• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.55-55
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe?rature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.56-63
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe\ulcornerrature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.3
• /
• pp.195-202
• /
• 1993

This experiment was carried out to investigate the eft'ects of different seeding dates on the agronomic characteristics, forage yield and quality of fall sown cats(Avena sativa L.). The experiment was conducted at the forage experimental field, Seoul National University. Suweon in 1990. The results obtained are summarized as follows; 1. Present data indicated that plant and ear heights were decreased as the seeding date was delayed. Dry matter accumulation was increased due to the higher plant and ear heights. 1. When oats was seeded on August 20. the first heading and 50% heading dates were recorded on October 4 and 15, respectively. And when oats was seeded on August 25. the first heading and 5 0'!4 heading dates were observed on October 13 and 18. respectively. As seeding date was delayed for one day. the heading date was delayed for two days. 3. The dry mattcr percentage of oats seeded on August 20 was 20.1%, but that of oats seeded after August 10 was 15.1 to 16.7%. 4. According to the contents of CP. ADF and NDF, oats seeded on August 20 and 25 was evaluated to be the 3rd or 4th grade hay. and the other oats sceded after August 15 was recorded the 2nd or 3rd grade hay as proposed by AFGC. 5. There are no significant dry matter yield differences among the seeding dates of oats such as August 20, 25 and 30. but a significant yield difference was recorded between oats seeded in August and September. The same trend as the dry matter yield was observed in in vitro digestible dry matter and crude protein yields of oats seeded in August and September. According to the results. early seeding of early matuaring oats may be a better option than late seeding after August 30 for silage or hay production following silage corn harvest in the middle northern area of Korea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.4
• /
• pp.246-252
• /
• 1992

In order to reduce the problems from overlapping between rye harvest and maize seeding dates, and also to improve the growth, productivity and nutritive value of rye (Secale cereale L.), an experiment was carried out to determine the variety effect of rye on the forage production system, and seeding date effect on the yield and quality of rye. The experiment was conducted in the forage testing field of S.N.U., Suweon, from September 1988 to May 1989. The dry matter and in vitro digestible dry matter yields of rye harvested 14 April were 5.2 t and 4.6 t/ha with an early maturing rye variety, Winter more, but 3.1 t and 2.8 t/ha were obtained with a late maturing rye variety, Kodiak. When seeding date was delayed, a significant decrease in dry matter yield was observed. ADF and NDF contents, and IVDMD of an early maturing rye, Winter more, harvested 14 April were 25.6, 44.8 and 81.9 %, but those of a late maturing rye, Kodiak, were 21.1, 39.5 and 88.9 %, respectively. ADF and NDF contents of rye were increased as the seeding date was delayed, but ail forage ryes from different seeding dates as well as varieties were recorded as the 1st grade proposed by market hay grades. The dry matter and in vitro digestible dry matter yields of rye harvested at 80 %heading stage were significantly decreased as delayed seeding date, but no significant differences were found between early and late maturing varieties. No differences in ADF and NDF contents, and IVDMD of the rye harvested at 80% heading stage were found among the treatments, but all forage ryes were evaluated as the 4 th grade proposed by market hay grades.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.3
• /
• pp.173-177
• /
• 1992

This experiment was carried out to determine the effect of harvesting dates on the dry matter yield and quality of "Kool grazer" winter rye(Seca1e cereale L.) as a soilage crop at the Forage Experimental Field of College of Agrlc. and Life Sciences, SNU, Suweon. Four-day harvasting interval was allocated to measure the growth, yield and quality of rye from April 14 to May 18, 1987. Rye was rapidly grown as 3 cm/day and the growth was linearly recorded from the elongation to flowering stage. The dry matter and in vitro digestible dry matter(1VDDM) yields per ha were linearly increased up to 0.26 and 0.19 tonlday from April 14 to May 4 and April 14 to 29, respectively, but major breaks in yield increases occurred at the 50% heading stage, than yields increased. The highest crude protein yield was observed at the first heading stage of April 29, then decreased. Acid detergent fiber (ADF) and crude protein(CP) contents of rye at the heading stage of May 5 were 35 and 17%, respectively and the nutritive value of rye in terms of ADF and CP contents was evaluated as the I st grade hay, but neutral detergent fiber(NDF) content of rye was 47 % at the boot stage ofApril 22 and evaluated as the 2nd grade hay in terms of NDF content. The results indicate that the first heading stage or the end of April would be the most suitable harvesting time for early maturing winter rye as a soilage crop in terms of yield and quality in the middle northwestern coast rcgion of Korea. of Korea.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.783-800
• /
• 2007

The current study was conducted to investigate the effect of high quality hay on the performance and carcass characteristics of Hanwoo steers. Twenty(20) Hanwoo(7 months old) were allocated into either Control(rice straw fed) or Treatment(timothy hay and rice straw fed) group(10 animals per group) and fed for 710 days until the animals reached at 30 months old. Concentrates were fed according to the feeding program composed with three(3) phases; growing, fattening, and finishing period. For the overall feeding period, final body weights were 761.3 and 799.6kg for the Control and Treatment groups, respectively, showing 38.3kg heavier body weight in Treatment group. ADG were 0.79 and 0.84kg for Control Treatment groups, respectively. These results might be because of the intake of high quality hay during growing phase and the effects persisted until the end of the experiment. Feed intake tended to be higher in Treatment group whereas feed conversion did not show significant difference between groups. Cold carcass weights were 451.0 and 475.3kg for Control and Treatment, There were no significant difference between groups in both yield and quality grade. There were no remarkable differences in physico-chemical characteristics fatty acid composition of carcasses between groups. In conclusion, it would be beneficial to feed high quality hay such as timothy during growing period of Hanwoo steers to produce high quality beef with heavier live and carcass weight.

• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.451-458
• /
• 2004

No comprebensive forage quality of annual legumes harvested and cured in spring has been conducted in Korea. Therefore, this experiment was carried out to gain information on the quality of crimson clover (Trifolium incarnatum L.), bolta baIansa clover(Trifolium ba/anansae L.), and persian c1over(Trifolium resupinatum L.) during field curing in spring. The dry matter content of crimson clover at harvest was 24.7%, while bolta balansa and persian clovers had 20.4 and 18.8%, respectively. The moisture content of persian clover was low at the final curing day. But All species took 4 days to reach moisture content under 20%Tedding frequency did not affect moisture content, but consisten trends were also observed during the field curing. Persian clover tended to show a higher leaf-stem ratio than crimson and bolta balansa clovers on dry matter basis. Crude protein of persian clover(19.5%) was higher than other legumes. The percentage of erode protein was decreased from 17.8 to 16.5% as tedding frequency often did. Neutral detergent fiber(NDF) and acid detergent fiber(ADF) contents of persian clover were lower than those of other legumes. From the comparison among tedding frequency, NDF and ADF contents of three times were higher than those of one and two times. Relative feed value(RFV) of persian clover hay was the highest(178) and classified as Grade Prime in forage quality standard. Crimson and bolta balansa clovers in the RFV were also high quality as Grade 1 in forage quality standard. The RFV of legume hay was decreased from 150 to 140 as tedding frequency often did Results of the experiment indicate that hay quality of persian clover was higher than other clovers. And this is due to high leaf and stem content, hollow stem and late maturity stage. Then tedding frequency in annual legume can be teded by two times for quality.

• Korean Journal of Child Studies
• /
• v.32 no.4
• /
• pp.83-97
• /
• 2011

The purpose of this study was to examine the relationship between socioeconomic status, maternal involvement in learning, parenting behavior and children's self-determination motivation. The participants of this study consisted of 333 fifth- and sixth-grade elementary school children and their mothers living in Seoul. The results of this study indicated that mothers with a higher educational attainment reported greater autonomy support behavior and involvement in their offspring's learning. Conversely, mothers with low incomes were found to use psychological control and were also found to be involved in learning to a lesser degree. Hierarchical multiple regression analysis indicated that children whose mothers were less involved in learning showed higher levels of self-determination motivation. Additionally, maternal support for autonomy and psychological control had a number of moderating effects on the association between maternal involvement in learning and the child's self-determination motivation. Specifically, children tended to exhibit significantly lower levels of self-determination motivation when mothers were more involved in learning among those who received less support in terms of autonomy. Conversely, children had significantly higher levels of self-determination motivation when mothers were less involved in learning when it came to those children who were under less psychological control.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.386-392
• /
• 1999

A large-scale culture of hepatitis A virus in human diploid MRC-5 cells was conducted. In a roller bottle culture, the virus was grown to a maximum titer in 3 weeks after infection. Over 95％ of the cell-associated virus was excreted after culturing the infected cells in suspension media without fetal bovine serum for 3 days. The cultured virus was inactivated with formalin, concentrated by ultrafiltration, and partially purified by ultracentrifugation in a non-ionic gradient medium of Renocal. Two separate peak fractions showing high anti-HAY ELISA titer were pooled and about 40％ of HAV antigen was recovered by this purification procedure. Of the partially purified vaccine, the protein pattern in SDS-PAGE and immunogenicity in mice were compared with a commercial HAV vaccine. In SDS-PAGE, the purified vaccine in this study and the commercial vaccine showed almost the same protein pattern. The seroconversion rate of the purified vaccine in mice was not different from that of the commercial vaccine. Therefore, we could prepare a good grade of HAV vaccine by a simple purification procedure although the purification itself was not completed.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.5-12
• /
• 2016

Purpose: Quasi-steady state simulations have played a pivoting role to expand the user group of simulation to design engineers and architects in Korea. Initially they are introduced in the market as a building energy performance rating tool. In domestic practice, however, quasi-steady state simulations seem to be regarded as a de facto simulation only available for energy retrofit. Selection of ECMs and economic feasibility analysis are being decided through these tools, which implies that running these tools has become a norm step of the Investment-grade Audit. Method: This study aims at identifying issues and problems with the current practice via test cases, analyzing the reasons and opportunities, and then eventually suggesting proper uses of quasi-steady state and dynamic simulations. Result: The functionality of quasi-steady state simulations is more optimized to the rating. If they are to used for energy retrofits, their off-the-shelf functions also need to be expanded for customization and detailed reports. Yet their roles may be limited only to the go/no go decision; because their algorithms are still weak at precisely estimating energy and load savings that are required for making investment decisions compared to detailed simulations.