• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2012

In this study, we constructed a virtual auditory display(VAD) that enables listener to move in a room freely. The VAD system was installed in a soundproof room($4.7m(W){\times}2.8m(D){\times}3.0m(H)$). The system consisted of a personal computer, a sound presentation device, and a three-dimensional ultrasound sensor system. This system acquires listener's location and position from a three-dimension ultrasonic sensor system covering the entire room. Localization was realized by convolving the sound source with head related transfer functions(HRTFs) on personal computer(PC). The calculated result is generated through a LADOMi(Localization Auditory Display with Opened ear-canal for Mixed Reality). The HRTFs used in the experiment were measured for each listener with loudspeakers constantly 1.5m away from the center of the listener' s head in an anechoic room. To evaluate the system performance, we experimented a search task of a sound source position in the condition that the listener is able to move all around the room freely. As a result, the positioning error of presented sound source was within 30cm in average for all listeners.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.311-322
• /
• 2009

Using the 3-D analysis, this study winpared and analyzed the 'fade-shot swing' which is one of the golf technique. The subjects of this study were 3 male pro golfers they experimented with only a 7 iron. The purpose was to enhance their performance by producing the important kinematical parameters, finding out the features in them and providing the data to a coach and players. As a result, the position of the club head showed from the outside orbit to the inside orbit. When position of the center of mass moved backwards, the probability of the failure of the fade-shot increased. Cocking angle had an effect on easing the wrist for a smooth follow-through after the impact. It showed that the changes in the shoulder movement was made first and followed by the waist. The hip joint angular velocity achieved a smooth fade-shot motion due to the hitting delay also the velocity of the club-head was faster when uncocking was released at the time of impact.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.77-84
• /
• 2013

Most research on the inkjet printing technology has focused on the development of inkjet head itself, and of process, not on the landing accuracy of the droplets to a target. Thus, this paper presents the modeling and experimental verification on the static landing accuracy and precision of the droplets from the magnetostrictive inkjet head. A simple model based on the angle deviation of a nozzle tip and on a distance to a substrate is considered, assuming that there is no ambient effect. The angle deviation of the nozzle tip is determined by using its digital image with the aid of a pixel calculation program, and the distance to the substrate is set to 1 mm. Three experiments have planned and preformed. The first experiment is to collect the initial data for the landing distribution of the droplets. The second experiment is to collect the repeatability data of the stage used. Then, these data are used to rederive the equation for the final landing position of the droplet. The final experiment is to verify the equation and to show the calibration results. The respective landing accuracy of the droplet after calibration on the x-axis and on y axis has improved from $338.51{\mu}m$ and $-133.63{\mu}m$ to $7.06{\mu}m$ and $13.11{\mu}m$. The respective percent improvement on the x-axis and on y axis reaches about 98 and about 90. The respective landing precision of the droplet after calibration on the x-axis and on y axis has improved from ${\pm}182.6{\mu}m$ and ${\pm}182.88{\mu}m$ to ${\pm}24.64{\mu}m$ and ${\pm}42.76{\mu}m$. The respective percent improvement on the x-axis and on y axis reaches about 87 and about 77.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3301-3306
• /
• 2012

In LED chip packaging, die bonding is a very important process which fixes the LED chip on the lead frame to provide enough strength for the next process. Conventional pick-up device of the die bonder is simply operated by up and down motion of a collet and an ejector pin. However, this method may cause undesired problems such as position misalignment and/or severe die damage when the pick-up device reaches the die. In this study, to minimize the position alignment error and die damage, a die bonder is developed by adopting a new pick-up head for precise alignment and high speed feeding. To evaluate structural stability of the designed system, required finite element model of the die bonder is generated, and structural analysis is performed. Vibration analysis of the pick-up head is also performed using developed finite element model at operation frequency range. As a result of the analysis, deformation, stress, and natural frequency of the die bonder are investigated.

• Journal of International Academy of Physical Therapy Research
• /
• v.10 no.4
• /
• pp.1897-1902
• /
• 2019

Background: Tension-type headaches, which make up the highest proportion of headaches, are prone to develop into chronic tension-type headaches (CTTH). The characteristic of CTTH in patients is that the active myofascial trigger point (ATrP) which causes pain in the muscles of the back of the head is increased, compared to the normal headache and moves the head position forward. Objective: The aim of this study was to investigate the effects of myofascial release (MFR) and posture correction in effectively improving neck function and sleep quality in the symptoms of CTTH patients. Design: Observer-blind study Methods: To reduce ATrP, MFR was applied and exercise was also applied to correct posture. The subjects of this study were 48 individuals randomly divided into three groups; The MFR group using the MFR technique; The MFR with exercise group subject to both the MFR technique and forward head position correction exercises (MFREx), and the control group. MFR and MFREx groups were given the relevant interventions twice a week for four consecutive weeks, and went through the number ATrPs, range of motion (ROM) of neck, Neck Disability Index (NDI) and the Pittsburgh Sleep Quality Index (PSQI) before and after the intervention. A physical therapist, who was fully familiar with the measuring methods of the equipment, was the measurer and not aware of the target's condition was blinded to take measurements only before and after intervention. Results: There was a significant improvement in the ATrP, Neck ROM, NDI and PSQI in the group of patients to whom the MFR technique and MFREx were applied. MFREx was more effective in increasing neck mobility. Conclusions: According to this study, the application of MFR is effective in improving neck movement and sleep quality in chronic tension headache patients.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.208-215
• /
• 2019

