• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.2
• /
• pp.3772-3777
• /
• 1975

This paper reports on the analysis of the distributions of probable days being good for mechanical rice harvesting and the method of determining the capacity of rice harvesting machinery for the given harvesting duration. In the analysis of the probability distribution of days being good for rice harvesting, the daily rainfalls above which mechanical field work may be impracticable were specified and their frequency of occurances was analyzed by using the weather records during past twenty-one years measured at five different locations. The conclusions being drawn from the analysis are as follows: 1. The distributions of probable workable days in different region and harvesting duration are very distinct and are different to set a uniform trend (refer to Fig. 1-4). 2. The occurance of probable days being good for mechanical field work under 66% confidence level are quite variable by region and by ten-day period. The analysis indicates that the probable workable days may range from 7.5 to 8.5 days of 10-day span within optimum harvesting duration (refer to Table 1). 3. Based on the probability distributions analyzed, the optimun capacities of harvesting machinery required for different harvesting areas and harvesting start-date were estimated as a function of operating duration (refer to Fig. 5 and Table 2)

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.314-320
• /
• 2019

BACKGROUND: As consumption of unripe mandarin increases, its cultivation has increased in open field cultivation areas. Because unripe mandarin must be harvested before ripening and color change, the optimum harvest time must be determined. This study investigated the effect of the harvest season on the yield of unripe fruit and biennial flowering of 'Miyagawa' satsuma mandarin. METHODS AND RESULTS: Two areas of unripe mandarin orchard were selected, and the yield, fruit growth, working time, and flowering of trees the following year were investigated. Fruit was harvested at 40, 60, 80, 100, and 120 days after full bloom and at general ripening. Fruit yield of unripe mandarin increased with later harvest time from 100^th to 120^th day except normal ripening. The next year, biennial occurred with normal ripening and harvesting, but not at the 120^th day after full bloom. At the 40^th day (earliest harvest time), summer and autumn shoots were present, but not after the 100^th day. The 40^th day required the most harvesting time; because the time gradually decreased with later harvest, the harvest time was shortest on the 120^th day, and general ripening occurred shortly after the 120^th day. CONCLUSION: Harvesting of unripe mandarin 100-120 days after full bloom was ideal to reduce harvesting time, enhance yield, and enable flowering the following year.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.1029-1035
• /
• 2005

A 3${\times}$4 factorial field experiment with a complete randomised split-plot design with four replicates was conducted from June 2002 to March 2003 at the experimental farm of the Nong Lam University, Ho Chi Minh City, Vietnam, to determine effects of different harvesting heights (10, 30 and 50 cm above the ground) and cutting intervals (45, 60, 90 and 285 days) on yield of foliage and tubers, and chemical composition of the foliage. Cassava of the variety KM 94 grown in plots of 5 m${\times}$10 m at a planting distance of 30 cm${\times}$50 cm was hand-harvested according to respective treatments, starting 105 days after planting. Foliage from the control treatment (285 days) and all tubers were only harvested at the final harvest 285 days after planting. Dry matter and crude protein foliage yields increased in all treatments compared to the control. Mean foliage dry matter (DM) and crude protein (CP) yields were 4.57, 3.53, 2.49, and 0.64 tonnes DM $ha^{-1}$ and 939, 684, 495 and 123 kg CP $ha^{-1}$ with 45, 60, 90 and 285 day cutting intervals, respectively. At harvesting heights of 10, 30 and 50 cm the DM yields were 4.27, 3.67 and 2.65 tonnes $ha^{-1}$ and the CP yields were 810, 745 and 564 kg $ha^{-1}$, respectively. The leaf DM proportion was high, ranging from 47 to 65%. The proportion of leaf and petiole increased and the stem decreased with increasing harvesting heights and decreasing cutting intervals. Crude protein content in cassava foliage ranged from 17.7 to 22.6% and was affected by harvesting height and cutting interval. The ADF and NDF contents of foliage varied between 22.6 and 30.2%, and 34.2 and 41.2% of DM, respectively. The fresh tuber yield in the control treatment was 34.5 tonnes $ha^{-1}$. Cutting interval and harvesting height had significant negative effects on tuber yield. The most extreme effect was for the frequent foliage harvesting at 10 cm harvesting height, which reduced the tuber yield by 72%, while the 90 day cutting intervals and 50 cm harvesting height only reduced the yield by 7%. The mean fresh tuber yield decreased by 56, 45 and 27% in total when the foliage was harvested at 45, 60 and 90 day cutting intervals, respectively. It is concluded that the clear effects on quantity and quality of foliage and the effect on tuber yield allow alternative foliage harvesting principles depending on the need of fodder for animals, value of tubers and harvesting cost. An initial foliage harvest 105 days after planting and later harvests with 90 days intervals at 50 cm harvesting height increased the foliage DM and CP yield threefold, but showed only marginal negative effect on tuber yield.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.2
• /
• pp.233-238
• /
• 2008

