• Journal of Environmental Health Sciences
• /
• v.44 no.3
• /
• pp.283-292
• /
• 2018

Objectives: This study was conducted to identify hazardous factors that reflect the characteristics of the academy and to provide basic data of environmental safety standard. Methods: Heavy metals, volatile organic compounds, formaldehyde, pesticides and phthalates were measured in 20 academies, which were supplementary, music, art and physical education institutes. Results: In case of heavy metals, the 12 locations were detected for lead (Pb) over the standard value, and 15 locations were exceeded for the total heavy metal. In six locations, the concentrations of volatile organic compounds were exceeded the standard value of $400{\mu}g/m^3$, and two locations for formaldehyde were exceeded the standard value of $100{\mu}g/m^3$. The most commonly detected agents in the air dust were chlorpyrifos and diazinon. The concentrations of DEHP, DINP, and DBP were detected and exceeded in several academies, The risk assessment results showed that HCHO as carcinogen had a safety level of 10-7 to 10-6, and DEHP and DINP as non-carcinogens had a safety level as assessed to be under than 0.1. Conclusions: Through the investigation of long-term environmental and health effects related laws on academies, indoor air quality management might be needed because there were cases of exceeding standard.

• The Journal of Korean Medicine
• /
• v.31 no.4
• /
• pp.9-19
• /
• 2010

Objective: To compare the contents and transfer rate of hazardous substances in crude, washing solution, crude after washing, decoction and remnant after boiling. Methods: The heavy metal contents of each step were measured by inductively coupled plasma mass spectrometer (ICP-MS) and mercury analyzer (SP-3DS). In order to analyze pesticides in each sample we used simultaneous multi-residue analysis of pesticides by GC/ECD, which was followed by GC/MSD analysis to confirm the identity of the detected pesticide in each sample. In addition, the contents of sulfur dioxide ($SO_2$) were performed by Monier-Williams distillation method. Results: 1. Contents (mg/kg) of heavy metals were not detected in decoctions of any tested herbal medicine prescriptions. 2. Transfer rates (%) of heavy metals from crude to remnant were as follows: Yijin-tang (As: 46.9, Cd: 50.0 and Pb: 100.0), Oryung-san (As: 80.0, Cd: 100.0 and Pb: 73.8), Hwangryunhaedok-tang (As: 88.9, Cd: 71.4 and Pb: 92.7), Bangpungtongseong-san (As: 100.0, Cd: 17.3 and Pb: 56.1), Oyaksungi-san (As: 47.4, Cd: 175.0 and Pb: 142.4). 3. Contents (mg/kg) of residual pesticides were not detected in any samples. 4. Transfer rate (%) of sulfur dioxide ($SO_2$) from crude to remnant in all samples were as follows: Yijin-tang (25.0), Oryung-san (166.7), Hwangryunhaedok-tang (50.0), Bangpungtongseong-san (181.8), Oyaksungi-san (50.0). Conclusion: Our results showed that the boiled herbal medicine prescriptions which we take are safe from the hazardous substances.

• Environmental Analysis Health and Toxicology
• /
• v.30
• /
• pp.4.1-4.11
• /
• 2015

Objectives: This survey was designed to conduct the first nationwide dietary exposure assessment on hazardous substances including the intakes of functional food and herbal medicine. In this paper, we introduced the survey design and the results of the dietary exposure status and internal exposure levels of lead (Pb), cadmium (Cd), and mercury (Hg). Methods: We selected 4867 subjects of all ages throughout Korea. We conducted a food survey, dietary survey, biomonitoring, and health survey. Results: Pb and Cd were the highest (median value) in the seaweed ($94.2{\mu}g/kg$ for Pb; $594{\mu}g/kg$ for Cd), and Hg was the highest in the fish ($46.4{\mu}g/kg$). The dietary exposure level (median value) of Pb was $0.14{\mu}g/kg$ body weight (bw)/d, $0.18{\mu}g/kg$ bw/d for Cd, and $0.07{\mu}g/kg$ bw/d for Hg. Those with a blood Pb level of less than $5.00{\mu}g/dL$ (US Centers for Disease Control and Prevention, reference value for those 1 to 5 years of age) were 99.0% of all the subjects. Those with a blood Cd level with less than $0.30{\mu}g/L$ (German Federal Environmental Agency, reference value for non-smoking children) were 24.5%. For those with a blood Hg level with less than $5.00{\mu}g/L$ (human biomonitoring I, references value for children and adults, German Federal Environmental Agency) was 81.0 % of all the subjects. Conclusions: The main dietary exposure of heavy metals occurs through food consumed in a large quantity and high frequency. The blood Hg level and dietary exposure level of Hg were both higher than those in the European Union.

