• 제목/요약/키워드: Haversting

검색결과 3건 처리시간 0.019초

동일 채널 간섭을 겪는 중계기의 전력 수집 방안 (The Method Energy Harvesting of Relay Undergo Co-Channel Interference)

  • 김태욱;;;공형윤
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 추계학술대회
    • /
    • pp.812-814
    • /
    • 2015
  • In this Paper, we proposed optimization of system performance, power splitting protocols applied to relay in the cooperative communication undergo co-channel interference. When relay adjust power distribution factors undergo co-channel interference, it is possible to optimize and maximize the channel capacity of the receiver. Because of energy haversting, interfence transfer to new power source. If we found optimal power levels, to solve inability in system, and to increase the efficiency of the network.

  • PDF

전력 분배 프로토콜을 통한 동일 채널 간섭을 겪는 중계기의 성능 최적화 방안 (Performance Optimization Method of Relay undergo Co-Channel Interference using Power Splitting Protocol)

  • 김태욱;공형윤
    • 한국인터넷방송통신학회논문지
    • /
    • 제15권3호
    • /
    • pp.67-71
    • /
    • 2015
  • 본 논문에서는 동일 채널 간섭을 겪는 중계기에 전력 분할 프로토콜을 적용하여 시스템의 성능을 최적화하는 방안을 제안하였다. 동일 채널 간섭을 겪는 중계기에 전력 분배 요인을 조절할 경우, 간섭 요인이 새로운 전력원으로 작용하기 때문에 수집 전력을 극대화할 수 있으며 수신단의 채널 용량을 최적화할 수 있다. 전력 분할 프로토콜이 적용된 중계기의 최적의 전력 분할 수준을 찾는다면 중계기 및 수신단의 불능 현상을 해결할 수 있으며 네트워크의 효율성을 높일 수 있다. 동일 채널 간섭 수준에 대한 아웃티지 확률 및 단대단 노드의 용량 성능을 분석함으로서 시스템의 성능을 평가한다.

장력을 이용한 EYE-type 압전 발전기의 출력 특성 (Generating Characteristics of EYE-type Piezoelectric-generator Using Tension)

  • 하용우;정성수;김나리;김명호;강신출;박태곤
    • 한국전기전자재료학회논문지
    • /
    • 제26권8호
    • /
    • pp.635-639
    • /
    • 2013
  • Generating output characteristics of a EYE-type piezoelectric generator depending on ceramic size and materials of the elastic body were studied. EYE-type piezoelectric-generating device consist of the ceramic was attached between the both elastic body. piezoelectric-generating is that if the tension occurred at both ends of an elastic body, the piezoelectric effect occurs at ceramics through the form change of the elastic body. The structure of this EYE-type generator use various area. than a existing type generator, because the ceramic position of the directly force at does not apply. Resonance and output characteristics of the generator were analyzed by using FEM program. Generators were fabricated on the basis of analyzed results and attached on a frequency controllable vibrator to measure output characteristics. Also, the experimental results were compared with the simulated results. As a result, output characteristics of the generator increased depending on the increase in ceramic thickness. In case of increase in ceramic width, resonance frequency of the generator also decreased.