Recently, rainwater harvesting facilities have increasingly constructed mainly in elementary schools and government buildings. Nevertheless, few methods are available for efficient planning and design of rainwater harvesting facilities by considering the weather conditions and purpose of rainwater management in each site, which may lead to a construction of uneconomic facilities. The current method estimates the size of rainwater storage tank by multiplying the size of building or plottage with a certain ratio and has many limitations. In this study, we first developed a method for planning and design of rainwater storage facilities using $Rainstock^{TM}$ model, which is based on mass balance, and economic analysis. Then, the model was applied for the design of a rainwater harvesting facility in a building with the catchment area of $1,000m^2$. The model calculation indicated that the economic feasibility of rainwater harvesting depends on not only the size of storage tank but also the water usage rate. When the water usage rate is $1m^3/day$, the rainwater harvesting facility is not cost-effective regardless of the size of the storage tank. With increasing the water usage rate, the economical efficiency of the facility was improved for a specific size of the storage tank. Based on the model calculation, the optimum tank sizes for $5m^3/day$ and $10m^3/day$ of water usage rates were $24m^3$ and $57m^3$, respectively. It is expected that the model is useful for optimization of rainwater storage facilities in planning and designing steps.

• International Journal of Reliability and Applications
• /
• v.3 no.2
• /
• pp.61-80
• /
• 2002

Tree-harvesting worker data of 508 separate worker accidents are analyzed and an exploratory approach taken. The worker accident data cover a sample of five years. The scope of the study was the southeastern United States of America. As might be hypothesized, the chainsaw was the most hazardous type of tree-harvesting equipment. It accounted for 55％ of the tree-harvesting accidents. Most chainsaw accidents resulted in injuries to the lower extremities and were more frequent among younger employees. The probability of one or more chainsaw accidents occurring in any 30-day period was approximately 0.856. Chainsaw accidents were more likely to occur in late morning and early afternoon. We used statistical tools such as Pareto charts, c-charts and Ishikawa diagrams. Such tools are useful in diagnosing the root-cause of tree-harvesting worker accidents and help in developing preventive safety programs. Recommendations to help improve the quality of information of accident data collected by insurance companies and others are briefly given. The strategy and culture of continuous process improvements are stressed.

• Journal of Animal Science and Technology
• /
• v.64 no.2
• /
• pp.262-273
• /
• 2022

Under the four-cut system, low-lignin alfalfa (Medicago sativa L.) may extend harvesting intervals improving harvest management flexibility and producing forage products with higher nutritive values. The objective of this study was to compare forage yield and nutritive values of low-lignin and conventional alfalfa varieties when applied to six different harvest schedules in the first (2016) and second (2017) production years. There were 12 treatments of two alfalfa varieties as whole plots and six harvest schedules as subplots. Across harvest schedules, there were four cuttings in two production years. Three harvest intervals including "Standard" (high quality, HQ), "Standard+5-day" (medium quality, MQ), and "Standard+10-day" (high yield, HY) were chosen for the first cutting, and 30-day (HQ) and 35-day (HY) for the second cuttings. The third and fourth cuttings in 2016 were timed near final harvest date and in 2017 occurred at 35-day (MQ) and 40-day (HY). Variety by harvest schedule interaction was not significant, but the whole plot and sub-plot effects were significant. Hi-Gest 360 was consistently higher in nutritive value and with a similar yield as Gunner. Harvest schedules did not consistently differ in forage yield and nutritive values. HS-1 ("Standard" + 35-day + Medium Quality + High Yield) with shorter first two cutting intervals provided lower acid detergent fiber (ADF), neutral detergent fiber (NDF), higher relative feed value (RFV), and similar forage yield compared to other schedules. HS-1 had the highest economic incomes when considering RFV and yield among the six different harvest schedules.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.491-497
• /
• 2015