• Journal of Environmental Health Sciences
• /
• v.48 no.4
• /
• pp.236-243
• /
• 2022

Background: In the case of multiple exposures to different types of heavy metals, such as the conditions faced by residents living near a smelter, it would be preferable to group hazardous substances with similar characteristics rather than individually related substances and evaluate the effects of each group on the human body. Objectives: The purpose of this study is to evaluate the utility of factor analysis in the assessment of health effects caused by exposure to two or more hazardous substances with similar characteristics, such as in the case of residents living near a smelter. Methods: Heavy metal concentration data for 572 people living in the vicinity of the Janghang smelter area were grouped based on several subfactors according to their characteristics using factor analysis. Using these factor scores as an independent variable, multiple regression analysis was performed on health effect markers. Results: Through factor analysis, three subfactors were extracted. Factor 1 contained copper and zinc in serum and revealed a common characteristic of the enzyme co-factor in the human body. Factor 2 involved urinary cadmium and arsenic, which are harmful metals related to kidney damage. Factor 3 encompassed blood mercury and lead, which are classified as related to cardiovascular disease. As a result of multiple linear regression analysis, it was found that using the factor index derived through factor analysis as an independent variable is more advantageous in assessing the relevance to health effects than when analyzing the two heavy metals by including them in a single regression model. Conclusions: The results of this study suggest that regression analysis linked with factor analysis is a good alternative in that it can simultaneously identify the effects of heavy metals with similar properties while overcoming multicollinearity that may occur in environmental epidemiologic studies on exposure to various types of heavy metals.

• Journal of Environmental Health Sciences
• /
• v.20 no.1
• /
• pp.62-67
• /
• 1994

Introduction : Recently, water and environmental pollution becomes serious social problem and high technology makes this pollution accelerate. Hydrogen sulfide, the main subject of our research, is one of the most dangerous air pollutant like SO$_x$ and NO$_x$. The major contaminant in coal gasification is H$_2$S, which is very toxic, hazardous and extremely corrosive. Therefore, control of hydrogen sulfide to a safe level is essential. Although commercial desulfurization process called liquid scrubbing is effective for removal of H$_2$S, it has drawbacks, the loss of sensible heat of the gas and costly wastewater treatment. Many investigations are carried out about high-temperature removal ol H$_2$S in hot coal-derived gas using metal oxide or mixed metal qxide sorbents. It was reported that ZnO was very effective sorbent for H2S removal, but it has big flaw to vaporize elemental zinc above 600\ulcorner \ulcorner As alternative, metal oxides such as CaO, $Fe_2O_3$, TiO$_2$ and CuO were added to ZnO. Especially, different results are reported for $Fe_2O_3$ additive. Tamhankar et al. reported SiO$_2$ with 45 wt% $Fe_2O_3$ sorbent is favorable for removal of H$_2$S and regeneration.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.120-125
• /
• 2001

Generally, hydroxyapatite(HAp), zeolite, carbon molecular sieve , activated carbon and alumina are used as heavy metal ions adsorption materials. Among those adsorption materials, HAp which has good positive ion-exchange ability with metal ion, and zeolite are utilized in wastewater treatment. Most of water pollutions are caused by hazardous heavy metals ions as well as bacteria in waste water. In this study, a adsorption materials (HAP and zeolite) are ion-exchanged with a well known antimicrobial metal ions, such as $Ag^+,\;Cu^{2+},\;and\;Zn^{2+}$, in order to give a adsorption of heavy metal ions and a killing effects of bacteria. The antimicrobial effects of adsorption materials are observed using by E. Coli. The results show that there is a complete antimicrobial effect in the adsorption materials with $Ag^+$ at the concentration of $1{\times}10^{-4}$cell/$m\ell$ of E. Coli until 24 hours. However, there is not good antimicrobial effects in the adsorption materials with $Cu^{2+},\;and\;Zn^{2+}$ substitution. Feng et. al. showed the denaturation effects of silver ions which induces the condensed DNA molecules and losing their replication abilities.

