• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.212-221
• /
• 2018

Process safety incidents and loss events can be prevented if we identify and adequately take measures on process safety incident precursors in a timely manner. If we look into and take action against the process safety hazard factors causing the incident in the refinery and petrochemical plant, major process safety incidents can be prevented through eliminating or decreasing hazardous factors. We conducted a survey for the major process safety incident precursor to look specifically into the potential process safety hazardous factors of refineries and petrochemical plants in the Yeosu chemical complex. A self-assessment checklist, which was published by Center for Chemical Process Safety "Recognizing catastrophic incident warning signs in the process industry" on major incidents warning sign, was used for the survey. Through this survey, the major process safety incident leading indicators in the process industry were found by process safety management elements, and each site and/or facility can use these leading indicators for activities for process safety incident prevention. In addition, we proposed action items required to eliminate the root cause of those process safety incident leading indicators.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.533-536
• /
• 2008

It is on increasing trend to employ H-rolled beams as main flexural members of bridges and of temporary structures owing to their handiness for construction, maintenance, and management. But in the case of applying H-rolled beams to bridges, maximum length of bridge span is around 20m. Therefore, to develop simplified steel-concrete composite bridge having long span using H-rolled beam needs new cross girder system at internal supports, optimization of bridge system without cross beams between supports and steel-concrete composite bridge deck. This study performs mechanical analysis of cross girder system for H-rolled beam steel-concrete composite bridge with long span and verifies its usefulness.

• Journal of the Korean Society of Safety
• /
• v.34 no.6
• /
• pp.38-49
• /
• 2019

While the overall industrial accident rate has been decreased, but those of the construction industry has not been. For safety management during the planning/design phase, which accounts for 45% of the cause of accident at the construction site, Design For Safety (DFS) was established to minimize a hazard and risk in 2016. Currently, DFS system has difficulty settling down in Korea due to the several reasons. So, this paper aims to propose to the Key Success Factor (KSF) and related action plan to improve DFS system. This study was conducted by following 2 steps: i) identification of problems on current DFS, and ii) proposal of KSF and following action plan for DFS. The DFS in Korea was compared with UK, Singapore, Australia, and US on 7 criteria (application target, execution period, change of design, collaboration among participants, expert participants, alternative review and decision support system). DFS was compared with other countries's system based on the identical criteria and the corresponding improvement measures were also proposed. The results of this study can be utilized to improve DFS system in various aspects.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.803-803
• /
• 2002

Several environmental problems have occurred and extremely affected throughout the East Asia region. Satellite imageries and spatial information have been used in the applications of environmental and natural hazard management for years. Sharing these data and resources in the community is considered as one of the optimal solution. It would consequently bring cost saving to all participated countries and eventually be beneficial to mankind as a whole. Encouraged by these factors, ASEAN＋3 Satellite Image Archive for Environmental Study project was submitted by Thailand in the 3rd Senior Official Meeting between ASEAN, China, Japan and Korea (SEOM＋3 Meeting) and approved by the SEOM＋3. The main objectives of this project are to share satellite images, information related to natural resources and environmental issues, and to provide data information services to all ASEAN＋3 countries. The proposed system is basically embedded by distributed system. The network of data users, data providers, and the center will be established using the Internet. User can access, navigate, display, and even download some archived contents. Its service site can be generally categorized into two parts, which are environmental related data archive and the Integrated satellite image catalogue. The extension of web based GIS is also planned for future development so that GIS users can conduct some preliminary analysis directly on line. This presentation will indicate scope of work, system, working scenario, and work plan of the project.

• Land and Housing Review
• /
• v.8 no.3
• /
• pp.201-210
• /
• 2017

Recently, as a part of measures against large-scale natural disasters in Korea, disaster prevention matters are strengthened in urban planning. With the introduction of the disaster vulnerability analysis system, plans for disaster prevention are being reinforced in urban planning. However, there are many problems to be solved at the stage of operation and practical application of the law. When disasters occur, we are focusing on response and recovery plans. Therefore, it is not enough to construct a comprehensive disaster prevention system to prevent disasters in advance. The established disaster prevention plan is difficult to plan management centered on disaster prevention due to factors such as economic efficiency, convenience, and comfort. This study is a basic study for supporting disaster prevention mitigation plan. For this purpose, the analysis of the actual situation of disaster prevention plan at home and abroad and improvement plan were derived. ased on these improvement plans, we have developed a method to apply the element technology of urban design to the test bed to reduce sediment disaster. The test bed was investigated and examined in the disaster hazard area of Busan and Seongnam city. And the defense technology is applied to the selected site, and the basis of the disaster prevention plan and design is proposed. If the proven techniques are reflected from the urban planning stage, it will be possible to contribute to the mitigation of sediment disaster caused by the city.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.2
• /
• pp.121-129
• /
• 2017