The purpose of this study was to investigate the effects of deep neck flexion exercise(DNFE) and thoracic range of motion exerecise(TROM) on the pain and forward head position(FHP) in stroke patients. Thirty-six patients were randomly assigned to DNFE group, TROM group, and control group. pre and post intervention, pain(VAS), Craniovertebral angle(CVA), cranial rotation angle(CRA), FHP, and TROM were measured. As a result. The DNFE group and the TROM group showed significant differences in VAS, CVA, CRA, FHP, and TROM pre and post intervention(p <.05), and the two groups showed VAS, CVA, CRA, FHP, and TROM compared to the control group (p <.05). In conclusion, in patients with stroke, DNFE and TROM were effective in restoring FHP and neck pain. We hope that they will be used in the interventional program for stroke patients in clinical practice.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.557-565
• /
• 2018

For GNSS navigation in urban environment, a novel short delay multipath mitigation algorithm is proposed in this paper. This algorithm detects which satellite's signal is the multipath signal by using the constraint that GNSS receiver is equipped in a ground vehicle, then estimate new position after separating the measurement of that satellite. A criterion for detecting and validating the multipath signal depends on the performance grade of the GNSS receiver and the dynamics of the vehicle. In order to evaluate the proposed algorithm, the real data had been collected at the multipath environment of 4 scenarios. By post-processing the real data with both of the multipath mitigation algorithm in the receiver and the proposed algorithm, it can be checked that the position errors were less than 5 meters except the case that the number of visible satellite is lower than 5.

• Physical Therapy Korea
• /
• v.28 no.1
• /
• pp.36-46
• /
• 2021

Background: It is reported that the proprioceptive sensation of patients with neck pain is reduced, and neck sensory-motor control training using visual feedback is reported to be effective. Objects: The purpose of this study is to investigate how sensorimotor control training for the cervical spine affects pain, function, and psychosocial status in patients with chronic cervical pain. Methods: The subjects consisted of 36 adults (male: 15, female: 21) who had experienced cervical spine pain for more than 6 weeks. An exercise program composed of cervical stabilization exercise (10 minutes), electrotherapy (10 minutes), manual therapy (10 minutes), and cervical sensorimotor control training (10 minutes) was implemented for both the experimental and the control groups. The cervical range of motion (CROM) and head repositioning accuracy were assessed using a CROM device. In the experimental group, the subjects wore a laser device on the head to provide visual feedback while following pictures in front of their eyes; whereas, in the control group, the subjects had the same training of following pictures without the laser device. Results: There were no statistically significant differences between the two groups in pain, dysfunction, range of motion, or psychosocial status; however, post-test results showed significant decreases after 2 weeks and 4 weeks compared to baseline (p < 0.01), and after 4 weeks compared to after 2 weeks (p < 0.01). The cervical joint position sense differed significantly between the two groups (p < 0.05). Conclusion: In this study, visual feedback enhanced proprioception in the cervical spine, resulting in improved cervical joint position sense. On the other hand, there were no significant effects on pain, dysfunction, range of motion, or psychosocial status.

• The Journal of Korean Physical Therapy
• /
• v.35 no.4
• /
• pp.117-123
• /
• 2023

Purpose: In this study, subjects with femoral anterior glide type were examined to investigate the effects of femoral head anterior glide fixation during active straight leg raise on the strength of the hip flexor in a supine position. Methods: Fifteen subjects participated in this study. All subjects were classified through an evaluation form for femoral anterior glide type (FAGT). The strength of the hip flexor was measured during active straight leg raise test (ASLR test), and compared with and without femoral anterior glide fixation in a supine position. The fixation of the femoral head was achieved as per the therapist's manual guidelines. Paired t-test was applied to compare changes in the strength of the hip flexor according to fixation conditions. The level of statistical significance was set at α=0.05. Results: The strength of the hip flexor was lesser during the ASLR test with fixation compared to without fixation (p=0.007). Conclusion: The strength of the hip flexor decreases with fixation. Results of this study revealed a difference between hip flexor strength, with and without femoral anterior glide fixation during ASLR, in subjects with femoral anterior glide type.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.29 no.2
• /
• pp.59-67
• /
• 2023

Background: The purpose of this study is to analyze the effect of shoulder and neck stabilization exercise using a gym ball for healthy women in their 20s with round shoulder and forward head posture, it is intended to try and find improvement for posture. Methods: The subjects of the study were 25 women who understood the purpose of the research and voluntarily agreed to participate in the experiment. They carried out the shoulder and neck stabilization exercise program using a gym ball, which was conducted for 35 minutes, 3 times a week for 4 weeks. The position of the round shoulder and shoulder bones was measured using an tape measurement and were recorded in both at pre, 2 weeks, and post intervention. The craniovertebral angle (CVA) and craniorotational angle (CRA) was measured using an image J. Results: The round shoulder posture left was statistically significantly different within group (p<.05); however, the round shoulder posture right wasn't statistically significantly different (p>.05). As a result of this contrast, test were significant different in both at pre, 2 weeks and post. The scapular position on the left and right were statistically significantly different within the group (p<.05). As a result of the contrast, test were significant different in both at pre, 2 weeks and post (p<.05). The CVA and CRA on the left and right were statistically significantly different within the group (p<.05). As a result of the contrast, test were significant different in both at pre, 2 weeks and post (p<.05). Conclusion: The gym ball exercises improved the posture of women in their 20s. Therefore, gym ball exercises can help improve the quality of life of those with shoulder and neck pain.