• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.129.1-129.1
• /
• 2016

반도체, 디스플레이, PC 등 전자기기의 경우 소자 내 발생된 열로 인해 기기의 성능 및 효율, 수명 등이 감소하기 때문에 이러한 내부 열을 외부로 방출시켜줄 필요가 있다. 일반적으로 heat pipe나 냉각 팬(fan) 등의 외부장치에 의해 강제적으로 냉각해주는 기술이 있지만 휴대용 디바이스와 같이 작은 전자기기의 경우 소자 자체적으로 열전도 특성이 뛰어난 기판을 사용하여 열전도에 의해 열이 소자 밖으로 방출될 수 있도록 방열 설계를 해주어야 한다. 따라서 소자 전체를 지지해주고 열전도에 의해 방열 기능을 해주는 방열기판에 대한 관심이 증가하고 있다. 현재 가장 많이 사용되어지는 세라믹 방열기판으로는 알루미나가 있지만 보다 소자의 집적화와 고성능화로 인하여 열전도도가 높은 질화규소 기판의 요구가 증대되고 있다. 하지만 이러한 질화규소기판에 금속전극을 형성하는 기술은 종래의 알루미나 기판에 이용한 DPC(Direct Plated Copper), DBC(Direct Bonded Copper)기술을 적용할 수 없다. 그래서 현재는 메탈블레이징을 이용하여 전극을 형성하지만 공정비용 및 대형기판에 형성이 어려운 단점이 있다. 따라서, 본 연구에서는 질화규소 방열기판에 전기화학공정을 통하여 밀착력이 우수한 금속 전극 회로층 형성에 대한 연구를 진행하였다. 질화규소 방열기판에 무전해 Ni 도금을 통하여 금속층을 형성하는데 이 때 세라믹 기판과 금속층 사이의 낮은 밀착력을 향상시키기 위해 습식공정을 통하여 표면처리를 진행하였다. 또한 촉매층을 $Pd-TiO_2$ 층을 이용하여 무전해 도금공정을 이용하여 Ni, 전극층을 형성하였다. 질화규소 표면에 OH기 형성을 확인하기 위해 FT-IR(Fourier-transform infrared spectroscopy)분석을 실시하였으며 OH 그룹 형성 및 silane의 화학적 결합으로 인해 금속 전극층의 밀착력이 향상된 것을 cross hatch test 및 scratch test를 통해 확인하였고 계면 및 표면형상 특성 등을 분석하기 위해 TEM(Transmission electron microscopy), SEM(Scanning electron microscopy), AFM(Atomic-force microscopy)등의 장비를 이용하였다.

• 한국가금학회지
• /
• 제28권3호
• /
• pp.225-229
• /
• 2001

본 시험은 실용 육용종계 (Ross)의 종란 보관온도와 보관기간이 부화율에 미치는 영향을 구명하고자 하였다. 실험 1에서는 $4^{\circ}C$에서 종란을 3, 5, 7및 9일 보관하였을 때 부화율을 조사하였던 바, 3일 보관한 종란의 부차율이 다른 처리구보다 유의하게 우수하였다 (P<0.05). 실험 2에서는 $17^{\circ}C$에서 3, 5, 7 및 9일 동안 보관하였던 바, 보관기간에 관계없이 부화율이 감소하지 않았다. 실험 3에서는 $28^{\circ}C$에서 종란을 3, 5, 7 및 9일 동안 보관하였던 바, 9일동안 보관한 종란에서 부화율의 감소가 나타났다. 따라서 9일 이상 보관하는 육용종계 종란은 $17^{\circ}C$에 보관하는 것이 우수한 부화율을 유지할 수 있음을 입증하였다.

• 한국수산과학회지
• /
• 제5권3호
• /
• pp.83-87
• /
• 1972

낙동강산 징거미 Macrobrachium nipponensis의 생태적 제 특성을 조사한 결과는 아래와 같다. 1. 산란기간은 5월$\~$9월 사이이며 주 산란 시기는 7월이었다. 2. 성비 (숫컷/암컷$\times$100)는 연 평균 $62.9\%$이었으며, 산란기간 사이는 낮은 율이었고 동계에서 춘계 사이는 높은 율을 나타내었다. 3. 포란한 개체의 제일 작은 것은 체장 4.2cm 두흉갑장 1.5cm 체중 3.5g 내외였다. 4. 포란 미수의 출현율이 가장 많은 체장은 $5.75\~7.75cm$ 내외였다. 5. 상액각치수는 10개$\~$16개의 범위로서 13개의 범위로서 13개가 제일 많아 mode를 나타내었고, 하액각치수는 1개$\~$5개의 범위로서 3개의 출현율이 가장 많아 mode를 나타내었다.

