• The Plant Pathology Journal
• /
• v.27 no.3
• /
• pp.266-271
• /
• 2011

Physicochemical characteristics and heavy metal content of soils located along the drainage way of an abandoned mine at Busan, Korea ($35^{\circ}31'N$, $129^{\circ}22'E$) (contaminated soil; CS) and uncontaminated soils (50-70 m apart from the drainage way) (NS) were examined. Growth of tomato plants (Solanum lycopersicom cv. Rutgers) in CS and NS, development of the root-knot nematode (Meloidogyne incognita) as root-knot gall formation on tomato plants, and non-parasitic nematode populations in soil were also examined. Growth of tomato plants, root-knot gall formation, and non-parasitic nematode populations were significantly reduced in CS with higher As content, lower pH, higher electrical conductivity (EC), and lower available phosphate (av. $P_2O_5$) than in NS. None of the other physicochemical characters examined differed significantly between CS and NS (low and no significance) and were above or below the critical levels detrimental to plant growth and nematode development, suggesting that As may be the primary hazardous heavy metal in CS. The toxicity of As might be enhanced at low pH in CS because exchangeable forms of some heavy metals increase with the decrease of soil pH. The heavy metals, especially As, may have contributed to increasing EC and decreasing av. $P_2O_5$. Therefore, the effects of mine drainage contamination from the abandoned mine were derived primarily from contamination by heavy metals such as As. These may have been enhanced in toxicity (solubility) by the lowered pH, increased soil salinity (EC) and decreased av. $P_2O_5$. Our results suggest synergistic adverse effects on the plant and the nematode by decreasing osmotic potential and nutrient availability.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.680-686
• /
• 2002

The solidification/stabilization mechanism of each cementious material was investigated. It was found that when $C_3$S was hydrated , the Pb element could be transferred to the insoluble Ca[Pb(OH)$_3$.$H_2O$]$_2$and the Cr element to the CaCr $O_4$$H_2O$. The addition of heavy metal tends to delay the hydration until initial 7 days. The Pb element as also delayed the hydration and the Cr element was substituted for the ettringite. On the occasion of the hydration of $C_4$ $A_3$ $S^{S}$, the Pb and Cr ions were solidified/stabilized by the substitution into the ettringite and/or monosulfate. Leaching of the Pb, Cr and Zn elements in the solidified material was extremely little, indicating that heavy metals were effectively solidified/stabilized in the hydrated cementious materials. Solidification/stabilization of heavy metal ions in the industrial wastes such as the STS, BF and COREX sludge was investigated. In case of the mixing ratio of cement and slag was 3 : 7, leaching of hazardous heavy metal ions was very little, indications that the solidification and stabilization was very successful.l.

• Journal of Preventive Medicine and Public Health
• /
• v.13 no.1
• /
• pp.3-12
• /
• 1980

Certain heavy metals which may lead peoples to poisonous status are widely used in industry and their uses have been increasing along with rapid industrialization of this country. Such an increasement of metal uses aggravates the status of environmental pollution affecting foodstuffs which are the most important life supporting factor of animal and humanbeing. Concerning the safety measures to minimize food-borne transmission of such hazardous metals, surveillance is the backbone of them and probably more so with a potential problem such as intoxication. Theoretically, this surveillance should include the determination of levels of heavy metal toxicants in foods, the determination of food consumption patterns and typical total diet, and the estimation of total load of the metal contaminant from all sources of exposure including air, water, and occupational sources. In recent year, actually, such estimates on the total daily intake of some heavy metals from foods have been made in several developed countries and a wide variation of date by season, locality, and research method was recognized. Also in this country, this kind of research data is vitally needed to make up for the serious shortage or lack of references to estimate the total amount of heavy metal intake of the people. In this study, a modification model for estimation of the total daily intake of cadmium copper, nickel, zinc, and lead through foods was applied and concentrations of the above metals in crops cultivated in this country were measured with atomic absorption spectro photometer to get the following results. 1. Level of heavy metal concentration in crops Generally, the levels of such metals in essential crops such as rice, cucumber, radish. chinese cabbage, apple, pear, grape, and orange are similar or lower than those in Japan and other developed countries. By the way, a striking result on cadmium concentration was increasement of its concentration in rice from $0{\sim}0.035ppm$ in 1970 to 0.11ppm in this study. However, the value is still far below the. Japanese Permissible Lebel of 1.0ppm. 2. Estimation of total daily intake per capita from foods A new model for estimation was devised utilizing levels of metal concentration in foods, amount of food consumed, and other food factors. Based on the above method, the daily intake of cadmium was estimated to be $70.53{\mu}g/man/day$ in average which was as high as the Limit Value of ILO/WHO(up to $71.4{\mu}g/man/day$). Also, 3.89mg of Zinc, 1.65mg of cuppor, 0.32mg of lead were given as the total daily intake per capita by this research. 3. Efficacy of washing or skinning to decrease the amount of metals in crops After washing the crops sufficiently with commercial linear alkylate sulfonate, the concentration of heavy metals could be reduced to $50{\sim}80%$ showing decreasement rate of $20{\sim}50%$. Also, after skinning the fruits, decreasement rate of the heavy metal concentration shelved $0{\sim}50%$.

