• Journal of Food Hygiene and Safety
• /
• v.15 no.4
• /
• pp.324-327
• /
• 2000

The analysis of hazardous heavy metals, such as Pb, Cd and As, was conducted from the porcelain dinnerwares. Total 374 samples of those products in the domestic market were purchased for the study. All the samples were extracted by 4% acetic acid solution, followed by the analysis with AAS(Atomic Absorption Spectroscopy). As a result, Pb and As were detected maximum 8.63$\mu\textrm{g}$/ml, 2.58 ng/ml, respectively. Cd was fecund in a sample as 0.10$\mu\textrm{g}$/ml.

• Journal of Sasang Constitutional Medicine
• /
• v.22 no.3
• /
• pp.132-140
• /
• 2010

1. Objective: To compare the contents and transfer rate of hazardous substances in crude, washing solution, crude after washing, decoction and remnant after boiling. 2. Methods: The heavy metal contents of each step were measured by inductively coupled plasma mass spectrometer (ICP-MS) and mercury analyzer (MA-2). In order to analyze pesticides in each sample we used simultaneous multi-residue analysis of pesticides by GC/ECD, which was followed by GC/MSD analysis to confirm the identity of the detected pesticide in each sample. In addition, the contents of sulfur dioxide (SO2) were performed by Monier-Williams distillation method. 3. Results: 1) Contents (mg/kg) of heavy metals in decoction of all herbal medicine prescriptions were not detected. 2) Transfer rates (%) of heavy metals from crude to remnant were As (83.3%), Cd (100.0%), Pb (182.6%) and Hg (100.0%). 3) Contents (mg/kg) of residual pesticides were not detected. 4) Transfer rate (%) of sulfur dioxide (SO2) from crude to remnant was 44.2%. 4. Conclusion: Our results showed that boiled herbal medicine prescriptions which we take is safe from the hazardous substances.

• Journal of Environmental Science International
• /
• v.13 no.7
• /
• pp.703-710
• /
• 2004

Petroleum refineries have been considered as an important emission source for atmospheric volatile hazardous air pollutants(HAPs). The emission source includes petroleum refinery processes and process equipment. The control strategy for volatile HAPs requires emission estimations of these pollutants. However, systematic methods of volatile HAPs emission from petroleum refineries have not yet been established. Accordingly, present study surveyed the estimation method of volatile HAPs emitted from the petroleum refinery processes and process equipment. The emission estimation methods for the petroleum refinery processes are applied for 11 petroleum refining facilities: fluidized catalytic cracking, thermal cracking, moving bed catalytic cracking, compressed engine, blowdown system, vacuum distilled column condensator, natural gas or distilled boiler, natural gas or distilled heater, oil boiler, oil heater and flare. Four emission estimation methods applied for the petroleum refinery process equipment are as follows: average emission factor approach, screening ranges approach, EPA correlation approach and unit-specific correlation approach. The process equipment for which emission factors are available are valves, pump seals, connectors, flanges and open-ended lines.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.4
• /
• pp.117-123
• /
• 2011

Lightning and switching surges propagating through the grounding conductors lead to transient overvoltages, and electronic circuits in information technology systems are very susceptible to damage or malfunction from the electrical surges. Surge damages or malfunctions of electrical and electronic equipment may be caused by potential rises. To solve these problems, it is very important to evaluate the ground surface potential rises and hazardous voltages such as touch and step voltages at or near the grounding systems energized by electrical surges. In this paper, the performance of grounding systems against the surge current containing high frequency components on the basis of the actual-sized tests is presented. The ground surface potential rises and hazardous voltages depending on impulse currents for vertical or horizontal grounding electrodes are measured and analyzed. Also the touch and step voltages caused by the impulse currents are investigated. As a result, the ground surface potential rises, the touch and step voltages near the grounding electrodes are raised and the conventional grounding impedances are increased as the front time of the injected impulse currents is getting faster.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.68-75
• /
• 2014