• 한국환경보건학회지
• /
• 제39권5호
• /
• pp.426-437
• /
• 2013

Objective: Gotjawal refers to a special geographical designation found in Jeju Province, Korea, where vegetation forms over a rocky area. Due to the important ecological value of Gotjawal, international concern about such areas is growing. However, only limited information is available regarding environmental contamination of Gotjawal. This study was conducted in order to investigate the levels of contamination and associated ecotoxicological effects of surface water bodies in Gotjawal. Methods: Surface water samples were collected at three sampling sites in two Gotjawal areas and were analyzed for several pharmaceuticals and pesticides in consideration of the potential sources of contamination. The ecotoxicity of the samples was measured using water fleas (Daphnia magna and Moina macrocopa) and zebrafish (Danio rerio). In addition, effects on the gene transcription of zebrafish were investigated following exposure to the samples. Results: Nine pharmaceuticals were detected in the samples, but none of the target pesticides were detected. Following acute exposure to two surface water samples, the survival of waterfleas was significantly reduced, but reproduction was not affected. In zebrafish, time-to-hatch was delayed and fry survival was decreased in some samples. On the other hand, at the transcriptional level, there were no genes significantly influenced by exposure to the samples. Conclusion: This is the first study investigating environmental contamination in Gotjawal areas and associated ecotoxicities. Further studies are warranted to identify the cause of acute Daphnia toxicity and to determine potential consequences of longer-term exposure in Gotjawal areas.

• The Korean Journal of Ecology
• /
• 제7권4호
• /
• pp.232-238
• /
• 1984

The author hatched the eggs of Korean frog, Rana nigromaculata in natural water, and reared the tadpoles in natural water as control group and in seven copper ion groups contaminated by 0.1, 0.2, 0.3, 0.4, 0.5, 0.7, and 1.0 ppm of copper ion. The influences of copper ion on the growth of the tadpoles were analyzed, and the results were summarized as follows: 1) The copper ion inhibited the growth of the tadpole. 2) The tadpoles were not survived for 20 days in the copper ion of 0.4~0.5ppm, and in the 0.7ppm, the tadpoles were not survived for 1 day after hatch. 3) The critical lethal concentration of Korean tadpole is regarded as 0.6ppm of copper ion. 4) The growth of head with and body length show a convexin increase pattern. 5) In the growth quantity of head width and body length, that of natural water shows the most rapid increase pattern, and that of the copper ion groups 0.1, 0.2, and 0.3ppm follows in that order. 6) The coefficient of relative growth($\alpha$) of control group is the greatest value, and that of the copper ion groups of 0.1, 0.2, and 0.3ppm follows in that order. The natural water shows the positive allometry, the contaminated groups shows the negative allometry in the relative growth of the contaminated groups to the natural water. 7) Body length shows positive allometry in the relative growth to head width.

• 한국발생생물학회지:발생과생식
• /
• 제22권3호
• /
• pp.289-295
• /
• 2018

Large quantity of eggs fail to be fertilized and many of fertilized eggs are unable to hatch in the eel, Anguilla japonica. Larvae of eel absorb egg yolk up to 8 days after hatching but the majority of hatched larvae die before they reach the stage of first feeding in this species. Genes of key enzymes for yolk processing (cathepsin B, D, L and lipoprotein lipase - abbreviated as ctsb, ctsd, ctsl and lpl, respectively) could be associated with egg quality. In this study, we investigated differences in the expression of these genes between floating eggs and sinking eggs, and also the relationship between the gene expressions of the enzymes and fertilization rates in the fertilized eggs obtained from artificially matured female eels. Expressions of yolk processing enzyme genes did not show significant difference between floating and sinking egg groups. Expression of ctsb decreased when fertilization rate was high. Expression of ctsd, ctsl and lpl, however, did not show any significant differences. These results suggest that ctsb expression could be an indicator of egg quality, and that some proteins prone to be digested by ctsb could be very important in the process of fertilization and normal cleavage in this species. Further study should identify these critical proteins to improve our understanding on the quality of fish eggs.

