• 전기학회논문지
• /
• 제67권12호
• /
• pp.1619-1625
• /
• 2018

Portable electronic devices secondary batteries can cause fire and explosion due to micro-current change in addition to the situation of short-circuit inrush current, safety can not be secured with a general operation limited current fuse. Therefore, in secondary battery, it is necessary for the protector to satisfy both the limit current type operation in the open-short-circuit inrush current and the current detection operation characteristic in the micro current change situation and for this operation, a fuse for the current detection type secondary battery protection circuit can be applied. The purpose of this study is to design a protection device that operates stably in the hazardous situation of small capacity secondary battery for portable electronic devices through the design of low melting fuse elements alloy of sensing type fuse and secures stability in abnormal current state. As a result of the experiment, I-T and V-T operation characteristics are satisfied in a the design of the alloy of the current sensing type self-contained low melting point fuse and the resistance of the heating resistor. It is confirmed that it can prevent accidents of short circuit over-current and micro current change of secondary battery.

• 한국항공운항학회지
• /
• 제12권3호
• /
• pp.65-85
• /
• 2004

Circling to land is a relatively dangerous maneuver. It contains the worst elements of IFR flight. There is a minimum obstruction clearance, a limited space in which to maneuver, an absence of visual reference, and trying to keep the runway in sight while preparing to land. At night it is quite a bit more than dangerous. The required continuous turn in marginal conditions that keeps the airport in sight is hazardous. Therefore, this paper proposes an application of GNSS to circling approach to reduce or remove chances of accidents which may occur under such unfavorable flight conditions. The study reviews relevant documents published by ICAO and FAA and provides scenarios for non-precision and precision approaches and circling approach based on the GNSS for Kimhae airport. Also requirements for the ground facility design are studied and provided.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.64-74
• /
• 2007

The continuous chip in turning operation deteriorates precision of workpiece and causes a hazardous condition to operator. Thus the chip form control becomes a very important task for reliable machining process. So, grooved chip breaker is widely used to obtain reliable discontinuous chip. However, developing new cutting insert having chip breaker takes long time and needs lots of research expense due to a couple of processes such as forming, sintering, grinding and coating of product and many different evaluation tests. In this paper, performance of commercial chip breaker is evaluated with neural network which is learned with a back propagation algorithm. For the evaluation, several important elements(depth of cut, land, breadth, radius) which directly influence the chip formation were chosen among commercial chip breakers and were used as input values of neural network. With the results of these input values, the performance evaluation method was developed and applied that method to the commercial tools.

• Environmental Analysis Health and Toxicology
• /
• 제18권3호
• /
• pp.183-191
• /
• 2003

Although the variety and quantities of chemicals used have been increasing, no management strategies have been developed for these chemicals in our country. Therefore, it is important to identify the hazardous characteristics of chemicals and establish reasonable and effective management plans for them. However, because insufficient resources are available to evaluate all aspects of many varieties of chemicals, studies on suitable chemical ranking and scoring (CRS) system should be performed to ensure effective screening of priority chemicals.. In addition, because most CRS systems have their own goals, it is impossible for only one generic system to be consistent with all the uses that have been developed. Therefore, priority systems should be developed with specific and clearly defined purposes in our nation. In this study, we investigated and discussed exist-ing CRS systems, and proposed several elements and principles when designing CRS systems. First of all, the system should have clearly defined goals, keep neutral, and employ simple methods. In addition, researchers need to perform sensitivity analysis to find the main variables responsible for uncertainties and use the tiered approach to compose the effective management strategies for chemicals.

