• 농약과학회지
• /
• 제18권4호
• /
• pp.330-335
• /
• 2014

본 연구는 chlorantraniliprole과 ethaboxam 성분에 대해 결구 배추 속과 겉잎 중 잔류수준을 비교하고 겉잎의 수세, 데치기 및 가열조리에 의한 농약 잔류량의 변화를 알아보기 위해 수행하였다. Chlorantraniliprole은 3회 살포(수확 전 30일)한 배추 속과 겉잎(포기의 바깥 4장)에서 각각 <0.01 mg/kg, 0.076 mg/kg으로, 4회 살포(수확 전 10일)한 배추 속과 겉잎에서 각각 <0.01 mg/kg, 1.2 mg/kg 수준으로 잔류하였다. Ethaboxam은 3회 살포(수확 전 30일)한 배추 속과 겉잎에서 각각 <0.05 mg/kg, 0.22 mg/kg으로, 4회 살포(수확 전 10일)한 배추 속과 겉잎에서 각각 <0.05 mg/kg, 1.2 mg/kg 수준으로 잔류하였다. 실험한 두 성분은 배추 속에서는 검출되지 않지만 겉잎에 10-100배 높은 수준으로 잔류하는 것으로 나타났다. 그러므로 배추 속을 재료로 하는 배추김치는 농약에 대한 안전성에 대해 우려할 필요가 없을 것으로 판단된다. 또한 농약 잔류실험에서 배추 시료 수확시 겉잎의 제거정도에 대해 주의해야 될 것으로 생각된다. 한편 우거지에서는 두 성분의 잔류농도가 배추 겉잎의 10% 미만으로, 가열처리까지 하게 되면 5% 미만으로 낮아져 수세 및 데치기와 같은 우거지 제조과정에서 상당량의 농약이 제거되는 것을 알 수 있었다.

• 한국의류학회지
• /
• 제27권8호
• /
• pp.904-912
• /
• 2003

This study for‘Head Image’, which is affected by individual Image, is via fashion collection to analyze formative feature, fashion emotion and meaning structure of emotion and to inquire into correlation. I will offer fundamental data, which is can use Image making from the state of thing. First, to make charm and personal image, if we consider Head image well, it will very effective by the reason that personality and charm operate as important factors in fashion sensibility of Head Image. Second, we can know Head Image has more strong influence the part of emotion than fashion sensibility by showing that the sense of emotion is higher than this point of view of fashion sensibility in Head Image. Third, As a result of the correlation of fashion sensibility and emotion in Head Image, personal Head Image is effective to attract public gaze by causing negative emotion, and attractive Head Image is effective to give pleasant feeling by causing positive emotion. Forth, Avant-garde, Punk, Kitsch Image were estimated as the most personal things and Romantic, Ethnic Image were estimated as the most attractive things of the type of Head Image. Natural Image was estimated as the most feminine thing, and Elegant Image was estimated as the most mature thing. Fifth, when we look into the different appraisals between experts and amateurs about fashion sensibility and emotion of Head Image, a selection of experts are used to peculiar and strong Head Image, so amateurs respond it more sensitively and highly evaluate.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.435-439
• /
• 2002

In the pneumatic system, pneumatic cylinder is wildly used to factory automation. In general, Pneumatic cylinder problems are occured with colliding to stroke end part at which piston collide to end-cap, head cap and tube when piston is loading. This appearances have a short life of cylinder and is due to system destruction. This study examines the dynamic characteristics of pneumatic cushioning cylinder and cushion sleeve design. At head part cushion chamber for the vertical experimental, The decisions of cushioning effect and the results of the experimental research are obtained to the followings: i) The cushioning effects could acqure to the reserch, if the compressible energy is more than kinetic ones. ii) The collision of piston and head cover could acqure to the research, if the kinetic energy is more than compressible iii) If the load increase to the rolling car, the cushion region pressures would increase and the dynamic force.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2370-2372
• /
• 1998

Recently we have developed an active stereo head-eye system with vergence, name it KIST HECter(Head-Eye System with Colored Stero Vision), based on the analysis of human's neck and eye motion at visual behavior. Our HECter is a five degree-of-freedom system composed of pan and tilt motion in neck part and independent vergence motion of binocular cameras and commonly shared elevation axis in eye part. And stereo vision Provides two color image, which are processed by powerful each TMS32080 vision board. The shape and size are designed to be almost same as human face. The ability to vergence has significant importance and gives many beneficial merits. On its mechanical implementation we adapt a non-parallelogram 4-bar linkage mechanism since it provides high accuracy in transfering motion and enables compact and flexible design.

• International Journal of Computer Science & Network Security
• /
• 제23권1호
• /
• pp.11-16
• /
• 2023

Vehicular networks are part of the next generation wireless and smart Intelligent Transportation Systems (ITS). In the future, autonomous vehicles will be an integral part of ITS and will provide safe and reliable traveling features to the users. The reliability and security of data transmission in vehicular networks has been a challenging task. To manage data transmission in vehicular networks, road networks are divided into clusters and a cluster head is selected to handle the data. The selection of cluster heads is a challenge as vehicles are mobile and their connectivity is dynamically changing. In this paper, a novel secure cluster head selection algorithm is proposed for secure and reliable data sharing. The idea is to use the secrecy rate of each vehicle in the cluster and adaptively select the most secure vehicle as the cluster head. Simulation results show that the proposed scheme improves the reliability and security of the transmission significantly.

