• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.247-264
• /
• 2023

Objectives: The study was to examine the features of three-dimensional(3D) face dimensions and to develop fit test panels for the labor population using respirators in South Korea. Methods: This study was part of the first-year work of a two-year-project conducted at Occupational Safety and Health Research Institute in 2021. After 3D head dimensions data were collected from Size Korea Center managing Sixth Size Korea databases, 3D face dimensions DB for the South Korean labor population was established for 21 items of face dimensions in line with the ISO/TS 16976-2 and KS A ISO 15535. With the South Korean labor population 3D face dimensions DB, in accordance with the ISO/TS 16976-2, the descriptive statistics of 3D face dimensions were calculated and two fit test panels were developed. Results: A total of 2,752 subjects were finally determined and they were 52.9% for male, 41.2% for the highest age-group of 15-29, and residents in the capital area. Mean and standard deviation were obtained for each of the 21 3D face dimensions items for the South Korean labor population. Among the items, male and female face widths were 137.6±5.7 mm, 133.2±5.0 mm, respectively. Male and female face lengths were 116.6±7.0 mm, 107.8±6.8 mm, respectively. Two new South Korean fit test panels, a bivariate test panel and a principal component analysis test panel, were developed using the 3D face dimensions DB as well. Conclusions: Using the 3D face dimensions DB, the mean and standard deviation were featured for each of the 21 items and also the two fit test panels were newly developed in the study. It is suggested that the study outputs should be utilized practically and effectively in selection, use, and management of respirators at work, expecting that respiratory protection can be furthermore improved for respirator users including labor population across the country.

• Korean Journal of Environmental Biology
• /
• v.22 no.3
• /
• pp.351-368
• /
• 2004

Following the previous experiments, a starvation experiment was conducted to determine the influence of feeding and starvation on the histological and biochemical changes, the morphormetric changes in the sectioned body and the morphometric changes in Rhynchocypris oxycephalus (Sauvage and Dabry). The influence of starvation on nutritional conditions of the histological changes of hepatocyte and intestinal epithelium as hepatosmatic index (HSI), protein, RNA and DNA concentrations of liver in R. oxycephalus was tested. Although the starved group showed higher concentrations of protein, DNA and RNA than the fed group, food deprivation resulted in a decrease in the HSI, hepatocyte nucleus size and nuclear height of the intestinal epithelium. The RNA - DNA ratio appears to be a useful index of nutritional status in R. oxycephalus and may be useful for determining if R. oxycephalus is in a period of rapid or slow growth at the time of sampling. Additionally, the data have been interpreted in detail and some biologically important relationships discussed. The effects of starvation on the morphometrical changes in sectioned body traits, condition factor, viscera index and dressing percentage were determined for evaluating nutritional conditions of R. oxycephalus. Starvation for nine weeks resulted in a decrease in most sectioned traits as well as in condition factor and viscera index (P<0.05). These findings suggest that nutritional parameters used in this study appear to be a useful index for nutritional status in this species. The data has been interpreted in detail and some important body sectioned values of interest to commercial growers discussed. A 75-day study was conducted to determine the effect of starvation on classical and truss parameters in R. oxycephalus. Truss dimensions of almost the entire head and trunk region as well as the abdomen were increased significantly through feeding or starvation (P<0.05). Truss dimensions of the caudal region generally decreased through feeding or starvation, particularly those dimensions at the hind part of the trunk. There were some significant decreases in classical dimensions of the head region during feeding, in relation to body depth characteristics in the trunk and caudal region during starvation, whereas there was only one decreasing classical dimension in the caudal region during feeding. The results of this study indicate that application of the truss network as a character set enforces classical coverage across the body form, discrimination among experimental groups thus being enhanced. Considering that the dimension of the lower part of the head and some truss and classical dimensions were least affected by feeding and starvation, these dimensions may then be useful as a taxonomical indicator to discriminate the species of Rhynchocypris sp. The value of trunk region dimensions with a large component of body depth in R. oxycephalus is most likely to be compromised by variability related to differences in feeding regimes of fish in different habitats.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.2 no.2 s.5
• /
• pp.95-104
• /
• 2002

This paper presents the pull-out failure mode on Headed Bars and prediction of tensile capacity, as governed by concrete cone failure. 17 different plate types, three different concrete strengths and three different welding types of specimens were simulated. Test variables are the reinforcing bar diameters connected to headed plate (e.g., 16mm, 19mm and 22mm), the head plate shapes (e.g., circular, square, rectangular), the dimensions of head plates (e.g., area and thickness), the types of welding scheme for connection of reinforcing bars and head plates (e.g., general welding and friction welding). Headed Bars were manufactured in different areas, which shape and thickness are based on ASTM 970-98. Calculation of Embedment length in concrete is based on CSA 23.3-94, and static tensile load was applied. Pullout capacities tested were compared to the values determined using current design methods such as ACI-349 and CCD method. If compare experiment results and existings, Headed bar expressed high strength and bigger breakdown radious than standard by wide plate area and anomaly reinforcing rod unlike anchor.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.3
• /
• pp.279-291
• /
• 2024