• 한국재난정보학회 논문집
• /
• 제16권2호
• /
• pp.374-382
• /
• 2020

연구목적: 최근 노후한 안전관리 미비 시설물의 구조적 결함으로 인한 건축물 및 시설물 붕괴사고 등이 발생하고 있다. 본 연구는 전시 공간 건축물의 위험징후를 분석하고 계측기술을 개발하기 위해 시지각적 요소를 갖춘 건축물 센서 모니터링을 위한 최적의 센서 위치를 결정하는 상시 모니터링 시스템 설치가이드라인을 개발하는 것을 목적으로 한다. 연구방법: 위험징후 계측 기기의 구성요소, 설치위치, 기기의 경보 기준, 관리 방안 등을 제시한다. 연구결과: 센서의 위치를 결정하고, 통일된 시지각을 갖춤으로서 분석을 위한 신호처리 기술을 확보하고, Test-bed 운영 통해서 센서 모니터링 기반의 최적 '위험징후 감지장치'를 구성하는 방안을 제시하였다. 결론: 본 연구의 결과는 전시 공간 건축물 붕괴로 발생할 수 있는 재난으로부터 대비하고, 안전관리 역량을 강화에 기여할 수 있다.

• 한국수산과학회지
• /
• 제49권1호
• /
• pp.7-12
• /
• 2016

Total mercury (TM) is a hazardous element that is of particular concern to human health. Due to the diversity of dietary habits among fishes, tissue-specific analysis of hazardous elements is necessary. In this study, the tissue-specific TM in cultured fish was analyzed to conduct risk assessment. The highest concentrations of TM were found in the farmed marine fish Pagrus major (0.111 mg/kg) and in the farmed freshwater fish Channa argus (0.162 mg/kg). TM concentration was significantly correlated with total fish length (P<0.01). Significant differences in TM were found between three types of fish tissue, with the concentration in fish muscle being significantly higher than those of gill or liver (P<0.01). Moreover, the tissue-specific TM concentrations of farmed freshwater fish were significantly higher than those of farmed marine fish (P<0.01). According to the risk assessment, the TM body exposure rate of muscle and liver in cultured fishes ranged from 0.001 to 0.389% of the Provisional Tolerable Weekly Intake. Therefore, these results showing the tissue-specific TM contents of cultured fish could be useful to assess the health risks of Korean dietary habits.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제14권3호
• /
• pp.14-21
• /
• 2009

미국 환경법에 규정된 Imminent & Substantial Endangerment(ISE) 조항에 대한 정의, 결정 및 적용사례를 분석하였다. ISE는 행정권자가 현재의 환경오염상황이 인체에 급박하고 실질적인 위해를 가할 수 있는 오염으로 판단할 경우 오염책임자에게 대책을 강구하게 하는 환경오염 상황 및 환경법상의 조항으로 정의된다. 이때의 행정권자의 대책 요구는 권고, 행정명령, 민사소송, 형사소송 등 다양하게 이루어지며 모든 행정 집행 과정에 ISE가 언급된다. ISE의 판단을 위해서는 1) a possible ISE 2) because of actual or threatened release 3) of a hazardous substance 4) from a facility, 네 가지 요소에 대한 명확한 증거가 있어야 한다. 그러나 네 가지 요소에 대한 정의는 매우 광범위하며 유연성을 가지고 있어, ISE 판단은 행정권자의 충분한 자료 확보와 주관적인 판단에 따르는 것으로 나타났다. 또한 ISE 판단은 판단 주체에 따라 차이를 보이지만 공통적인 사항은 매우 상세한 현장조사 결과 및 과학적인 정황에 기인하고 있다. 미국내 ISE 행정명령에 대한 기본 문서 형태 및 내용은 규정되어 있지만 ISE 판단에 대한 구체적인 정량적 기준 및 방법은 정의되어 있지 않았다.