• Journal of Convergence for Information Technology
• /
• v.10 no.12
• /
• pp.208-215
• /
• 2020

The purpose of this study was to access the effects of detoxification of hair by SUKI(silver tools). The subjects of this study participated 26 persons(EG 13 and CG 13), Experimental group was performed SUKI programs combined with scalp and hair for two times per week, during 8 weeks. The results was of comparison of variations in each groups showed that there was a significant difference(6items) in the experimental group(p<.05). But 2items(Pb, Cs) was not showed it. Among the hazardous heavy metals in research, Al, Ba and Hg showed the greatest reduction rate of difference. Thus, the using of the SUKI tool has been shown to affect some heavy metal emissions (p<.05). In conclusion, it is thought that it can be used as basic data for heavy metal discharge of scalp through continuous research in the future.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.213-217
• /
• 2008

The objective of this research is to investigate the leaching characteristics of unregulated heavy metals such as Ni, Zn, Ba, Be, Sb, Se, V in specified waste. 108 waste samples which were taken from the representative facilities emitting hazardous substances, were analyzed. The rate of leaching of heavy metal was measured using an official test method. From the results, wastewater treatment sludge and dust contained much Ni, and Zn was detected in all samples. Dust and waste catalyst producted from petroleum-refining process tended to reveal V in high concentration. Ba, Be, Sb, Se showed low concentration, but require additional analyses of waste generated at different industries.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.3
• /
• pp.223-228
• /
• 2002

In addition to supplying the essential elements, Ca and S, phosphogypsum can have profound effect on both the physical and chemical properties of certain soils. However, no widespread use of by-product phosphogypsum will be made unless such uses pose no threat to the public health and soil contamination. In this study, the extractability of As, Cd, Cu, and Pb with water and DTPA solution from phosphogypsum samples of pH 3, 5, and 7 were investigated to estimate the availability of those metals. Contents of water extractable metals in ohosphogypsum were less than 5 mg/kg for all the heavy metals investigated. The extractability of metals in DTPA solution was not quite different but a little higher in comparison to the water extraction. And the extractability was decreased as the pH of phosphogypsum increased. In the phosphogypsum of pH 7, amounts of water extractable metals were nearly zero. There was no significant difference in the amount of extractable metals during the extraction period of 5 weeks. The length of extraction time did not affect heavy metal extractability. Therefore there may be small fractions of easily soluble or extractable forms of metals in the phosphogypsum and most of the metals would be present in very insoluble forms. These results suggest that the application of phosphogypsum at appropriate rates on agricultural lands appears of no concern in terms of hazardous element contamination in soil.

