• 한국약용작물학회지
• /
• 제26권6호
• /
• pp.464-470
• /
• 2018

Background: Ginseng produced by hydroponics can be cultivated without using agricultural chemicals; thus, it can be used as a raw materials for functional foods, medicines, and cosmetics. This study aimed to determine the optimal harvesting time to obtain the highest levels of ginsenoside and ginseng, as this was not previously unknown. Methods and Results: One-year-old organic ginseng seedlings were transplanted and cultivated using hydroponics for 150 days in a venlo-type greenhouse, using ginseng nursery bed soil and a nutrient solution ($NO_3{^-}-N$; 6.165, P; 3.525, K; 5.625, Ca; 4.365, Mg; 5.085, S; $5.31mEq/{\ell}$). Ginsenoside content and fresh and dry weights were higher at 120 days after transplanting than at 30, 60, 90, and 150 days. Total ginsenoside content was 11.86 times higher in the leaf and stem than in the root at 120 days after transplanting. Ginsenosides F1, F2, F3, and F5 were detected in ginseng leaves and stems. These chemical compounds are known to be effective in altering skin properties, including whitening, anti-inflammation, and anti-aging. Conclusions: Optimal harvesting time for ginseng cultivated using hydroponics was 120 days after transplanting when the biomass and ginsenoside content were highest.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.144-144
• /
• 2022

The amount of required forage is increasing by 20% every year in South Korea, but the cultivation area for forage production is limited. The yield ability of triticale forage is the highest among the winter forage crops including rye and the crop has cold tolerance within the average low temperature of -10℃ in January. Therefore, this study analyzed effects of sowing and harvesting times on feed value and quality for efficiently using and supplying triticale as livestock feed. Seed of the triticales, 'Joseong' was sown in 2021 fall (October) and 2022 spring (March). The triticales were harvested according to growth stages: seedling stage, booting stage, heading stage, 10 days after heading, and 20 days after heading. Moisture contents of each harvested triticales were adjusted to about 60%, and then the triticales were fermented for 40 days at room temperature under anaerobic conditions as silage. We have analyzed pH and organic acid to determine the feed value and quality of each silage. The contents of lactic acid in silage ofthe triticale harvested at the seedling stage of both fall and spring-sown (1.61%, 1.63%) were the highest among all of the silages; the booting stage (0.75%, 1.33%), the heading stage (0.50%, 0.69%), 10 days after the heading stage (0.31%, 0.42%), and 20 days after heading stage (0.22%, 0.40%). Such as the contents of lactic acid in the silages, and the pH value of the silages The pH value in both the fall- and spring-sown became lower as the triticale was grown up: seedling stage (7.05, 6.85), booting stage (6.21, 6.75), heading stage (6.18, 6.28), 10 days after heading stage (6.22, 6.17), and 20 days after heading stage (6.15, 5.81). Taken together, the results showed that the feed value and quality of triticale silage were more affected by harvesting time than sowing time.

• 한국잠사곤충학회지
• /
• 제40권1호
• /
• pp.8-12
• /
• 1998

The study aimed at development of a riding-type mulberry harvester for mechanical harvest. A riding-type mulberry harvester has been developed to harvest on sloped land with a higher efficiency. It has been implemented over a period of 2 years from 1996 to 1997. The result is as follows. It moves on carterpillar with a level adjusting system. It reduced only from 14.6 hrs to 0.9hrs/10a for cutting in a range of 25 to 80 cm high and possibly used for both spring and autumn. It reduced only the labor requirements of mulberry harvesting by 94 percent, as compared to that of the manual harvest. All related processes, cutting, binding and loading are simultaneously done by this harvester and totally it can reduce 96 percent of the labor requirements, as compared to 20.4 hrs/10a of the manual harvest. The machine compared to improved mulberry harvest efficiency with 11.11a per hour by about 23 times as compared to 0.49a per hour manpower. Cost analysis indicated that the riding-type mulberry harvester saved overall cost by 66 percent from 980,000 won per ha manpower to 330,000 won per ha.

