• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
• /
• pp.216-220
• /
• 1998

Experimental studies were carried out to investigate water diffusion in unsaturated compacted bentonite for a landfill of hazardous wastes. Water content distributions were measured and water diffusion coefficients were determined when the dry densities of compacted bentonite were in the range of 1.4 - 1.8 g/㎤. Resaturation times were also calculated to analyze the ability of the compacted bentonite to retard water movement. The results obtained were as follows: Diffusion model described properly the water migration in unsaturated compacted bentonite. Water diffusion coefficients ranged from 4.30$\times$10$^{-6}$ $\textrm{cm}^2$/sec to 1.93$\times$10$^{-6}$ $\textrm{cm}^2$/sec, and decreased with increasing the dry density. The dry density of compacted bentonite was found to be an important factor to control the resaturation time by water. This study suggests that the domestic compacted bentonite should be a good barrier material against water movement in a landfill of hazardous wastes.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1997년도 총회 및 춘계 학술발표회 논문집
• /
• pp.105-111
• /
• 1997

환경에 관한 지식의 증가와 더불어 환경오염을 적극적으로 해결하기 위한 새로운 연구들은 국경을 초월하고 있다 특히, 미국을 비롯한 여러 환경고도기술국가들속의 실험실의 주역들은 ＜환경 미생물＞을 이용한 제어연구에 엄청난 자본과 심혈을 바치고 있다. 실제로 미국 EPA에 의해 이미 유해유기화합물로 규정된 수많은 물질들이 이른바 환경미생물을 이용한 생물학적인 처리를 통해서, 이산화탄소와 물 및 메탄가스등의 무해한 무기화합물로 변환시킬 수 있음이 이미 확증된 바 있다. 아무리 많은 환경미생물들이라 할지라도 그 미생물 군들의 적절한 선택과, 대사작용이 최상의 상태로 유지될 수만 있다면, 환경오염물질들의 생물학적 처리는 개선된 최신방법중의 하나가 될 것이다. 또 이와 같은 미생물을 이용한 각종 처리방법 및 기작의 신개발은 21세기 환경오염문제 해결에 <마스터키> 역할을 감당해 나갈 것으로 기대된다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.159-162
• /
• 2005

In this paper, we report a novel technique for the manufacture of polymeric bar-coded strips having diverse characteristics such as sensing with biocatalysts using a microfluidic platform and 'on the fly' photopolymerization. This method is a very simple, cost-effective means for mass production, and diverse materials sensitive to hazardous environments such as enzymes, DNA, or antigens are expected to be immobilized stably, as the fabrication process does not need any hazardous environments. On the basis of this technology, we fabricated enzyme-immobilized barcoded strip for multiple bio-analysis.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.381-386
• /
• 2001

The dust generated from the electric arc furnace steel making process is classified as hazardous material by Korean Environmental Protection Acts, mainly because of the existence of water teachable Pb, Zn and Cd. Thus the treatment of EAF dust is being carried out to fulfill both the environmental aspect and recovery of valuable metals. To establish the proper process for recovering the valuable metals (Fe, Zn, Pb and Cd) and producing the non-toxic slag from EAF dust, using RAPID-10 system, feasibility study have been carried out. To find out the scale-up factor for designing the commercial scale EAF dust treatment process(capacity 50,000 ton EAF dust per year) entitled RAPID-50 system. The design and construction of RAPID-50 (RIST Arc Plasma Industrial Device) system for treating 50,000 ton of EAF dust per year is now undergoing. Overall plan for treating EAF dust generated in KOREA will be setup after successful operation (December, 2002) of RAPID-50 system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1540-1545
• /
• 2007

In these days, many kinds of tank car such as Oil tank car, Asphalt tank car, Sulfuric Acid tank car and Propylene tank car are used for carrying hazardous materials. Although they have a lot of dangerous possibilities when they meet with accidents examples of collisions and derailments there are not prescribed methods or standards for structural analysis using FEM. In this study, the structural stress analysis for an Asphalt tank car(Non-pressurized tank) and a Propylene tank car(Pressurized tank) was performed using the FEM refer to the test method in JIS E 7102(Design Methods for Tanks of Tank Cars). And then we suggested the tank car analysis procedures and considered the results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1227-1232
• /
• 2007

The objective of this study is to develop qualification analysis preliminary frame for railway personal injury accident. In this research, we develop accident scenarios to analyze systematically and evaluate quantitatively fatality accident scenarios for railway personal. The accident scenario analysis first identifies the hazardous events and explains the hazardous conditions that surround the accident and cause railway accidents. This method includes a feasibility test, a clustering process and a pattering process for a clearer understanding of the accident situation. Since this method enables an accident scenario analysis to be performed systematically as well as objectively, this method is useful in building better accident prevention strategies. Therefore, this study could serve to reduce railway accidents and could be an effective tool for a hazard analysis.

• 한국식품위생안전성학회지
• /
• 제26권2호
• /
• pp.171-181
• /
• 2011

Though food safety efforts of the government has been increasing, but the health hazards resulting from food does not stop and thus increases consumers' anxiety and distrust of government. For more reliable safety management, developing analysis and intake measurement methods and strengthening regulatory control with strict criteria is necessary. In addition, as not only the known hazards by now, but also unknown but obvious hazards are simultaneously ongoing in current environments, the unified risk management and health assessment for food, health food and medicines from the media is critical. As risks and damage to health may show up after a long time after exposure, preventive measures and strategies for safety control is also needed.

• 한국정보통신학회논문지
• /
• 제8권1호
• /
• pp.28-33
• /
• 2004

풍속 및 바람 방향의 급격한 변화에 의한 기상위험 현상을 탐지하기 위해서는 공간상에서 풍속의 변화정도를 측정하는 것이 매우 중요하다. 이러한 기상현상들에서 전형적으로 내재된 높은 풍속의 측정을 위해서는 높은 PRF를 갖는 레이다를 필요로 한다. 그러나 공간상의 풍속의 변화정도를 예측하는데 있어서 이러한 큰 풍속의 절대적인 측정값이 꼭 필요한 것은 아니다. 따라서 본 논문에서는 실제적인 측면에서 매우 유용한 낮은 PRF를 갖는 레이다를 이용하여 풍속의 공간 변화율을 얻는 방법을 제안하였다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.298-301
• /
• 2004

European Union Member States shall ensure that, from 1 July 2006, new electrical and electronic equipment put on the market does not contain mercury, cadmium, lead, hexavalent chromium, polybrominated biphenyls(PBB) or polybrominated diphenyl ethers(PBDE) (by Directive 2002/95/EC of The European Parliament and the Council of 27 january, 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment ). So, It is important to develop lead free solder and to assure the reliability of appliance. But lead free solder(i.e. Sn-3Ag-0.5Cu) have some problems such as lift off, whisker, migration and crack, etc. In this paper we discuss the reliability assurance method in lead free solder and appliance.

• 공업화학
• /
• 제3권2호
• /
• pp.207-212
• /
• 1992

Main disposal technology for industrial wasites in Korea has been landfilling, however, this is encountering serious problems such as the lack of landfill sites and objections of residents. Incineration, therefore, has become a final solution for this dilema. Various kinds of air pollutants generation are possible because of the variety of types and compositions of wastes generated in industry. In this paper, air pollutants produced while incinerating hazardous industrial wastes are discussed and some control technologies are surveryed with the purpose of optimal design of incinerators and emission reduction. From this initial stage of incinerator utilization, low-emission type should be developed and applied and intensive research on pollutant generation due to waste incineration and advanced control technologies should be also performed.