• Journal of fish pathology
• /
• v.26 no.3
• /
• pp.129-137
• /
• 2013

The study surveyed infection rate of Kudoa septempunctata parasitized in the trunk muscle of olive flounder, Paralichthys olivaceus, cultured in Jeju Island and wild fish species caught in the coastal area around Jeju Island during 2012. Among 143 olive flounder that were randomly sampled from 26 different culture farms, K. septempunctata was detected in 7 fish samples (4.9%) from 4 different culture farms, showing no typical Kudoa infestation. However, K. septempunctata was not detected in olive flounder fry sampled from hatcheries and 8 species of wild fish. In addition, we compared 3 different sampling sites on trunk muscle of 7 Kudoa positive fish that included head part, tail part and entire muscle. Among 7 fish, K. septempunctata was detected in 3 fish that were sampled from head part; while 4 fish from tail part of trunk muscle. However, all 7 fish were positive when sampled from entire muscle. Thus, we suggest that it will be more efficient to use entire muscle sample than sampling partial muscle parts for detection of K. septempunctata.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.82-90
• /
• 2000

An experimental study has been carried out at circulating water channel to investigate the non-breaking and breaking waves generated by a submerged circular cylinder steadily moving under the free surface. Free surface profiles and pressure distributions on cylinder surface were measured at various submerged depths of cylinder. They were complemented by the measurements of velocities, head losses and turbulence intensities in the wakes of body and "breaker". Part 1 of this three-part paper describes the experimental arrangement and the patterns of wave profile and pressure distribution at various depths of submergence. These databank contributions are of special interest in traditional ship hydrodynamics. In Part 2, special focuses are made to elucidate the viscous and turbulent aspects of flow field. Finally Part 3 will deal with the visualization of instantaneous vortical flow to study the mutual interaction between vorticies shedded from the free-surface and the cylinder using a Particle Image Velocimetry.

• Journal of Fisheries and Marine Sciences Education
• /
• v.6 no.1
• /
• pp.11-19
• /
• 1994

The North Pacific midwater trawling which is one of the important fishing methods for Korean fishing industry is working in the Bering Sea and the sea near Kamchaka Peninsula. The catch by Korean midwater trawlers had been recorded about 300 thousands $^{M/_T}$ a year. Six types of midwater trawl net-ordinary midwater trawl net, super-V trawl net, super mesh trawl net, rope trawl net, super plus trawl net and kite trawl net-have been widely used by large trawlers above 1,500gt in size since 1982. Regarding the fishing efficiency, the super plus trawl net and kite trawl net were acknowledged as higher than other nets. Maximum mesh size of super-plus trawl net and kite trawl net ranges about 20m, whereas the length of net about 150m, and high-tech polyethylene is used as the material of rope part. The problems involved in the North Pacific midwater trawl net may be summarized as follows ; (1) The dimension of fishing gear is too big compared with the towing power of trawler. (2) The mesh size of the rope part is too big compared with that of the common netting part. (3) The net is often torn out in the connecting position of the rope part and the netting part. (4) The net is not matched with the trawler and the otter board in many trawlers, so the shape of the trawl gear in the water is instable. (5) The fish school located near head rope, ground rope and side rope in the net recorder is not caught in practice because of the net instability.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.131-138
• /
• 1999

The purpose of this study is to measure Korean, Chinese and Chosunjok college women's body part sizes, and then, classify their body shapes according to the drop value(hip circumference-chest circumference) as well as their statures, and thereupon, comparatively analyze the statistical distribution of their major body part measurements and thereby, provide for some basic data useful to the development of quality fitting apparels exportable to China. The results of this study can be summarized as follows; Most of Korean and Chinese college women were found to belong to the body type of "N" body shape, while many of Chosunjok college women belonged to "H" body shape body type characterized by normal stature but small difference between hip and chest circumferences. The most prevailing body type of Korean and Chinese college women next to "N" type(65%, 51%) was "H" (23%, 35%), followed by "A" type(12%, 14%), while that of Chosunjok college women was "H" type (54%), followed by "N" (40%) and "A" type (6%). On the other hand, in terms of distribution of major body part sizes, there was found a wide difference between Chinese and Korean college women. Chosunjok college women had similar body part sizes to Korean college women's in such measurements as waist back length, shoulder-to-shoulder length, front interscye length, back interscye length, under-chest circumference and weight, while having simliar body part sizes to Chinese college women's in such measures as stature, arm length, waist front length, waist side-hip line length, crotch length, head circumference, neck-root circumference and waist circumference.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.465-468
• /
• 2008

Clustering techniques in wireless sensor networks is developed to minimize the energy consumption of node, show the effect that increases the network lifetime. Existing clustering techniques proposed the method that increases the network lifetime equalizing each node's the energy consumption by rotating the role of CH(Cluster Head), but these algorithm did not present the resolution that minimizes the energy consumption of neighboring nodes with sink. In this paper, we propose the clustering algorithm that prolongs the network lifetime by not including a part of nodes in POS(Personal Operating Space) of the sink in a cluster and communicating with sink directly to reduce the energy consumption of CH closed to sink.

