 추정된 3 차원 각도를 나타낸다.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.21-27
• /
• 2003

The bio-micro pin is usually used for biochemistry analysis. The capability of manufacturing the micro-pin and array with effective and low-cost way is very important to developers. The micro-pin is composed of "sample channel" putting liquid into already fixed volume, "flat tip" having connection with printing quantity, and "head part" for preventing it from rotation of pin in the holder. We analyzed out printing variation in accordance with shape and tip size of the micro-pin point channel, In this study, we suggested the manufacturing progress and shape demand condition of the micro-pin which could put $0.2{\mu}{\ell}$-biochemistry material into the sample volume, and will be able to produce the micro-pin which can put $10n{\ell}$-biochemistry material into the sample volume in the future.

• The korean journal of orthodontics
• /
• v.19 no.3
• /
• pp.147-160
• /
• 1989

Long face patients are characterized by excessive anterior facial height, lip incompetence at rest, anterior open bite, and gummy smile. A major problem is an inferior rotation of the posterior maxilla and upper molars. Long face patients have been the most difficult for orthodontist to treat successfully. In growing patients, the methods for impeding excessive vertical growth have been used high pull head gear, functional appliance, and combined type of two. One significant improvement comes from using a full arch splint to deliver force to the maxilla more vertically. In adult patients, orthodontic camouflage treatment is biomechanically difficult and doesn't work when the problem is primarilly vertical. Surgical maxillary impaction provides a means for successfully treating most of problems. Also, superior reposition of the chin via a mandibular inferior border osteotomy is effective in decrease of lower anterior facial height and correction of the poor chin-lip balance. Post-surgical stability and the physiologic response are good. The coordinated orthodontic and surgical treatment is necessary for solution the difficult skeletal deformity.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.240-244
• /
• 2004

Characteristics of steady and unsteady cavitation in a turbopump inducer were investigated in this paper. To see the effect of tip clearance on the inducer performance, three cases of tip clearance were tested. The helical inducer, which has two blades with inlet tip blade angle of 7.8 degree and tip solidity of 2.7, was tested in the water. In the non-cavitating condition, the inducer head decreased with increase in the tip clearance. Rotating cavitation and cavitation surge were observed through unsteady pressure measurements at the inducer inlet. The cell number and propagation speed of the rotating cavitation were determined through cross-correlation analysis. During the rotating cavitation one cell rotated at the same rotational speed as that of the inducer rotation and the cavitation surge did not rotate. The critical cavitation number increased with increase in the tip clearance at the same flow rate, but the change of critical cavitation number was small at the nominal flow rate.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.377-380
• /
• 2001

The vestibular system located in the inner ear controls reflex body posture and movement. It has the semicircular canals sensing an angular acceleration and the otolith organs sensing a linear acceleration. With this organic signal, medical doctor decide if a person has disease or not. To obtain this data, a precision stimular system is considered. Robust control is needed to obtain eye signals induced by off-vertical axis rotation because of an unbalanced load produced by tilting the axis of the system upto 30 degrees. In this study, off-vertical axis rotatory system with visual stimulation system are developed. This system is consisted of head mounted display for generating horizontal, vertical, and three dimensional stimulus patterns. Furthermore wireless recording system using RF modem is considered for noiseless data transmission.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.814-821
• /
• 2011

The purpose of this study was to evaluate of resolution parameter and reconstitution filter in the 256 multi detector computed tomography(MDCT) by using the head phantom. We used 256 MDCT, and head phantom of philips system. We evaluated to image quality by using Extended Brilliance Workspace. The protocol were axial scan method with 120 kVp, 0.5 sec of rotation time, 5 mm of slice thickness and increment, 250 mm of field of view(FOV), $512{\times}512$ of matrix size, 1.0 of pitch, $128{\times}0.625$ mm of collimations. The resolution parameter was applied for 'Standard', 'High' and 'Ultrahigh'. The reconstitution filters were changed to seven type of 'A', 'B', 'C', 'D', 'UA', 'UB', 'UC'. The assesment factors of image quality were the uniformity, the noise, the linearity and 50% and 10% of the modulation transfer function(MTF). Finally The good image quality in 'High' resolution parameter showed at the uniformity, the linearity and 50% and 10% of MTF. The 'UA', 'UB' reconstitution filter showed at the good image quality of the uniformity and the noise and 'C' reconstitution filter showed at the same result of the linearity and 50% and 10% of MTF.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.13.1-13.8
• /
• 2018

Background: We evaluated change in the mandibular condyle after orthognathic surgery using cone-beam computed tomography (CBCT) in patients with facial asymmetry. Methods: Thirty patients with skeletal class III malocclusion and mandibular prognathism or facial asymmetry were classified into two groups according to the amount of menton deviation (MD) from the facial midline on anteroposterior (AP) cephalogram: group A (asymmetry, MD ≥ 4 mm; n = 15) and group B (symmetry, MD < 4 mm; n = 15). Position and angle of condylar heads on the axial, sagittal, and coronal views were measured within 1 month preoperatively (T0) and postoperatively (T1) and 6 months (T2) postoperatively. Results: On axial view, both groups showed inward rotation of condylar heads at T1, but at T2, the change was gradually removed and the condylar head returned to its original position. At T1, both groups showed no AP condylar head changes on sagittal view, although downward movement of the condylar heads occurred. Then, at T2, the condylar heads tended to return to their original position. The change in distance between the two condylar heads showed that they had moved outward in both groups, causing an increase in the width between the two heads postoperatively. Analysis of all three-dimensional changes of the condylar head positions demonstrated statistically significant changes in the three different CBCT views in group B and no statistically significant changes in group A. Conclusions: There was no significant difference between the two groups in condylar head position. Because sagittal split ramus osteotomy can be performed without significant change in symmetrical and asymmetrical cases, it can be regarded as an effective method to stabilize the condylar head position in patients with skeletal class III malocclusion and mandibular prognathism or facial asymmetry.