• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.3
• /
• pp.31-40
• /
• 2022

PURPOSE: This study was conducted to investigate the effects of postural control training using a visual blind board, on head control, trunk control, and the sitting abilities of children with moderate-to-severe cerebral palsy. METHODS: Ten children with moderate to severe cerebral palsy participated in this study. Postural control training with a visual blind board was given for 40 minutes per session, 3 times a week for 4 weeks (12 sessions). Before and after the intervention, head control, trunk control, and sitting abilities were quantified using the head control scale, Korean version-trunk control measurement scale, and the sitting part of the Korean version-gross motor function measure-88, respectively. RESULTS: Postural control with the visual blind board significantly improved the head control ability of children with moderate to severe cerebral palsy (p = .015). Their trunk control abilities also showed significant improvement after the intervention (p = .016). However, their sitting ability did not show a significant change. CONCLUSION: These results showed that postural control training using a visual blind board is effective in improving the head and trunk control abilities of children with cerebral palsy. Further studies with suitable sample sizes and control groups are needed to reach a conclusion about the use of postural control training with visual blind boards for improvement of postural control of children with moderate to severe cerebral palsy.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.446-450
• /
• 2002

Pneumatic system has been mainly used as main equipment for actuation and control of compressed air force in manufacturing industry, pneumatic circuit for the most part is used in Meter-Out circuit. Meter-Out circuit method is Flow Control Valve to fit in exhaust part of cylinder port. In the reverse, Meter-In circuit is Flow Control Valve to fit in input part of cylinder port. This study examines the dynamic characteristics comparison of Meter-In and Meter-Out Circuits in the pneumatic circuits. The results of the experimental research are obtained to the followings: i ) System Response is Meter-In Circuit more than Meter-Out one before cushion zone. ii) we conjectured that the collision of piston and head cover is ease to collide Meter-In Circuit more than Meter-Out one at the stroke end part.

• The Korean Journal of Zoology
• /
• v.36 no.2
• /
• pp.175-180
• /
• 1993

Eighty one specimens of nhodeus sericeus (Pallas, 1176) were collected at the upper stream of the Som River (37$^{\circ}$32' 38" N, 127$^{\circ}$58' 57" E: Maegok-ri, Konggun-myon, Hoengsong-gun, Kanguvon-do, Korea) which is a tributary of the Namhan River. This is the first report of the species in the southern part of the Korean Peninsula. This species is well discriminated from the other species in the genus nhodeus by the following respects. The number of scales of transverse series is more than 34 (range 34-37, mean 35.7 $\pm$0.7). Head is echo감or and snout is Bonder than those of the other species. The upper part of the eve is always black and the lateral body surfaces are reddish purple. It had been hem that the southern limit of the distribution of Rhodeus sericeus was the Yonghung River in Hamgvongnam-do, north-eastern part of the Korean Peninsula. But their distributional range is extended more southerly to the Han River system which tons westward through the central part of the Korean Peninsula.Peninsula.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.2
• /
• pp.64-74
• /
• 1994

The gundrill is capable of machining for having large length to diameter ratio in single pass. The techniques of gundrill and gun boring began developing in the late 18th century with the need for more accurate bores in rifle, cannon, machinery part and marine part etc. The main feature of the gun drilling provides a stabilizing cutting force resultant necessary for self guidance of the drill head. A study of the accuracy and surface finish of holes produced would reveal quite useful information regarding the process. The thesis deals with the experimental results obtained during gun drilling on marine part materials for different machining conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.1
• /
• pp.105-115
• /
• 1991

This paper describes an integrated CAD and CAPP system for prismatic parts of injection mold which generates a complete process plan automatically from CAD data of a part without human intervention. This system employs Auto CAD as a CAD model and GS-CAPP as an automatic process planning system for injection mold. The proposed CAD/CAPP system consists of three modules such as CAD data conversion module, manufacturing feature recognition module, and CAD/CAPP interface module. CAD data conversion module transforms design data of AutoCAD into three dimensional part data. Manufacturing feature recognition module extracts specific manufacturing features of a part using feature recognition rule base. Each feature can be recognized by combining geometry, position and size of the feature. CAD/CAPP interface module links manufacturing feature codes and other head data to automatic process planning system. The CAD/CAPP system can improve the efficiency of process planning activities and reduce the time required for process planning. This system can provide a basis for the development of part feature based design by analyzing manufacturing features.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.3
• /
• pp.8-14
• /
• 2016

Medical bed head consoles (BHC) are generally used to increase the efficiency of medical equipment and speed the medical treatment response time. The BHC design has been consistently improved including a movable shelf unit that is embedded to mount stably medical instruments on the lower part of the main console. The cost of a BHC can be reduced through design optimization to limit the overall weight. However, as the size of a head console might decrease due to design optimization, the BHC deflection could be increased. In this study, multi-objective optimal design was adopted to consider this BHC design problem. In order to reduce the cost of optimization planning, an approximate model was applied for the design optimization. In the context of approximate optimization, we used the response surface method and non-dominant sorting genetic algorithm developed from various fields. Multi-objective optimal solutions were also compared with a single objective optimal design.

