• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.1
• /
• pp.62-68
• /
• 1999

One of the many dilemmas that the clinical restorative dentist must face is treating young adolescent patient who prematurely loses his permanent teeth. Temporary prosthetic replacement can be achieved with removable denture, orthodontic band-wire fixed denture, adhesion bridge, composite resin splint with reinforcing material until the patients go through growth and development. But, all of these have limitations. Advances in restorative materials and reinforcement materials have made possible new techniques which are as much esthetic, conservative and more economic and stronger than adhesion brides. Two cases are being presented where gas-plasma treated, woven polyethylene fabric to reinforce composite resin was used to fabricate a temporary prosthetic restoration to replace a missing maxillary central incisor. This relatively noninvasive and basically reversible procedure allows the patient to decide the final restoration as he or she goes thorough maturation of the hard and soft tissues.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.104-110
• /
• 1998

In automotive industries, various processes for the cost reduction have been investigated lively. As one of them, powder metallurgy becomes influential. Compared to other methods used for he manufacture of steel components the Powder metallurgy process is competitive primarily due to the small number of production steps to reach the final geometry and thereby also the energy-efficiency. In this paper, to alter present forging process into powder metallurgy process by which the automotive clutch disc spline hub is manufactured machining process, the mechanical properties of sintered materials is investigated by specimen test. Selecting the 3 kinds of materials-SMF 4040, SMF 9060 and DHP-1, their properties according to heat treatment such as carburizing -tempering and plasma-nitrodizing are compared. By result of specimen test - tensile test, compression ring test, Impacting test, measurment of hardness, and microstructure analysis - we concluded that SMF 9060 and carburizing-tempering heat treatment is an optimal material and heat treatment method for the spline hub. It will be able to reduce manufacturing cost and weight.

• Nutritional Sciences
• /
• v.8 no.4
• /
• pp.237-241
• /
• 2005

The present study was performed to elucidate the hypocholesterolemic action of lecithin on the diet-induced hypercholesterolemia in rats. Male Sprague-Dawley rats (n=24) were fed lecithin-free (control) diet or diets containing $2\%\;or\;5\%$ lecithin for 4 weeks. Hypercholesterolemia was induced by adding $1\%$ cholesterol and $0.5\%$ cholic acid to all diets. No difference was found in food intake and body weight gain among groups. The lecithin treated groups showed significant improvement in the plasma levels of total cholesterol and LDL-cholesterol (p<0.05) compared to the control group, while the plasma triacylglyceride was not significantly affected 1he atherogenic index and HDL-cholesterol level were decreased in the lecithin groups. The diets with $2\%\;or\;5\%$ lecithin significantly decreased the activity of cholestetyl ester transfer protein (CETP) by $14\%\;or\;17\%$, respectively. Also, lecithin diets increased the activity of lecithin: cholesterol acyltransferase (LCAT). These results suggest that lecithin accounts for the hypocholesterolemic effect due to the decreased CETP activity and increased LCAT activity.

• Tribology and Lubricants
• /
• v.23 no.1
• /
• pp.14-18
• /
• 2007

SCM415 alloy was implanted with nitrogen ions using plasma source ion implantation (PSII), at a dose range of $1{\times}10^{17}\;to\;6{\times}10^{17}N^{+}cm^{-2}$. Auger electron spectrometry (AES) was used to investigate the depth profile of the implanted layer. Friction and wear tests were carried out on a block-on-ring wear tester. Scanning electron microscopy (SEM) was used to observe the micro-morphology of the worn surface. The results revealed that after being implanted with nitrogen ions, the frictional coefficient of the surface layer decreased, and the wear resistance increased with the nitrogen dose. The tribological mechanism was mainly adhesive, and the adhesive wear tended to become weaker oxidative wear with the increase in the nitrogen dose. The effects were mainly attributed to the formation of a hard nitride precipitate and a supersaturated solid solution of nitrogen in the surface layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1021-1023
• /
• 2003

We studied field-emission characteristics of CNTs under various pre-treatment with $NH_{3}$ plasma on the substrate. The turn-on electric field is the lowest value and field enhancement factor (${\beta}$) is he highest value in CNTs pre-treated by $NH_3$ plasma (80 W and 5 min). The field-emission property of CNTs grown on the Ta substrate is slightly better than on the W substrate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.10
• /
• pp.846-851
• /
• 2007

In this work, the etching characteristics of $Ge_2Sb_2Te_5(GST)$ thin films were investigated using an inductively coupled plasma (ICP) of $Cl_2/Ar$ gas mixture. To analyze the etching mechanism, an optical emission spectroscopy (OES) and surface analysis using X-ray photoelectron spectroscopy (XPS) were carried out. The etch rate of the GST films decreased with decreasing Ar fraction. At the same time, high selective etch rate over $SiO_2$ films was obtained and the selectivity over photoresist films decreased with increasing the he fraction. From XPS results, we found that Te halides were formed at the etching surface and Te halides limited the etch rate of the GST films.