• Food Science and Preservation
• /
• v.24 no.8
• /
• pp.1094-1102
• /
• 2017

Hazardous metals leaching experiment was carried out in accordance with various usage environments for camping cooking utensils distributed in the market. There was a significant difference in the degree of migration for lead, arsenic, cadmium and nickel defending on the solvent and how to use, although they were all appropriate for criteria. In general, the migrated amount of aluminum was increased in acidic condition, and the migrated amount of arsenic was increased in salty condition. Physical scratches increased the overall release of hazardous metals from the portable pots and pans for camping in all solvents. Especially, in 0.5% citric acid solution, cadmium was migrated by physical scratch in stainless steel and hard aluminum pots and pans. The longer the leaching time, the higher the migration of aluminum in acid condition and arsenic in basic condition. From these results, it is desirable to use the cooking utensil for camping without being exposed to strong acidic or basic solution and scratches in order to reduce the migration of hazardous metals from them.

• Tunnel and Underground Space
• /
• v.19 no.6
• /
• pp.534-544
• /
• 2009

The collapse of the underground cavity can cause the abrupt local subsidence of the ground surface. It can be hazardous to the stability of road and building for human activity. Therefore it is necessary to develop reinforcement methods for the filling of the underground cavity. This study was executed to improve the material quality and systems to fill the calcium-aluminate mineral $(C_{12}A_7)$ environmentally, and minimize the loss of filling materials for the steep underground cavity. Filling material which was developed in this study is composed of rapid hardening material and additives. The developed material had rapid hardening and non-separation ability in the water cavity condition, so it made the effective underground dam in the cavity with prevention of material loss when it was poured in the water cavity. Results of heavy metal leaching test for environmental assessment showed that it was environmentally suiTable material for the filling in the mine cavity.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.2
• /
• pp.264-274
• /
• 1997

A numerical analysis on condensation and coagulation of the metallic species with fly ash particles pre-existing in an incinerator was performed. Waste was simplified as a mixture of methane, chlorine, and small amounts of Pb and Sn. Vapor-phase amounts of Pb- and Sn -compounds were first calculated assuming a thermodynamic equilibrium state. Then theories on vapor-to-particle conversion, vapor condensation onto the fly ash particles, and particle-particle interaction were examined and incorporated into equations of aerosol dynamics and vapor continuity. It was assumed that the particles followed a log-normal size distribution and thus a moment model was developed in order to predict the particle concentration and the particle size distribution simultaneously. Distributions of metallic vapor concentration (or vapor pressure) were also obtained. Temperature drop rate of combustion gas, fly ash concentration and its size were selected as parameters influencing the discharged amount of metallic species. In general, the coagulation between the newly formed metal particles and the fly ash particles was much greater than that between the metal particles themselves or between the fly ash particles themselves. It was also found that the amount of metallic species discharged into the atmosphere was increased due to coagulation. While most of PbO vapors produced from the combustion were eliminated due to combined effect of condensation and coagulation, the highly volatile species, PbCl$_{2}$ and SnCl$_{4}$ vapors tended to discharge into the atmosphere without experiencing either the condensation or the coagulation. For Sn vapors the tendency was between that of PbO vapors and that of PbCl$_{2}$ or SnCl$_{4}$. To restrain the discharged amount of hazardous metallic species, the coagulation should be restrained, the number concentration and the size of pre-existing fly ash particles should be increased, and the temperature drop rate of combustion gas should be kept low.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.5-12
• /
• 2015

According to the analysis of special medical examination and work environment monitoring data, the rate of C1 and D1 on noise hazard exceeded 90 % among those of total hazardous factors. The rate of company exceeding noise exposure limit was also more than 90 %. The analysis result shows that main ages diagnosed with C1 and D1 was age of 50s. The majority scale company having workers diagnosed with C1 and D1 was the companies employing 5~49 workers. Types of industries which have a large number of companies exceeding noise exposure limit were automobile and trailer manufacturing, metal processing industry and primary metal manufacturing. A large number of work processes exceeding noise exposure limit were forming and processing work, cutting and bending work and grinding. To reduce the number of company exceeding noise exposure limit, the reduction counterplan should be focused on the type of industry and the work process which exceeded noise exposure limit frequently. However, the reduction counterplan is preemptively necessary to the type of industry and the work process which exceeded noise exposure limit consecutively if the purpose of reduction counterplan is not to merely reduce the number of company exceeding noise exposure limit but to abate workers' suffering from noise.