• Journal of Korean Medical classics
• /
• v.22 no.1
• /
• pp.71-85
• /
• 2009

For having good therapeutic value, putting the ideal of diagnosis and treatment based on overall analysis of symptoms and signs[辨證施治] into practice is very important, so the Eastern Medicine's peculiar diagnosis without interference by the western medical diagnosis is very important. The peculiar method of Eastern Medicine's diagnosis is four methods of diagnosis(四診法), a joint term for inspection, auscultation and olfaction, interrogation, pulse feeling and palpation. In the process of interrogation[問診], from analyzing the perspiration phase, doctor can get various physical information. Especially perspiration from particular region can be a clue for founding focus or cause of disease. This thesis divide the phase of perspiration into eight bodily region, perspiration from all body, head, face, back, chest and armpit, stomach, pubic region and lower part, hands and feet, and inquire the possible causes and principles of these perspirations. In conclusion, the regional perspiration can be a clue point out the origin of fever and condition of Gi(氣) flow. Perspiration from head, back, chest and armpit, hands and feet means that certain fever cannot extend to the outside of body, and at the same time, means the Gi(氣) flow of outside is being intercepted. So the perspirations from that region become an object of medical treatment.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.84-88
• /
• 2009

The nickel-based alloy Nimonic 80A possesses strength, and corrosion, creep and oxidation resistance at high temperature. The exhaust valves of low speed diesel engines are usually operated at temperature levels of 400-$600^{\circ}C$ and high pressure to enhance thermal efficiency and exposed to the corrosion atmosphere by the exhaust gas. Also, the exhaust valve is subjected to repeated thermal and mechanical loads. So, the nickel-based alloy Nimonic 80A was used for the large exhaust valve spindle. It is composed a 540mm diameter head and a 125mm diameter stem. It is developed large products by hot closed-die forging. Manufacturing process analysis of the large exhaust valve spindle was simulated by closed die forging with hydraulic press and cooled in air after forging. The preform was heated to $1080^{\circ}C$ Numerical calculation was performed by DEFORM-2D, a commercial finite element code. Heat transfer can be coupled with the deformation analysis in a non-isothermal deformation analysis. Mechanical properties of the large exhaust valve spindle were evaluated by the variety of tests, including microstructure observation, tensile, as well as hardness and fatigue tests, were conducted to evaluate the mechanical properties for head part of exhaust valve spindle.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.4
• /
• pp.167-180
• /
• 2011

Recently, 3-D audio technologies are commonly implemented through headphones. A major problem of the headphone-based 3-D audio is in-the-head localization, which occurs due to the inaccurate Head-Related Transfer Function (HRTF). Since the individual measurements of HRTFs are impractical, there have been several researches for HRTF customization. In this paper, an efficient method of customizing HRTFs for the sound externalization is proposed. Firstly, it is determined which part will be customized in HRTF through psychoacoustical experiments. Then, the method controlling spectral notches and envelopes to provide individual localization cues are described. Since the proposed method is based on a critical-band rate, the structure is much simpler than that of previous studies, but still effective. The performance was evaluated through a series of subjective tests, and the results confirmed that the customized HRTF using proposed method could replace the measured individual HRTF successfully.

• Journal of Korean Foot and Ankle Society
• /
• v.11 no.1
• /
• pp.111-114
• /
• 2007

Open calcaneal fracture with more than lateral half of bone loss and soft tissue defect occurred in 17 year-old male patient due to motor vehicle accident. Soft tissue defect included heel pad, peroneal tendon. Bone loss involved mainly most part of inferior tuberosity but not subtalar joint. Open dressing and debridement were done daily in operating room and antibiotics administration was started. After granulation tissue formed, femoral head allograft was performed and fixed with 6.0 mm screws to replace bone defect. Soft tissue defect was covered with latissimus dorsi musculocutaneous free flap. No sign of infection nor major osteolysis was observed in 15 months follow up period. Soft tissue defect was covered with latissimus dorsi musculocutaneous free flap.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.7
• /
• pp.801-807
• /
• 2005

Any failure of intake and exhaust valves of marine diesel engine must be regarded as serious, and any steps which can be taken to prevent such failure are desirable. The purposes of this study is to investigate and to analyse the failure causes of intake and exhaust valves for marine diesel engine during sea trial after completion of overhauling. In this study, to analyse the failure causes, we have carried out on board inspection, fractography test and discussion based on the specimen and repairing report provided by the ship owner. From the results of above inspection, test and discussion, it has been considered reasonable to conclude that the causes of damaged valves of the ship are as follow ; 1) During operation, the stick or seizure of valve spindle occurred and hence the movement of exhaust valve spindle was to be resisted and subsequently the engine was to be operated under an unappropriated valve timing and the exhaust valve sustained the repeated loads exceeding the fatigue strength of valve material. 2) By the loads above described, the fatigue fracture was initiated at the structural noncontinuous part of exhaust valve spindle, and then the valve head was finally fractured and dropped in the cylinder. 3) The fractured exhaust valve head impacted the intake valve at various direction to be bent or damaged.