Objective: This was to develop headforms for the labor population, based on a three-dimensional(3D) face dimensions data base(DB) and a principal component analysis(PCA) fit test panel, in selection, use and maintenance of respirators in Korea. Methods: This study was part of a two-year-project initiated in 2021. The study was designed and conducted in line with ISO 16976-2 while subjects were those employed in the development of the PCA fit test panel. The approaches included literature review; examination on conformity of the 3D face dimensions DB; and development of headforms representing the labor population. The mean data were used in order to construct each model of the headforms through a way of 3D modeling and 3D printing technology. Results: A total of 2,752 subjects were determined. Five models of headforms(small, medium, large, long-narrow, short-wide) were completely constructed for the labor population. For example, means of the 10 face dimensions for medium headform model were: minimum frontal breadth 106 mm, face width 136 mm, jaw width 127 mm, face length 111 mm, interpupillary distance 69 mm, head breadth 164 mm, nose protrusion 12 mm, nose breadth 34 mm, nasal root breadth 35 mm, and nose length 50 mm. Conclusions: Five models of headforms were newly constructed using the study data. It is likely desirable that the constructed headforms, together with the 3D face dimensions DB as well as the PCA fit test panel, can be utilized more effectively in selection, use and maintenance of respirators for users including the labor population.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.107-110
• /
• 2006

The dimensions of the human body vary by age, sex, and race. The internal structure and outer dimensions of a body exposed to an electromagnetic field is important for accurate dosimetry. The average physical size of Korean adult males between the ages 18 to 24 was investigated, and a male volunteer was selected whose physical condition is within the physical standards, ${\pm}5%$. Magnetic resonance images and partially computerized tomography images of the volunteer were acquired. The intervals between the transverse images were 1 mm for the head and 3 mm for the rest of the body. About 30 different tissues were manually classified by an anatomist on the raw images, and the segmented images were implemented in the form of a text file appropriate for numerical formulation.

• The Research Journal of the Costume Culture
• /
• v.11 no.2
• /
• pp.243-252
• /
• 2003

The study was designed to review the changes in designs and the manufacturing methods of french hood, one of the headdresses which play an important role in showing the appearance of costume, to understand design expression techniques through manufacturing of the head dress of the western costumes, and to provide materials to exert creativity for new designs. Based on literature review and portrait study, 1 manufactured a frenchhood. I set the study cope as from the late 15 century when frenchhood was used for the first time, to the mid 16 century. For the frenchhood selected, 1 examined the hair style, the characteristics of the french hood, and the pattern first, and proceeded to manufacturing. 1 used velvet and silk for the textile as explained in the literature. And, 1 purchased such similar ornaments as shown in the pictures, making the color so similar to the original to the most. Dimensions in manufacturing were those In the literature, since the study is focusing on the reproduction of the features of the portraits. Dimensions of detailed decoration were measured using the ratio of the headdress in the portraits.

• Journal of Biosystems Engineering
• /
• v.17 no.2
• /
• pp.171-176
• /
• 1992

This study was intended to develop the design theory of the threshing unit of a head-feeding rice combine. It may be applied for various combining capacities with different cutting widths and forward speeds. Design factors in the theoretical development are : (1) dimensions of the threshing drum, (2) tooth approching angle, (3) distance between the adjacent teeth on their spiral setting line, (4) number of spirals, and (5) total number of teeth on the drum. A computer simulation program was developed to predict the proper dimensions for the threshing drum and tooth arrangement. A simulation for the prospective combine with varied capacities was also demonstrated. The parameters analyzed in the developed design theory were shown to be consistent with those of existing combines.

• Archives of Craniofacial Surgery
• /
• v.22 no.3
• /
• pp.173-176
• /
• 2021

Basal cell carcinoma is a malignant epithelial neoplasm of the skin and the most common human skin cancer. It is generally associated with a good prognosis. In this case report, a giant basal cell carcinoma of the nodulo-ulcerative type showing wide ulceration with marginal multiple small nodules, is presented. It was trapezoidal in shape, having dimensions of 7 cm at the greatest basal width, 6 cm vertically with different anterior and posterior margin dimensions, and 5 cm horizontally at the top margin. After wide excision of the lesion including 5-10 mm safety margins, the wound was reconstructed with a local skin flap and split-thickness skin graft. The reconstructed wound healed well without recurrence for 1 year.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.136-139
• /
• 2004

The requirement of planarity, such as with-in-wafer nonuniformity, post thickness range, have become increasingly stringent as critical dimensions of devices are decreased and a better control of a planarity become important. The key factors influencing the planarity capability of the CMP process have been well understood through numerous related experiments. These usually include parameters such as process pressures, relative velocities, slurry temperature, polishing pad materials and polishing head structure. Many study have been done about polishing pad and its groove structure because it's considered as one of the key factors which can decide wafer uniformity directly. But, not many study have been done about polisher head structure, especially about polisher head plate design. The purpose of this paper is to know how the plate structure can affect wafer uniformity and how to deteriorate wafer yield. Furthermore, we studied several new designed plate to improve wafer uniformity and also improve wafer yield.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.170-176
• /
• 2018

Recently, weapon system requires personal protection products due to the explosion of rapid-fire explosion, which is considered to be multi threat in modernization, complication and war against terrorism. However, the conventional Korean military bullet protection helmets are not suitable for wearing convenience and combatant interoperability in terms of ergonomic. In this paper, we propose a suitable 3D Scanning method for the head, and compare the measured 3D dimension with the existing 2D measurement value to identity the reliability. Reverse engineered soldier head using the quick surface method was realized with a perfect free-form surface and satisfactory tolerance range (${\pm}0.2mm$). Through the comparison of 3D and 2D measured head dimensions, the absolute error value was 0.73 mm on average and relative error was 0.35 %, confirming the high accuracy of the 3D scan modeling. Also, quick surface method using 3D scanner is suggested a fast and accurate skill for ergonomics in obtaining the head modeling needed for military's personal bullet protection helmet design.