• Korean Journal of Bronchoesophagology
• /
• v.14 no.1
• /
• pp.46-49
• /
• 2008

Neurofibroma is a neurogenic tumor arising from schwann cells or peripheral tissues of nerve sheaths. Neurofibroma rarely occurs as a solitary lesion but mostly occurs as part of neurofibromatosis and reports of neurofibromas developed in the nasal cavity or paranasal sinus are very rare. We report on a case of neurofibroma of the nasal cavity treated by endoscopic surgery. Preoperative computed tomography(CT), and punch biopsy suggested that the tumor was benign neurogenic tumor cofined to right nasal cavity. The tumor was removed with endoscopic surgery completely, and confirmed as neurofibroma by histological and immunohistochemical examination. We discuss the clinical and pathological characters of neurofibroma arising in the nasal septum.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.4
• /
• pp.359-370
• /
• 1994

The reconstruction of major head and neck defects must be an integral part of the overall cancer treatment plan. The priorities of surgical treatment of head and neck tumor are 1) local tumor control, 2) relief of pain, 3) avoidance of difficult dressing, 4) provision of oral continence, and 5) ability to swallow and manage saliva. The recent advances in reconstructive surgery including the development of musculocutaneous flaps and microvascular free tissue transfer have allowed the surgical restoration of head and neck tumor defects that previously were not possible. These techniques have provided the opportunity to undertake larger, more aggressive resection while at the same time permitting functional rehabilitation. The timing of reconstruction demands on the nature of the resection, the ability of the ablative and reconstructive teams to coordinate efforts, the overall health of the patients, the patient's needs and wishes. So, we report to emphasize current methods for restoring major head and neck tumor defects after tumor ablation, reviewing for the reconstructive operations, postoperative complications, and postoperative sequelae etc, of patients from Jan, 1990 to Dec, 1993.

• Imaging Science in Dentistry
• /
• v.31 no.4
• /
• pp.209-214
• /
• 2001

Purpose: To investigate the ability of double TMJ view by multifunctional panorama to view the bony components and the space of the temporomandibular joint. Materials and Methods: Ten dry skulls fitted with resin shims over the articular surface of the condyle were used to reproduce the temporomandibular joint space. Fine metal wires were attached to the three portions of contours of the condylar head and the articular eminence. With 10 dry skulls and 20 cases having TMJ dysfunction, double TMJ views by multifunctional panorama (Planmeca 2002 Proline CC) and transcranial views were taken, analyzed from the anatomical view point, and compared statistically in view of the widths of the posterior joint space and the condylar head. Results: In double TMJ view, the supero-anterior part of the condyle represented the lateral 1/3, the most superior part represented center portion, and the posterior part medial l/3 of the condyle. In maximum mouth opening, no other structures were superimposed with the condyle in double TMJ view. In double TMJ view, petrous bone was moderately superimposed with the superior part of the condyle and the posterior increment of angle exposure made wider the images of the articular eminence and the condyle. The tendency of reduction in the posterior joint space appeared in the side of TMJ dysfunction compared with the normal side. The posterior joint spaces in double TMJ view were statistically wider (p<0.05) than those in transcranial view. The correlation coefficient was 0.5179 between the widths of the posterior joint spaces in two radiographic views. Conclusions: Double TMJ view can be substituted for transcranial view in evaluating the TMJ dysfunction.

• Clinics in Shoulder and Elbow
• /
• v.21 no.4
• /
• pp.220-226
• /
• 2018

Background: This study introduces a surgical technique with good clinical outcome useful in the treatment of osteoporotic displaced 3- or 4-part proximal humeral fractures. Methods: From May 2014 to February 2016, 16 patients with displaced 3- or 4-part proximal humeral fractures were treated by application of a locking plate with an endosteal strut allograft via a deltoid splitting approach with a minimum follow-up of 12 months. The allograft was inserted through a fractured gap of the greater tuberosity to support the humeral head and then fixed by a locking plate with meticulous soft tissue dissection to protect the axillary nerve. Surgical outcomes were evaluated by the American Shoulder and Elbow Surgeons (ASES) and visual analogue scale (VAS) scores, radiological imaging, and clinical examination. Fixation failure on radiographs was defined as a >$5^{\circ}$ loss of neck shaft angle (NSA) compared to that on an immediate postoperative radiograph. Avascular necrosis (AVN) of the humeral head was also evaluated. Results: In all cases, complete union was achieved. The ASES and VAS scores were improved to $85.4{\pm}2.1$ and $3.2{\pm}1.3$, respectively. Twelve patients (75.0%) had greater than a $5^{\circ}$ change in NSA; the average NSA change was $3.8^{\circ}$. Five patients (31.3%) had unsatisfactory ranges of motion exhibiting a <$100^{\circ}$ active forward flexion. No axillary nerve injuries or AVN were observed at the last follow-up. One patient was converted to reverse total arthroplasty due to severe pain and functional deficit. Conclusions: Minimally invasive fixation via a locking compression plate and an endosteal fibula strut allograft in Neer classification 3-or 4-part fractures with severe osteoporosis in elderly patients can achieve good clinical results.