• 한국잠사곤충학회지
• /
• 제17권1호
• /
• pp.41-46
• /
• 1975

가잠견의 실용형질에 있어서 자웅간의 개체차이를 알기 위하여 잠 111$\times$잠 112의 19아구 (자견 843과, 웅견 806과)에 대하여 각 시양형질별로 견질의 개체변이, 동 아구내변이 및 동 아구간변이를 조사하였고, 정적 자웅 각 300과에 대한 일변화를 조사한 결과는 다음과 같다. 1. 견질의 변이 2. 견질의 일변화 전견중의 감모율은 용기의 초기보다 말기에 컸으며 그 경향은 자견보다 웅견이 더 컸다.

• Journal of Biosystems Engineering
• /
• 제43권1호
• /
• pp.30-36
• /
• 2018

Purpose: The objective of this study is to evaluate the effect of cultivation conditions on the growth and glucosinolate content of Chinese cabbage and kale. Methods: Chinese cabbage and kale were grown in three different cultivation conditions, including a plant factory, greenhouse, and open field. Samples were collected at two harvesting times (10 d and 20 d after transplanting the seedlings). Nine growth parameters (plant height, plant width, number of leaves, petiole diameter, SPAD readout, leaf length, leaf width, stem diameter, and plant weight) were measured immediately after harvesting, and the samples were freeze-dried and stored until the glucosinolate content was analyzed. Mean values of the growth parameters and glucosinolate contents were evaluated using Duncan's multiple range tests. Results: The results indicated that the plant parameters of the Chinese cabbage and kale were greater for plants grown in the plant factory and greenhouse. The plant height, width, and weight showed significant differences in the Duncan's multiple range tests at a 5% level. The plant factory also produced greater contents of most of the glucosinolates. Conclusions: Three different cultivation conditions significantly affected the growth and glucosinolate contents of Chinese cabbage and kale. Further study is necessary to investigate other functional components and different vegetable varieties.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.210-210
• /
• 2017

Sorghum is rich source of various phytochemicals including phenolic acids that have potential to significantly impact human health. Phytochemical production may be induced by not only genotype but a number of environmental factors including temperatures and amount of sunshine. The objective of this study was to determine the effect of planting date and harvesting stage on the agronomic and quality traits of 'Donganme' grain sorghum variety developed to produce high antioxidant activity. 'Donganme' were planted in three locations at four dates from early May to early July. Each planted fractions were harvested five times 35, 40, 45, 50, 55 days after head shooting date, respectively. Significant difference existed between the growth period and the agronomic traits. The interaction effects planting date and harvesting date was significant for plant height, tiller production, grain yield and antioxidant activity, indicating that low temperature and integrated sunshine influence on that traits. The result showed that antioxidant activity production occurred when the sorghum crop was grown in late season although the yield is lower. To produce antioxidant activity from sorghum grain need to consider the relation between the yield and nutrition component simultaneously.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.707-714
• /
• 2016

We present a piezoelectric energy harvester with stopper-engaged dynamic magnifier which is capable of significantly increasing the operating bandwidth and the energy (power) harvested from a broad range of low frequency vibrations (<30 Hz). It uses a mass-loaded polymer beam (primary spring-mass system) that works as a dynamic magnifier for another mass-loaded piezoelectric beam (secondary spring-mass system) clamped on primary mass, constituting a two-degree-of-freedom (2-DOF) system. Use of polymer (polycarbonate) as the primary beam allows the harvester not only to respond to low frequency vibrations but also generates high impulsive force while the primary mass engages the base stopper. Upon excitation, the dynamic magnifier causes mechanical impact on the base stopper and transfers a secondary shock (in the form of impulsive force) to the energy harvesting element resulting in an increased strain in it and triggers nonlinear frequency up-conversion mechanism. Therefore, it generates almost four times larger average power and exhibits over 250% wider half-power bandwidth than those of its conventional 2-DOF counterpart (without stopper). Experimental results indicate that the proposed device is highly applicable to vibration energy harvesting in automobiles.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.94.2-94.2
• /
• 2012