• 한국광물학회지
• /
• 제24권2호
• /
• pp.101-110
• /
• 2011

숯은 제조 및 활용과정에서 연소를 통해 함유된 성분들을 방출한다. 연소는 숯의 화학조성뿐만 아니라 숯의 표면 물성변화를 초래하고 다른 성분을 흡착하기 쉬운 상태로 변형시키기도 한다. 본 연구에서는 국내에서 시판되는 4종 숯에 대하여 화학적, 열적안정성과 중금속 및 유기유해물질의 거동 연구를 수행하였다. 상온에서 $400^{\circ}C$까지 열중량분석(TGA)과 시차주사열량계를 이용한 연소에 따른 중량변화와 관련된 물질거동 연구를 수행하였다. TGA 분석결과 대부분 시료에서 $200^{\circ}C$ 이전 약 10% 중량이 감소하였으며, $200^{\circ}C$ 이전에 잔류유기물과 가스상 물질이 소실되는 것을 알려준다. 열분석에 의한 질량 감소는 천연숯과 인공숯에서 다르게 측정되었다. 천연숯 K1, C1 에서는 $400^{\circ}C$까지의 가열 반응결과 약 15% 중량 감소가 있었으며, 인공숯 K2, C2의 경우 약 20%의 중량 감소가 있는 것으로 검출되었다. 가열에 의한 $400^{\circ}C$ 이하 중량감소는 주요 유기물과 VOC의 소설에 기인하는 것으로 나타났다. 화학조성분석에 근거한 X-선 회절분석을 실시하였다. 분석결과 첨가제인 Ba이 $Ba(NO_3)_2$ 및 $BaCO_3$ 등의 형태로 $NaNO_3$와 함께 숯에 다량 존재하는 것으로 분석되었다.

• 한국환경보건학회지
• /
• 제28권2호
• /
• pp.117-129
• /
• 2002

Concentration of welding fumes and their components is known to be hazardous to welder and adjacent worker. To determine the generation rates of metals in fumes, $CO_2$ flux cored arc welding on stainless steel was performed in well designed fume collection chamber. Variables were different products of flux cored wire(2 domestic products and 4 foreign products) and input energy(low-, optimal- , high input energy). Mass of welding fumes was determined by gravimetric method(NIOSH 0500 method), and 17 metals were analysed by inductively coupled plasm-atomic emission spectroscopy(NIOSH 7300 method). Flux cored wire tube and flux were analysed by scanning electron microscopy to determine their metal composition. 17 metals were classified by their generation rates. Generation rates of iron, manganese, potassium and sodium were all above 50mg/min at optimal input energy level. Generation rates of chromium and amorphous silica were 25~50mg/min. At 1~25mg/min level, nickel, titanium, molybdenum, and aluminum were included. Copper, zinc, calcium, lead, magnesium, lithium, and cobalt were generated below 1 mg/min. Generation rates of metal components in fumes were influenced by input energy, types of flux cored wire. Flux cored wire was consisted of outer shell tube and inner flux. Iron, chromium, and nickel were the major components of outer tube. Flux contained iron, chromium, nickel, potassium, sodium, silica, and manganese. The use of flux cored wire can increase the hazards by increasing the amounts of fumes formed relative to that of solid wire. The reason might be the direct transfer of elements from the flux, since the flux is fine power. Ratio of metals to the fume of flux cored wire was lower than that of solid wire because non-metal components of flux were transferred. Total metal content of fumes in flux cored arc welding was 47.4(24.3~57.2) percent that is much lower than that of solid wire, 75.9 percent. We found that generation rates of iron, manganese, chromium and nickel, all well known to cause work related disease to welder, increased more rapidly with increasing input energy than those of fumes. To reduce worker exposure to fumes and hazardous component at source, further research is needed to develop new welding filler materials that decrease both the amount of fumes and hazardous components.

• 한국농림기상학회지
• /
• 제3권2호
• /
• pp.81-87
• /
• 2001

쓰레기 매립지 침출수의 중금속과 유해성분을 자작 나무와 이태리포플러 묘목이 얼마나 흡수, 제거하는 지를 알아보기 위해서 침출수 원액, 50% 침출수, 25% 침출수 그리고 대조구 등 4개의 처리로 나누어서 관수하였다. 실험이 끝난 후에 뿌리, 줄기, 잎을 분쇄기로 분쇄하고 그 함량을 Inductively Coupled Plasma emission spectrometer(ICP)로 조사하였다. 위에서 살펴본 것과 같이 이태리 포플러와 자작나무 모두 쓰레기 매립지 침출수의 유해 중금속을 흡수할 수 있는 능력이 있어 매립지나 황폐지 같은 지역의 빠른 조림을 위해서 활용이 기대되는 수종임을 알 수 있다. 특히 토양의 알루미늄(AA),크롬(Cr), 철(Fe) 등의 오염이 문제가 되는 지역에 이들 수종을 식재하게 되면 뿌리를 통해서 이들 원소를 흡착, 흡수 할 수 있는 효과를 올릴 수 있다.