• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.31-39
• /
• 1994

In this study, image processing were performed to recognize the shape of objects and find its center coordinate and direction to grisp the objects by the robot automatically. The proposed methods could be applied to objects even if light is reflected, and to identify the insides and outsides of objects by using the photo sensor and the difference of surface conditions. Also image segmentation is performed to the objects close to each other. These image processing methods will be increased the safety of operators by the automation of dangerous and hazardous machine works.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.235.2-236
• /
• 2002

The alkylphenols, chlorophenols and bisphenol A were determined by gas chromatography/mass spectrometry-selected ion monitoring mode followed by three work-up methods for comparison: EPA method, isoBOC derivatization method and TBDMS derivatization method. Eleven phenols in water samples were extracted with dichloromethane. (omitted)

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.10-15
• /
• 2010

The performance analysis of water systems is very important to urban disaster mitigation. It will benefit the task of preparedness and emergency response through a more practical and more quantitative approach. In this research work, an overview of hydraulics of water system has been provided. A methodology for such implementation based on scenario simulation and hydraulic analysis has been developed. The water system of Taipei Water Department was selected as a test bed for case study. Its serviceability following a major earthquake around Taipei metropolitan area has been quantified.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.129-133
• /
• 2000

Vapor oil fer radiator fm press in heat exchangers of air conditioners is carefully considered as the cooling performance can be affected by the residual vapor oil on the surface of radiator fin after fin press working. In this work, vapor oil for radiator fin press was developed in consideration of several properties such as physical characteristics, the rate of volatility, hazardous properties and material compatibility. In addition, it was confirmed that radiator fin press workability adopting the vapor oil and the cooling performance of air conditioner using the radiator fin were good.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.1
• /
• pp.12-18
• /
• 2023

Objectives: Personal protective equipment (PPE) is an essential means for protecting workers against hazardous agents or risks that threaten their safety and health. Governmental organizations related to safety and health in the workplace regulate the PPE rules to protect workers and to minimize damage from hazardous agents. This study discussed current PPE rules overseen by the Korea Ministry of Environment and explores future perspectives on the matter. Methods: This study was based on a review of PPE regulations with which every stakeholder should comply in the workplace. Both South Korean regulations enforced by the Ministry of Employment and Labor and the Ministry of Environment and cases from other countries were reviewed. Results: Regulations related to the PPE required for handling chemical substances in the workplace are enforced by the Occupational Safety and Health Act, Enforcement Decree, Enforcement Rules, and Notification of Protective Equipment Certification under the Ministry of Employment and Labor. The Ministry of Environment also regulates the PPE standards for 97 substances requiring preparation for accidents and adjustment of work conditions, but a recent amendment (partially amended on September 30, 2022) loosened some unreasonable or excessive provisions. It requires workers simply to carry or otherwise keep PPE handy instead of wearing it for some tasks in which hazardous chemicals are not handled directly. Conclusions: It is important to regularly review provisions that need to be improved or supplemented to help all stakeholders. Considerations should be also made to build a reasonable regulatory system that can induce more mature safety management in each workplace.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.166-174
• /
• 2018

Objectives: This study aimed to estimate the number and proportion of target workplaces for work environment monitoring and evaluate the implementation rate of work environment monitoring. Methods: A questionnaire survey was conducted by the Ministry of Employment and Labor between March and May 2017 among 96,295 manufacturing businesses with more than five employees. The response rate was 17.8%. Estimates of the number and proportion of target workplaces for work environment monitoring were calculated as follows: number of workplaces where work environment monitoring was performed in 2016 + exposure rate based on the questionnaire * number of workplaces where work environment monitoring was not conducted. Results: Of the 150,655 total manufacturing businesses with more than five employees, 63,146 are estimated to be subject to work environment monitoring, which accounted for 41.9% of the workplaces. It is estimated that 73.3% of the target workplaces performed work environment monitoring. The number of workers exposed to hazardous substances is estimated to be about 0.7~1.2 million. Conclusions: Information on the distribution of workplaces subject to work environment monitoring and the rate of implementation can be used as baseline information for management and evaluation of the effectiveness of the work environment monitoring system.