에너지 하베스터에 적용 가능한 $0.72Pb(Zr_{0.47}Ti_{0.53})O_3-0.28Pb((Ni_{0.55}Zn_{0.45})_{1/3}Nb_{2/3})O_3$ (PPZNN) 후막세라믹의 구조적 압전 특성을 조사하였다. $850^{\circ}C$에서 하소를 마친 파우더를 72시간 볼 밀링 처리한 후, 테잎 캐스팅 공정을 이용하여 0.3mm의 두께로 PPZNN 압전 세라믹을 제조하였다. $900^{\circ}C$에서 $1200^{\circ}C$까지 다양한 온도에 소결하여 온도가 증가될수록 정방형 구조로 상전이 거동하는 모습을 보였으며, 특히 $1050^{\circ}C$에서 소결된 PPZNN후막 세라믹은 이차상이 없는 고밀도의 미세구조가 관찰되었다. $d_{33}$=440 pC/N 그리고 kp = 0.46의 우수한 압전 특성을 보였으며, 에너지 변환 성능을 나타내는 $d33{\cdot}g33$ 값은 약 $20439{\times}10^{-15}\;m^2/N$ 로 매우 우수하였다. PPZNN후막 세라믹을 유니몰프 켄틸레버 형태로 제작하여 발전 평가하였을 때 저항이 470 $k{\Omega}$에서 969 ${\mu}W$ (4930 ${\mu}W/cm^3$)로 관찰되었다. PPZNN 후막 압전 세라믹은 향후 압전에너지 하베스터 소재로 다양한 응용분야에 사용될 것으로 예상된다.

• 한국전기전자재료학회논문지
• /
• 제30권4호
• /
• pp.218-222
• /
• 2017

In this paper, in order to develop excellent composition ceramics for a piezoelectric energy- harvesting device, we synthesized $0.99(Na_{0.52}\;K_{0.443}\;Li_{0.037})(Nb_{0.883}\;Sb_{0.08}\;Ta_{0.037})O_3$ + $0.01(Sr_{0.95}Ca_{0.05})TiO_3$ + $0.3\;wt%\;Bi_2O_3\;+\;0.3\;wt%\;Fe_2O_3\;+\;0.3\;wt%\;CuO$ (abbreviated as NKN-SCT) ceramics with different sintering times, using the ordinary solid-state reaction method. The effect of sintering time on the microstructure and piezoelectric properties was investigated. The ceramics with the sintering time of 7 h have the optimum values of the piezoelectric constant ($d_{33}$), piezoelectric voltage constant ($g_{33}$), planar piezoelectric coupling coefficient (kp), mechanical quality factor (Qm), and dielectric constant (${\varepsilon}r$): $d_{33}=314[pC/N]$, $g_{33}=20.07[10^{-3}mV/N]$, kp = 0.442, Qm = 93, ${\varepsilon}r=1,768$, all being suitable for a piezoelectric energy-harvesting device.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.345-357
• /
• 2023

The present study conducted a stem analysis to trace growth information of Japanese larch (Larix kaempferi) and predict the future changes in growth volume. For this purpose, six L. kaempferi trees over 47 years old were cut at 1-2 m intervals from a height of 0.2 m, and circular plates of 5 cm thickness were collected for stem analysis. The analysis indicated that approximately 1-8 years are required to grow up to chest height. The annual height and diameter growth increased rapidly until the trees are 15 years old and gradually decreased after 20 years. The volume of 30-year-old trees in Oegam-ri forests, which were well-managed after artificial reforestation, was 0.4837 m³, whereas that in unmanaged Singi-ri forests was 0.1956 m³. Although the volume of individual trees differed greatly depending on the forest management status, it was found that the volume increased by 1.67-1.76, 2.49, and 3.49 times at 40, 50, and 60 years age, respectively, compared to the legal harvesting age 30. Therefore, factors such as the carbon dioxide reduction effect, forest management benefits, and the condition of trees at the site should be considered before harvesting trees.