The present study numerically investigated the influence of the waveform distribution on the tsunami-vegetation interaction using a non-reflected wave generation system for various tsunami waveforms in a two-dimensional numerical wave tank. First, it was possible to determine the wave attenuation mechanism due to the tsunami-vegetation interaction from the spatial waveform, flow field, vorticity field, and wave height distribution. The combination of fluid resistance in the vegetation and a large gap and creates a vortex according to the flow velocity difference in and out of the vegetation zone. Thus, the energy of a tsunami was increasingly reduced, resulting in a gradual reduction in wave height. Compared to existing approximation theories, the double volumetric ratio of the waveform increased the reflection coefficient of the tsunami-vegetation interaction by 34%, while decreasing the transfer coefficient and energy attenuation coefficient by 25% and 13%, respectively. Therefore, the hydraulic characteristics of a tsunami is highly likely to be underestimated if the solitary wave of the approximation theory is applied for the tsunami.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.4
• /
• pp.75-89
• /
• 2017

Sinkholes are key karst landforms that primarily evolve through the dissolution of limestone, and it posing a significant threat to roads, buildings, and other man-made structures. This study aims to analyze the area susceptible to sinkhole development using GIS and to identify potential danger area from sinkholes. Eight sinkhole related factors (slope angle, distance to caves, distance to faults, bedrock lithology, soil depth, drainage class, distance to mines, and distance to traffic routes) were constructed as spatial databases with sinkhole inventory. Based on the spatial database, sinkhole susceptibility maps were produced using nearest neighbor distance and frequency ratio models. The maps were verified with prediction rate curve and area under curve. The result indicates that the nearest neighbor distance and frequency ratio models predicted 95.3% and 94.4% of possible sinkhole locations respectively. Furthermore, to identify potential sinkhole danger area, the susceptibility map was compared with population distribution and land use map. It has been found that very highly susceptible areas are along Osipcheon and southeast southwest part of Hajang-myeon and south part of Gagok-myeon of Samcheok-si. Among those areas, it has been identified that potential sinkhole danger areas are Gyo-dong, Seongnae-dong, Jeongna-dong, Namyang-dong and Dogye-eup. These results can be useful in the aspects of land use planning and hazard prevention and management.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.32-40
• /
• 2019

During the manufacturing process of a printed circuit board(PCB), fumes and mists are generated as the ink dries on the PCB surface. The generated fumes and mists are deposited in the dryer wall and the exhaust duct. Deposited fumes and mists may present a fire hazard if the dryer temperature control system fails. In this study, the thermal stability of the fumes and mists deposited in the dryer and ducts has been analyzed by experimental methods such as thermo gravimetric analysis (TGA), differential scanning calorimetry (DSC), auto ignition temperature (AIT), and multiple mode calorimetry(MMC). According to the experimental analyses, experimental samples are likely to generate gas at the temperature ($180{\sim}240^{\circ}C$) that deviates from the normal operating temperature ($150{\sim}156^{\circ}C$). It has been shown that the thermal stability is degraded when the temperature is deviated from the normal operating temperature. In the end, engineering and management safety measures of accidental prevention have been suggested.

• Journal of Distribution Science
• /
• v.19 no.12
• /
• pp.91-101
• /
• 2021

Purpose: This study aims to explore the effects of government's value intervention messages on the prevention and control of infectious disease in the risk communication process in terms of goveremnt policy response to COVID-19 from the mismatch message perspective, and draws the relevant implicaitons. Due to the infeciton spread, some people point out that depression caused by COVID-19 is because of wrong signals of the government and infectious disease prevention and control authorities, namely value intervention messsages. Research design, data and methodology: This study examined the epidcmic situation through message deails regarding the effects of government's mismatch messages on prevention and control of infectious disease and the resulting phenomena. Results: People's lives are under serious threat overall, so the declaration of the end of COVID-19 is almost impossible unlike MERS. Economic downturn due to foreced prevention and control regulaitons of COVID-19, mistruct of social distancing, fatigue on mismatch messages, and moral hazard on the awareness of prevention and control of infectious disease are negative phenomena to risk communiaiton on COVID-19. Conclusions: This study investigated the government authorities' policy sending wrong signals due to mismatching of the reality at this point in time for infectious disease prevention and control from the risk communicaiton perspectrive.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.2
• /
• pp.145-151
• /
• 2019

The coastal composite fishery has the highest rate of around 30.0% in registered fishing vessels of Korea for the last three years. The risk analysis for the fisher's safety of coastal composite fishing vessels was conducted to serve as a basic data for improving the healthy and safe working environment of fisher using fisher's occupational accidents of the national federation of fisheries cooperatives (NFFC) from 2016 to 2018 (n = 1,105). As a result, the occupational accident occurrence rate of coastal composite fishery was 3.76% in all industries, 7.8 times the rate of that. In addition, death and missing rate was found to have a serious level management to 10.10‱. Among the accidents, 76.0% occurred at sea. The slipping, others and contact with machinery or fishing gear occurred more frequently in order in the frequency of accident occurrence pattern. In the risk assessment using frequency and severity, slipping, contact with machinery and others showed high risk during fishing. The results are expected to contribute to identification and assessment of safety hazard occurred in coastal composite fishing vessels.