Small-sized tuber of sweet potato (Ipomoea batatas Lam.) is more preferred by Korean consumers, because it is convenient to eat with hands, and can easily be steamed or roasted in small pan as a healthy snack for a small family. The present study was aimed to investigate the effect of high-density plantings and harvesting times on production of smallsized tuber (50~200 g). Four varieties ('Annobeny', 'Daeyumi', 'Shinzami', and 'Yeonhwangmi') were planted in 2-row zigzag high-density planting ($75{\times}30cm$, A; $75{\times}25cm$, B) and 1-row planting ($75{\times}25cm$, control) covered with black vinyl film on May 23th, 2014. Marketable yields and small-sized tuber yields were compared between 120- and 150-day harvesting. Vine length and fresh weight per plant were significantly decreased in 2-row planting A and B plots compared to the control at 120 days after planting. Weight of tuber per plant, mean weight of tuber and number of tuber per plant were significantly decreased in 120-day harvesting of A and B plots than in the control. Marketable yields per 10a were increased by 17% ($2.4ton{\cdot}10a^{-1}$) and 8% ($2.6ton{\cdot}10a^{-1}$) in 120-day harvesting of A and B plots compared to the control ($2.4ton{\cdot}10a^{-1}$), and those were largely increased by 29% ($4.0ton{\cdot}10a^{-1}$) and 26% ($3.9ton{\cdot}10a^{-1}$) in 150-day harvesting than in the control ($3.1ton{\cdot}10a^{-1}$). Proportions of small size tuber (50~200 g) were increased by about 65% in 150-day harvesting of A and B plots compared to the control (55.3%). Small-size tuber yield and marketable yield were highly increased in 150-day harvesting of 2-row zigzag high-density planting A ($75{\times}30cm$).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.4
• /
• pp.53-59
• /
• 1982

In order to determine the optimun condition for the long term storage of potatoes by irradiation combined with natural low temperature, the dose range and irradiation time after harvesting of two varieties were investigated. Although optimum dose of potatoes and was different according to the variety 12.5krad seemed optimum untill 15-30 day after harvesting and 15krad was for later than 45 day after harvesting. The sooner the irradiation was efficient after harvesting. Optimum dose irradiated group were better in change of sprouting, rotting, weightloss and shrivelling and was extended the storage period more than four months compared with control at natural low temperature storage room.

• Applied Biological Chemistry
• /
• v.27 no.3
• /
• pp.169-173
• /
• 1984

In order to determine the optimum harvesting time based on grain filling and physico-chemical qualities for malting, three cultivars were harvested at every five days from 30th day after heading date at two experimental sites in the southern part of Korea. Starch accumulation and kernel weight increment were remarkable until 45th day after heading, but negligible after that. Content of ash, crude protein and polyphenolics and ${\alpha}-amylase$ activity decreased with maturation of grains and reached to the lowest value at 45th day after heading date. Germinative energy and capacity were good enough for malting from 40th day after heading date. The optimum harvesting time were estimated at 45th day after heading date in the increment of starch accumulation and kernel weight. At this time matured and immatured kernels were in the ratio 93 : 7. However, it is estimated that early harvesting time was at 40th day after heading date.

• Journal of Korean Society on Water Environment
• /
• v.27 no.5
• /
• pp.634-645
• /
• 2011

A newly developed rainwater harvesting (RWH) system reliability model is evaluated for roof area of buildings in Haeundae District of Busan. RWH system is used to supply water for toilet flushing, back garden irrigation, and air cooling. This model is portable because it is based on a non-parametric precipitation generation algorithm using a markov chain. Precipitation occurrence is simulated using transition probabilities derived for each day of the year based on the historical probability of wet and dry day state changes. Precipitation amounts are selected from a matrix of historical values within a moving 30 day window that is centered on the target day. Then, the reliability of RWH system is determined for catchment area and tank volume ranges using synthetic precipitation data. As a result, the synthetic rainfall data well reproduced the characteristics of precipitation in Busan. Also the reliabilities of RWH system for each of demands were computed to high values. Furthermore, for study area using the RWH system, reduction efficiencies for rooftop runoff inputs to the sewer system and potable water demand are evaluated for 23%, 53%, respectively.