It is very important to classify explosion hazardous area (EHA) suitably and to use proper explosion-proof electric installations for facilities using flammable gases and liquids. In the past, various examples in the Notification of Ministry of Employment and Labor were referred to in classifying EHA. But, at present, many companies use the hypothetical volume in Korean Standards (KS). This study reviews the validity of EHA classification based on the hypothetical volume by comparing the calculated radii of EHA with those obtained by a consequence analysis program called PHAST and a mathematical approach in British Standards (BS). The radii of EHA by the hypothetical volume were found to be slightly larger than those by the other two methods. This was attributed to rather conservative uses of a safety factor(k) and a correction factor(f) for availability of ventilation in calculating the hypothetical volume. Since the differences are not so conspicuous, however, it is concluded that the hypothetical volume in KS is a valid means for the classification of EHA. This study also presents a table of the radii of EHA for easy reference by small-scale companies using city gas, C3-LPG and flammable liquid(toluene), respectively. The table consists of 25 leakage scenarios corresponding to combinations of 5 pipe(nozzle) sizes and 5 operating conditions for each flammable gas and liquid.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.801-810
• /
• 2013

A field study was conducted to evaluate air quality from gas stations with and without Stage II vapor recovery systems that are currently used to reduce VOCs. The THC and VOCs levels were monitored for the test at three locations (inside office, around refueling area, site boundary) from a total of five gas stations. The results showed a considerable reduction in THC concentration which ranged from 48.7% to 81.8% with and without the operation of the Stage II VRS. Acoording to our comparative analysis, BTEX and other 19 VOCs levels were also significantly reduced with Stage II vapor recovery systems.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.400-409
• /
• 2001

A method for the analysis of most common phthalate acid esters (9 secies) in biota samples by gas chromatography-mass spectrometry-selected ion monitoring mode is described. Phthalates in biota samples are extracted by organic solvent and purified by Florisil column. Phthalates are easily contaminated during extraction prodedure. Since the extraction and cleanup steps for biota samples generally are more complicate than those for water or sediment samples, we compared with contamination state of each sample work-up step. By applying this developed method, the overall recoveries ranged between 79 - 117% in biota sample which was spiked with standards. For phthalates used in this study, the quantitaive accuracy, elution pattern on Florisil column, and detection limits were also investigated.

• Analytical Science and Technology
• /
• v.27 no.4
• /
• pp.196-200
• /
• 2014

Currently nonaqueous titration method for the assay method using the hazardous reagent, mercury acetate for difemerine hydrochloride has been used in Korean Pharmaceutical Codex. We developed an alternative titration assay method by substituting the use of the hazardous reagent, mercury acetate to the use of less toxic ones like ethyl alcohol. The linearity of the calibration curves in the desired concentration range was good (r>0.999). Precision was less than 0.64%. Accuracy was obtained with recoveries in range of 99.10% and 99.71%. The developed assay could be expected to become valuable tools for revising the Korean Pharmaceutical Codex.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.229-237
• /
• 2008

Hazardous air pollutants emitted from the oil refinery plant were surveyed from 1993 US and 2005 Korean TRI data. Toluene, xylene, methanol, MTBE and n-hexane, relatively large in amount of fugitive emission, are considered as candidates of newly designated HAPs in Korea. The sealed oil pump, one of equipments among fugitive sources in the crude oil distillation tower was examined for the estimation of amounts of annual HAPs emissions according to several calculation methods using registered emission factors. Emission rates showed to be decreased with following calculation factors; average emission factor>pegged emission factor>concentration emission factor>correlation equation. Annual emission amounts of benzene, toluene, xylene. ethyl benzene and nhexane from the distillation tower were estimated and amounts of these HAPs calculated with TVOC concentrations obtained from LDAR program and correlation equations showed only 6% of those from using concentration factors.

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.342-346
• /
• 2015

Haloacetonitriles (HANs) are nitrogenous disinfection by-products (DBPs) that have been reported to have a higher toxicity than the other groups of DBPs. The adsorption process is mostly used to remove HANs in aqueous solutions. Functionalized composite materials tend to be effective adsorbents due to their hydrophobicity and specific adsorptive mechanism. In this study, the removal of dichloroacetonitrile (DCAN) from tap water by adsorption on thiol-functionalized mesoporous composites made from natural rubber (NR) and hexagonal mesoporous silica (HMS-SH) was investigated. Fourier-transform infrared spectroscopy (FTIR) results revealed that the thiol group of NR/HMS was covered with NR molecules. X-ray diffraction (XRD) analysis indicated an expansion of the hexagonal unit cell. Adsorption kinetic and isotherm models were used to determine the adsorption mechanisms and the experiments revealed that NR/HMS-SH had a higher DCAN adsorption capacity than powered activated carbon (PAC). NR/HMS-SH adsorption reached equilibrium after 12 hours and its adsorption kinetics fit well with a pseudo-second-order model. A linear model was found to fit well with the DCAN adsorption isotherm at a low concentration level.