• 치과방사선
• /
• 제19권1호
• /
• pp.151-159
• /
• 1989

The author has studied radiographic bony cnages of mandibular condyle head in temporomandibular disorder patients using Oblique lateral transcranial projection, Orthopantomography, and Tomography. The bony change types and the frequencies of occurrence and the incidences of bony changes in three different radiographic techniques were examined. The coincidences of bony change types between the Oblique lateral transcranial projection and the lateral part of Tomogram, the Orthopantomogram and the medial part of Tomogram were also examined. The results were as follows: 1. The mean age of patients was 31.7 years and under 40 years were 24 patients, women werw 27 patients, men were 4patients. 2. The observable case of bony changes in all three radiographic techniques were 19 cases (50%) of 38 cases and the observable cases of bony changes in only Tomography were 5 cases(13.2%) 3. The most frequent radiographic bony change type was osteophyte and next orders were flattening, erosion, concavity. 4. The positional incidences of bony change in Tomogram were 31 cases in lateral part and 27 cases in central part. 5. The coincidence of bony change types between the Oblique lateral transcranial projection and the lateral part of Tomogram was 80%, and the coincidence between the Orthopantomogram and the medial part or Tomogram was 76.0%.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.210-215
• /
• 2003

A terminal pin, which is a part of high-voltage capacitors, has a head section of plate-shaped geometry with 0.8 thickness. The current manufacturing process, in which the head section is welded on the body part, has given wide deviations of part qualities such as geometrical accuracy, mechanical strength and electrical stability. In this paper, a cold forging process sequence was designed in order to produce the terminal pin as one piece. The plate-shaped head section requires an upsetting in the lateral direction of a cylindrical billet, which is followed by a blanking process. The deformed geometry of the upsetting, however, could not be predicted precisely by intuition since metal flows of an axial and a lateral direction of the cylindrical billet would occur simultaneously. Therefore, the geometry of the initial billet was determined by three dimensional finite element analysis in order to avoid defects in blanking process and intermediate forging processes were designed by applying design rules and two dimensional FE analysis. In addition, cold forging tryouts were conducted by using the die sets which were manufactured based on the designed process sequence.

• Smart Structures and Systems
• /
• 제9권2호
• /
• pp.165-188
• /
• 2012

In the first part of the paper, the optimal design parameters for tuned liquid column dampers (TLCD) in harmonic pitching motion were investigated. The configurations in design tables include uniform and non-uniform TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 for the design in different situations. A closed-form solution of the structural response was used for performing numerical optimization. The results from optimization indicate that the optimal structural response always occurs when the two resonant peaks along the frequency axis are equal. The optimal frequency tuning ratio, optimal head loss coefficient, the corresponding response and other useful quantities are constructed in design tables as a guideline for practitioners. As the value of the head loss coefficient is only available through experiments, in the second part of the paper, the prediction of head loss coefficients in the form of a design chart are proposed based on a series of large scale tests in pitching base motions, aiming to ease the predicament of lacking the information of head loss for those who wishes to make designs without going through experimentation. A large extent of TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 and orifice blocking ratios ranging from 0%, 20%, 40%, 60% to 80% were inspected by means of a closed-form solution under harmonic base motion for identification. For the convenience of practical use, the corresponding empirical formulas for predicting head loss coefficients of TLCDs in relation to the cross-sectional ratio and the orifice blocking ratio were also proposed. For supplemental information to horizontal base motion, the relation of head loss values versus blocking ratios and the corresponding empirical formulas were also presented in the end.

• 대한한의학원전학회지
• /
• 제34권3호
• /
• pp.73-83
• /
• 2021

Objectives : To organize the acupoints used to treat disorders of the head and face in the Zhenjiuzishengjing, and examine their characteristics in application. Methods : 1. The head and face area was divided into 8 parts according to the textbook of meridians and acupoints. Channels belonging to each part were marked. 2. Disorders as mentioned in the Zhenjiuzishengjing were categorized into 8 groups, accordingly. 3. Acupoints used to treat each disorder were organized according to the channels each belonged to. 4. The points were divided according to their proximity, and their application frequency was organized. 5. Based on the organized contents, the characteristics of using proximal and distal points, together with the interrelationship between the channel belonging to the afflicted area and the points locations were examined. Results : In treating disorders in the head and face area, various distal points along with proximal points were suggested in the Zhenjiuzishengjing. In some cases, points belonging to a channel that was irrelevant to the afflicted area were used widely; for proximal points, the Governor/Conception/Triple Energizer/Gallbladder channels were used. For distal points, channels that were related to the Five Zhang were used. Conclusions : Based on the contents of the Zhenjiuzishengjing, the following could be concluded: 1. When treating disorders of the head and face caused by heat, distal points were mostly used. 2. In cases where points which are not part of channels that pass the head or face were used, Zhang disfunction was likely behind such points selection.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1394-1399
• /
• 2007

Recently, Study of 3D freeform fabrication method was working in the various applications. For example, in the powder base, it's laminated using a binding method or laser sintering method. However, these methods are not suitable in the office environments because it dust with powder that is bad for health. In this paper, we introduce a method of 3D freeform fabrication using a curing of photo-polymer resin and construct a system has multi printing head. A photo-polymer curing method has simply fabrication process and high strength of manufacturing part. However, this method has a problem on the multi print-head system. Because multi-printing system has a other printing method compare with a single printing system. Therefore, we experiment a single head 3D printing and proposed a 3D printing method using a multi-piezo head.