• Korean Journal of Food Science and Technology
• /
• v.7 no.1
• /
• pp.1-6
• /
• 1975

The changes of heavy metal amounts (Sn, Pb and Fe) in the Commercial white peach can between lacquered and plain can were investigated according to storage period which indicated as follows. 1. Lacquered and plain can, both of can got on increasing on all of heavy metal with expanding storage period. 2. Lacquered can showed that the heavy metal were on the decreased than plain can, while amounts of tin was considerably decreased. 3. Amounts of iron was proportionally increased with the increasing of detinning amounts. 4. Amounts of hazardous metal in all of the 6 commercial products were not reached at harmfull level of Korean food sanitation law.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.133-144
• /
• 2022

Fast-paced industrial and agricultural development generates large quantities of hazardous heavy metals (HMs), which are extremely damaging to individuals and the environment. Research in both academia and industry has been spurred by the need for HMs to be removed from water bodies. Advanced materials are being developed to replace existing water purification technologies or to introduce cutting-edge solutions that solve challenges such as cost efficacy, easy production, diverse metal removal, and regenerability. Water treatment industries are increasingly interested in activated carbon because of its high adsorption capacity for HMs adsorption. Furthermore, because of its huge surface area, abundant functional groups on surface, and optimal pore diameter, the modified activated carbon has the potential to be used as an efficient adsorbent. Metal-organic frameworks (MOFs), a novel organic-inorganic hybrid porous materials, sparked an interest in the elimination of HMs via adsorption. This is due to the their highly porous nature, large surface area, abundance of exposed adsorptive sites, and post-synthetic modification (PSM) ability. This review introduces PSM methods for MOFs, chemical modification of activated carbons (ACs), and current advancements in the elimination of Pb²⁺, Hg²⁺, and Cd²⁺ ions from water using modified MOFs and ACs via adsorption.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.233-243
• /
• 2021

Photovoltaic panels are hazardous electronic waste that has heavy metal as one of the hazardous components. Each year, hazardous electronic waste is increasing worldwide and every heavy rainfall exposes the photovoltaic panel to become the source of heavy metal soil contamination. the development needs a monitoring technology for this hazardous exposure. this research use relationships between SAR temporal baseline and coherence of Sentinel-1 satellite to detected photovoltaic panel. Also, the photovoltaic plant detection tested using the difference between that photovoltaic panel and the other difference surface of coherence. The author tested the photovoltaic panel and its environment to calculate differences in coherence relationships. As a result of the experiment, the coherence of the photovoltaic panel, which is assumed to be a permanent scatterer, shows a bias that is biased toward a median value of 0.53 with a distribution of 0.50 to 0.65. Therefore, further research is needed to improve errors that may occur during processing. Additionally, the author found that the change detection using a temporal baseline is possible as the rate of reduction of coherence of photovoltaic panels differs from those of artificial objects such as buildings. This result could be an efficient way to continuously monitor regardless of weather conditions, which was a limitation of the existing optical satellite image-based photovoltaic panel detection research and to understand the spatial distribution in situations such as photovoltaic panel loss.

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.556-565
• /
• 2023

Fast industrial and agricultural expansion result in the production of heavy metal ions (HMIs). These are exceedingly hazardous to both humans and the environment, and the necessity to eliminate them from aqueous systems prompts the development of novel materials. In the present study, a UIO-66 (COOH)₂ metal-organic framework (MOF) containing free carboxylic acid groups was post-synthetically modified with L-glutamic acid via the solid-solid reaction route. Pristine and glutamic acid-treated MOF materials were characterized in detail using several physicochemical techniques. Single-ion batch adsorption studies of Pb(II) and Hg(II) ions were carried out using pristine as well as amino acid-modified MOFs. We further examined parameters that influence removal efficiency, such as the initial concentration and contact time. The bare MOF had a higher ion adsorption capacity for Pb(II) (261.87 mg/g) than for Hg(II) ions (10.54 mg/g) at an initial concentration of 150 ppm. In contrast, an increased Hg(II) ion adsorption capacity was observed for the glutamic acid-modified MOF (80.6 mg/g) as compared to the bare MOF. The Hg(II) ion adsorption capacity increased by almost 87% after modification with glutamic acid. Fitting results of isotherm and kinetic data models indicated that the adsorption of Pb(II) on both pristine and glutamic acid-modified MOFs was due to surface complexation of Pb(II) ions with available -COOH groups (pyromellitic acid). Adsorption of Hg(II) on the glutamic acid-modified MOF was attributed to chelation, in which glutamic acid grafted onto the surface of the MOF formed chelates with Hg(II) ions.