• Laser Solutions
• /
• v.2 no.3
• /
• pp.11-18
• /
• 1999

This paper describes the weldability of carbon steel and stainless steel using 5㎾ $CO_2$ laser system with nearly multi-mode beam and a parabolic focusing mirror. In the laser welding of steels, major welding parameters are focal point, travel speed, beam power, shield gas and gap tolerance, etc.. Two kinds of gases(Ar, He) were used as a assist gas and supplied through the external nozzle. It is very important for optimum condition to remove plasma plume which absorbs laser beam and to obtain deep penetration and sound weld bead. Bead-on-plate welding tests were carried out for the experiments. Penetration data were obtained with various welding parameters and the effects of welding parameters were discussed. Butt welding tests were performed with various conditions. Only the optimum laser parameters assured good weld quality As a result of this study, We achieve the fundamental weldabilities using a high power $CO_2$ laser for carbon steel and stainless steel.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.3
• /
• pp.89-92
• /
• 2011

Hydrogenated amorphous carbon (a-C:H) films were deposited by plasma enhanced chemical vapor deposition on silicon substrates. a-C:H thin film was irradiated to a typical He-Cd laser to study its emitting properties. The photoluminescence (PL) intensity during the irradiation achieved a maximum value when 2,000 seconds elapsed. Fourier transform infrared measurement revealed a-C:H thin film suffered transformation from a polymer-like to graphite-like phase during laser irradiation. Thermal annealing was done at various temperatures, ranging from room temperature to $400^{\circ}C$ in the atmosphere, to investigate structural changes in a-C:H film by heat generation during the emission. PL intensity of a-C:H thin film increased 1.5 times without apparent structural change, as annealing temperature increased up to $200^{\circ}C$. However, a-C:H film above $200^{\circ}C$ exhibited significant decrease of PL accompanying dehydrogenation. This led to a red shift of the PL peak.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.177-177
• /
• 1998

In the previous report, tetrandrine (TET) and fangchinoline (FAN) showed antithrombotic and antiplatelet aggregation activities. The present study was undertaken to investigate the effects of tetrandrine and fangchinoline on human platelet aggregation, formation of thromboxane B$_2$ and coagulation of platelet poor plasma. TET and FAN inhibited platelet activating factor (PAF) induced human platelet aggregation, but didn't inhibit the specific binding of PAF to its receptor. Meanwhile, TET and FAN also inhibited PAF, thrombin and arachidonic acid induced thromboxane B$_2$ formation in human washed platelets. In addition, neither TET nor FAN showed any anticoagulation activities in the measurement of the activated partial thromboplastin time (APTT), prothrombin time (PT) and thrombin time (TT) using human platelet poor plasma. These results suggest that antithrombotic effects of TET and FAN in mice may be mainly related to the antiplatelet aggregation activities, and the antiplatelet aggregation effects may be related to the intracellular messenger system such as TXA$_2$ formation etc., but not to the binding of PAF to PAF-receptor on the platelet membrane directly.

• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.140-148
• /
• 1998

We prepared $C_3N_4$ films by rf plasma enhanced chemical vapor deposition(PCVD) and alternating $C_3N_4$/TiN composite films by dc magnetron sputtering. X-ray diffraction (XRD) and transmission electron diffraction (TED) revealed that the structure of the films is amorphous or polycrystalline, depending on deposition conditions and heat treatment. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy confirmed the presence of $sp_3\; and sp _2$ hybridized C atoms bonded with N atoms in the tetrahedral and hexagonal configurations, respectively. Graphite-free $C_3N_4$ films were obtained by PCVD under optimal conditions. To prepare well crystallized $C_3N_4$ films by magnetron sputtering, we introduced negatively biased gratings in the sputtering system. CN films deposited at grating voltages (Vg) lower than 400V are amorphous. Crystallites of cubic and $\beta$-$C_3N_4$ were formed at increased voltages.