• 한국발생생물학회지:발생과생식
• /
• 제24권1호
• /
• pp.19-30
• /
• 2020

The pH of water is one of the main environmental factors exerting selective pressure on marine and freshwater organisms. Here, we focus on the influence of pH on an organism's ability to maintain homeostasis and investigate the effects of acidification on immunity-related genes and osmotic pressure during early development of the olive flounder, Paralichthys olivaceus. The aim of our study was to determine the influence of various pH levels on the fertilized eggs and larvae of P. olivaceus. Gametes of P. olivaceus were artificially introduced and the resulting fertilized eggs were incubated at pH 4.0 (low), 6.0, and 8.0 (equivalent to natural sea water; control). We found that all eggs sank from the water column at pH 4.0. After 38 h, these eggs showed slow development. Hatching occurred more slowly at pH 4.0 and 6.0 and did not occur at all at pH 4.0. Result of gene expression, caspase and galectin-1 were expressed from the blastula to pre-hatch stages, with the exception of the two-cell stage. HSP 70 was also steadily expressed at all pH levels over the five days. The osmolality of fertilized eggs differed marginally at each stage and across pH levels. So, this results demonstrates that low pH level is detrimental to P. olivaceus fertilized eggs.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2003년도 학술발표대회 발표논문초록집
• /
• pp.98-98
• /
• 2003

Direct gene transfer to mammalian tissues has significant potential for gene therapy and transgenesis. Liposome-mediated in vivo transfection has begun to gain attention as an alternative to viral vectors, and may also be a good mode of transfection in gene transfer. Interestingly, polymerized cationic liposomes are reported to be very stable in the bloods and efficient for in vivo gene transfer. To examine a possible gene delivery in vivo, we investigated the efficacy and safety of the liposome-mediated gene transfer using vein injection in chick or mouse as model animals. The number of injected pGFP-LacZ using either a commercial or home-made liposomes was 8 and 19 at 16 and 7 day of hatch, respectively. One of injected chick of each experiments was analyzed and the rest is being bred. In mouse, 4/22 showed expression of pGFP-LacZ but 8/22 showed no expression and the remaining animals are also being bred. After injection of liposome/pGFP-LacZ complex into wing vein of 7 or 16 day-old chick, pGFP-LacZ was detected in various tissues isolated from not only young chick but also old chick were turned out to possess. exogenous DNA. Transcripts and proteins of the transgene were also detected by RT-PCR or histochemical analysis, respectively. These results suggest that injected DNA were inserted to genome and produced mRNA and proteins in various tissues and may give an important tools for effective gene delivery in gene therapy or transgenesis.

• 농약과학회지
• /
• 제19권4호
• /
• pp.418-423
• /
• 2015

포식성 천적 사막이리응애에 대하여 9종 살응애제의 영향을 평가하였다. 실험 살응애제 중 cyenopyrafen. spirodiclofen, spiromesifen, acequinocyl, bifenazate, flufenoxuron과 cyflumetofen 등은 사막이리응애의 암컷성충에 저독성을 나타내었으며, 암컷성충의 산란수와 산란된 난의 부화에 큰 영향이 없었다. 또한 이들 살응애제의 난에 대한 처리에서도 부화율에 영향이 없었다. Etoxazole은 암컷성충의 생존율에는 큰 영향이 없었으나 이들이 산란한 난의 부화율이 매우 낮았으며, 난에 대한 처리에서 높은 치사율을 나타내었다. Pyraclofos는 암컷성충에 대해 고독성으로 100%의 치사율을 나타내었다. Cyenopyrafen. spirodiclofen, spiromesifen, acequinocyl, bifenazate, flufenoxuron과 cyflumetofen 등을 처리한 먹이를 섭식한 암컷성충은 생존율과 산란수에 실질적인 영향을 받지 않았다. 이상의 결과로 보아 cyenopyrafen. spirodiclofen, spiromesifen, acequinocyl, bifenazate, flufenoxuron과 cyflumetofen 등은 식식성응애류의 종합관리체계에서 사막이리응애와 함께 이용될 수 있을 것으로 생각된다.

• 한국분말재료학회지
• /
• 제24권3호
• /
• pp.187-194
• /
• 2017

Selective laser melting (SLM) can produce a layer of a metal powder and then fabricate a three-dimensional structure by a layer-by-layer method. Each layer consists of several lines of molten metal. Laser parameters and thermal properties of the materials affect the geometric characteristics of the melt pool such as its height, depth, and width. The geometrical characteristics of the melt pool are determined herein by optical microscopy and three-dimensional bulk structures are fabricated to investigate the relationship between them. Powders of the commercially available Fe-based tool steel AISI H13 and Ni-based superalloy Inconel 738LC are used to investigate the effect of material properties. Only the scan speed is controlled to change the laser parameters. The laser power and hatch space are maintained throughout the study. Laser of a higher energy density is seen to melt a wider and deeper range of powder and substrate; however, it does not correspond with the most highly densified three-dimensional structure. H13 shows the highest density at a laser scan speed of 200 mm/s whereas Inconel 738LC shows the highest density at 600 mm/s.