• Journal of Korean Home Economics Education Association
• /
• v.21 no.3
• /
• pp.111-122
• /
• 2009

This study assessed the levels of knowledge and behavior about food safety, the factors influencing them and the causal relationship between them. The data were collected from 297 high school students in Gyeongbuk region by the self-administered questionnaire. The questionnaire was composed of closed-end questions regarding each respondent's characteristics such as sex and grade, recognition on food safety, concern about hazardous elements towards foods and knowledge and behavior about food safety. The results of this study were as follows. Both levels of knowledge and behavior about food safety were not particularly high. The factors affecting the level of knowledge about food safety were mother's age and concern about hazardous elements towards foods. Grade, father's educational level, concern about hazardous elements towards foods, and the level of knowledge about food safety influenced the level of behavior about food safety. The results of the path analysis showed that grade and father's educational level directly affected the level of behavior about food safety. In addition, concern about hazardous elements towards foods had direct and indirect effect on the level of behavior about food safety On the other hand, the level of knowledge about food safety had an direct influence on the level of behavior about food safety.

• Journal of the Korean Institute of Gas
• /
• v.6 no.4 s.18
• /
• pp.53-58
• /
• 2002

In this research, the goal is to ascertain the potential danger when transporting hazardous material by considering the important elements that contribute to such situation, instead of relying on the quantitative risk assessment of fixed facilities. Also, this study will verify the social and personal risk according to damage zone limits, by applying the worst case scenario and the alternative scenario that occur during the transportation process. Moreover, it has selected the optimum transportation route for maximum safety. The result of this research could be used to construct a systematic emergency system that can minimize the damage from serious industrial accidents, by effectively decreasing the danger zone and forming a connection between the community, the society, and the industries according to such evaluations.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.212-221
• /
• 2018

Process safety incidents and loss events can be prevented if we identify and adequately take measures on process safety incident precursors in a timely manner. If we look into and take action against the process safety hazard factors causing the incident in the refinery and petrochemical plant, major process safety incidents can be prevented through eliminating or decreasing hazardous factors. We conducted a survey for the major process safety incident precursor to look specifically into the potential process safety hazardous factors of refineries and petrochemical plants in the Yeosu chemical complex. A self-assessment checklist, which was published by Center for Chemical Process Safety "Recognizing catastrophic incident warning signs in the process industry" on major incidents warning sign, was used for the survey. Through this survey, the major process safety incident leading indicators in the process industry were found by process safety management elements, and each site and/or facility can use these leading indicators for activities for process safety incident prevention. In addition, we proposed action items required to eliminate the root cause of those process safety incident leading indicators.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.5
• /
• pp.249-254
• /
• 2016

In this study, we investigated the main characteristics of off-gas generated from melting process and off-gas treatment system operation example to provide some primary data for commercial vitrification facility design. The purpose of vitrification facility operation is to treat hazardous materials in the radioactive wastes and harmful off-gas containing a variety of chemical species generated in the glass melting process. Constructing and operating vitrification facility essentially need to be licensed through safety analysis; it is very important to treat radionuclide and hazardous materials below the legal environment emissions regulation level. We must accurately understand the characteristics of off-gas and apply an appropriate off-gas treatment process accordingly. Thus, to design the appropriate off-gas treatment there must be a wide range of elements taken into account such as characteristics of waste and melter, regulation guidance of off-gas, characteristics of generated off-gas and off-gas treatment system performance assessment.

• Analytical Science and Technology
• /
• v.23 no.5
• /
• pp.485-491
• /
• 2010

A certified reference material (CRM) of KRISS 109-03-SSD was developed for the analysis of hazardous elements in soil. The target elements were As, Cd, Cr, Cu, Hg, Ni, Pb, Zn being regulated by the Soil Environment Conservation Act. Starting material was collected from tailing dump of an unworked tungsten mine at Sangdong (Gangwon-do, Korea). The starting material under-went through a series of fabricating process steps of screening, drying, grinding, sieving, blending, bottling, sterilization and was certified according to the ISO Guide 35. Isotope dilution-inductively coupled mass spectrometry (ID-ICP/MS) and instrumental neutron activation analysis (INAA) were used for the measurement. Homogeneity was tested according to ISO 13528 annex B. The certified values were determined using the results from two different methods or from two independent measurements using a method. Finally, certified values of seven elements of arsenic, cadmium, chromium, copper, lead, nickel and zinc were determined. Mercury did not satisfied the criteria of homogeneity and the result would be provided for information only, together with iron and tungsten. It was also studied, the extractable fraction of elements by aqua regia according to the ISO 11466 protocol being frequently studied for the purpose of environmental monitoring. It was performed as a inter-laboratory study by 6 laboratories of a public institute and universities. Standard deviation among the laboratories was much bigger than the uncertainty of the certified value. The result of inter-laboratory study on the extractable fraction will be provided for information, only.

• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.73-81
• /
• 2003

The Government presented improvement plans such as "Traffic Accident Frequent Point" and "Hazardous Roads" to reduce traffic accidents on the increase after 1980s. In case of the hazardous roads, they are expressed by grades which are marked by geometric elements such as width, radius, grade. sight distance. and other environmental factors. As each business for improving roads goes by only focusing on improvement of geometric elements, excessive expense can be invested too much nowadays causing economical waste. Therefore, as improvement plans approached by economic access are needed, this paper shows the cost-effective improvement of the business to keep safety related to traffic accident and economical waste. The hazardous roads which authorized by Gwang-ju National Road Preservation Office of Construction and Transportation Ministry in 1995 for business for improvement of roads, were investigated before 1999. First of all, estimating traffic accident models are presented by using existed data statistically. The models help to maximize traffic accident decrease through control of the presented factor. Secondly, optimum construction cost of improvement is presented to prevent overcapitalization. However, this paper is limited because it was difficult to sort the data with various areas and to approach various ways.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.1
• /
• pp.11-22
• /
• 2000

Polycyclic aromatic hydrocarbons(PAHs) have known as potentially hazardous air pollutants(HAPs0 to human health because of its carcinogenic and mutagenic behaviors. The purpose of this study was to determine the level of 6 PAHs(Fluoranthene, Pyrene, Benzo[a]anthracene, Chrysene, Benzo[b]fluoranthene, and Benzo[a]pyrene) as well as 10 inorganic elements(Cr, Na, K, Zn, Pb, Fe, Cu, Ti, Al and Cd) in the ambient PM-10. The total of 115 samples had been collected from February, 1996 to June, 1996 on quartz fiber by a PM-10 high volume air sampler near the Yong-Tong Apartment complexes. A statistical analysis was performed for the PAHs and inorganic elements data set using a principal component analysis in order to identify qualitatively the potential sources of PM-10. A total of 6 principal components were separated by intensive data pretrement and transformation processes, such as soil, refuse incineration, oil burning, coal burning, field burning, vehicle emission sources. The results showed that PAHs were associated with various burning activities like refuse and field burning, coal burning, and oil burning emissions in the study area. These derived sources were well matched with the previously known source profiles in terms of compositonal order and level of measured species. The combination data set consisted of both organic and inorganic species might provide more powerful source signature and might increase the number of potentially derived sources than PAHs or inorganic data alone.

• KIEAE Journal
• /
• v.5 no.4
• /
• pp.9-16
• /
• 2005

The purpose of this study is to analyze the safety issues with regard to architectural elements in housing. Causes of accidents and threats to health are reviewed for 'safety' aspects. Threats to health tend to draw more attention due to recent increase of SHS and its public perceptions. The majority of victims by accidents in residential houses are on juveniles aged under 14 in bathrooms and living rooms. Non-slip finish materials are recommended to floors for access and circulation and protective pads to furniture edges. Colored glass may increase the safety of the windows in the living room. Handles and non-slip mats will be a good addition for the safety. Human scale design of the kitchen system is mandatory and appropriate size of storages for hazardous equipment are to be provided. Passive air ventilation for better air quality by dwellers in residence is occasionally used whereas large-scale apartments provide mechanical ventilation to supplement the volume of fresh air. Since the internal air quality is proved one of the major causes of atopic and respiratory diseases, steady effort to achive better air quality utilizing appropriate materials, plants and equipment is mandatory. Frequent cleaning and the use of anti-fungus materials are necessary because House Dust Mites are believed to be one of main causes of such diseases.

• Safety and Health at Work
• /
• v.10 no.4
• /
• pp.409-419
• /
• 2019

Although the rare earth elements (REEs) recycling industry is expected to increase worldwide in hightech industry, regulations for worker safety have yet to be established. This study was conducted to understand the potential hazard/risk of REE recycling and to support the establishment of regulations or standards. We review the extensive literature on the toxicology, occupational safety, and health issues, and epidemiological surveys related to the REEs, and propose suitable management measures. REE recycling has four key steps such as collection, dismantling, separation, and processing. In these processes, hazardous substances, such as REEs-containing dust, metals, and chemicals, were used or occurred, including the risk of ignition and explosion, and the workers can be easily exposed to them. In addition, skin irritation and toxicities for respiratory, nervous, and cardiovascular systems with the liver toxicity were reported; however, more supplementary data are needed, owing to incompleteness. Therefore, monitoring systems concerning health, environmental impacts, and safety need to be established, based on additional research studies. It is also necessary to develop innovative and environment-friendly recycling technologies, analytical methods, and biomarkers with government support. Through these efforts, the occupational safety and health status will be improved, along with the establishment of advanced REE recycling industry.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.427-432
• /
• 2018

High-capacity secondary batteries can cause explosion hazards owing to microcurrent variations or current surges that occur in short circuits. Consequently, complete safety cannot be achieved with general protection that is limited to a mere current fuse. Hence, in the case of secondary batteries, it is necessary for the protector to limit the inrush current in a short circuit, and to detect the current during microcurrent variations. To serve this purpose, a fuse can be employed for the secondary battery protection circuit with current detection. This study aims at designing a protection device that can stably operate in the hazardous circumstances associated with high-capacity secondary batteries. To achieve the said objective, a detecting fuse was designed from an alloy of low melting point elements for securing stability in abnormal current states. Experimental results show that the operating I-T and V-T characteristic constraints can be satisfied by employing the proposed current detecting self-contained low melting point fuse, and through the resistance of the heating resistor. These results thus verify that the proposed protection device can prevent the hazards of short circuit current surges and microcurrent variations of secondary batteries.