• Journal of Distribution Science
• /
• v.17 no.7
• /
• pp.65-76
• /
• 2019

Purpose - The purpose of this study is to investigate economical ventilation effectiveness to reduce hazardous materials exposure and damage of workers by analyzing exposure amount of noxious substances under various ventilation conditions of nail salon for indoor environments. Research design, data, and methodology - This study was carried out with cooperation of Nail shop located in SeongNam city to involve an analysis of the environmental impact indoor air quality, pollutant exposure and economical cost-effectiveness in the nail workplace. The hazardous substances were PM-10(Particulate Matter-10㎛), VOCs(Volatile Organic Compounds) and Formaldehyde, which are the major materials of nail workplace. Results - PM-10 is reduced by about 60% with air cleaner, forced artificial ventilation by 32%, and natural ventilation by about 12%. TVOCs and Formaldehyde showed similar efficiency (80~100%) after natural ventilation and ventilation after 60 minutes. The removal efficiencies of VOCs and formaldehyde were similar to those of natural ventilation and mechanical ventilation system. However, in case of dust, natural ventilation was reduced by artificial ventilation system due to inflow of external dust during natural ventilation. Conclusions - If the pollution degree of outdoor air is not high, air volume is high, and natural ventilation is performed when the air conditioning and heating system is not operated. Even at the end of the work, it keeps operating for 60 minutes to remove the pollutants generated. Results of this analysis demonstrated that the worker environment can be improved by adopting institutional legislation and guidelines for ventilation.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.9-16
• /
• 2009

Chemical products have had an favorable influence on our everyday life, and contributed very much to the development of human culture. According to the rapid change of industry and the development of scientific technique the using chemical products are increasing more and more. Chemical products can have any hazardous property such as flammability or explosiveness. There are occurring many accidents in the international trade due to the different classification and labelling of chemicals produced in various countries. The main purpose of this work is the development of global standard test methods for the chemicals, and the classification and labelling in building block approach by means of the basic technical data. Oxidizing solids, combustible solids, spontaneously combustible materials, water-prohibitive materials, flammable liquids, self-reactive materials and oxidizing liquids have been classification The first Experiment have tested Oxidizing solids of third five. The results have been classified according to the hazard material safety regulation and the UN regulation, and summarized in a data-base.

• Safety and Health at Work
• /
• v.5 no.3
• /
• pp.165-167
• /
• 2014

The Dutch construction industry has introduced a compulsory preemployment medical examination (PE-ME). Best-evidence contents related to specific job demands are, however, lacking and need to be gathered. After the identification of job demands and health problems in the construction industry (systematic literature search and expert meeting), specific job demands and related requirements were defined and instruments proposed. Finally, a work ability assessment was linked to the instruments' outcomes, resulting in the modular character of the developed PE-ME. Twenty-two specific job demands for all Dutch construction jobs were identified, including kneeling/squatting, working under time pressure, and exposure to hazardous substances. The next step was proposing self-report questions, screening questionnaires, clinical tests, and/or performance-based tests, leading to a work ability judgment. "Lifting/carrying" is described as an example. The new modular PE-ME enables a job-specific assessment of work ability to be made for more than 100 jobs in the Dutch construction industry.

• Industrial Engineering and Management Systems
• /
• v.15 no.4
• /
• pp.364-373
• /
• 2016

Disassembly is one of the important activities in treating with the product at the End of Life time (EOL). Disassembly is defined as a systematic technique in dividing the products into its constituent elements, segments, sub-assemblies, and other groups. We concern with a Fuzzy Disassembly Line Balancing Problem (FDLBP) with multiple objectives in this article that it needs to allocation of disassembly tasks to the ordered group of disassembly Work Stations. Tasks-processing times are fuzzy numbers with triangular membership functions. Four objectives are acquired that include: (1) Minimization of number of disassembly work stations; (2) Minimization of sum of idle time periods from all work stations by ensuring from similar idle time at any work-station; (3) Maximization of preference in removal the hazardous parts at the shortest possible time; and (4) Maximization of preference in removal the high-demand parts before low-demand parts. This suggested model was initially solved by GAMS software and then using Genetic Algorithm (GA) in MATLAB software. This model has been utilized to balance automotive engine disassembly line in fuzzy environment. The fuzzy results derived from two software programs have been compared by ranking technique using mean and fuzzy dispersion with each other. The result of this comparison shows that genetic algorithm and solving it by MATLAB may be assumed as an efficient solution and effective algorithm to solve FDLBP in terms of quality of solution and determination of optimal sequence.