• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.3
• /
• pp.374-383
• /
• 2010

Microwave radar can penetrate cloud cover regardless of weather conditions and can be used day and night. Especially a ground-based polarimetric scatterometer has advantages of monitoring crop conditions continuously with full polarization and different frequencies. Kim et al. (2009) have measured backscattering coefficients of paddy rice using L-, C-, X-band scatterometer system with full polarization and various angles during the rice growth period and have revealed the necessity of near-continuous automatic measurement to eliminate the difficulties, inaccuracy and sparseness of data acquisitions arising from manual operation of the system. In this study, we constructed an X-band automatic scatterometer system, analyzed scattering characteristics of paddy rice from X-band scatterometer data and estimated rice growth parameter using backscattering coefficients in X-band. The system was installed inside a shelter in an experimental paddy field at the National Academy of Agricultural Science (NAAS) before rice transplanting. The scatterometer system consists of X-band antennas, HP8720D vector network analyzer, RF cables and personal computer that controls frequency, polarization and data storage. This system using automatically measures fully-polarimetric backscattering coefficients of rice crop every 10 minutes. The backscattering coefficients were calculated from the measured data at a fixed incidence angle of $45^{\circ}$ and with full polarization (HH, VV, HV, VH) by applying the radar equation and compared with rice growth data such as plant height, stem number, fresh dry weight and Leaf Area Index (LAI) that were collected at the same time of each rice growth parameter. We examined the temporal behaviour of the backscattering coefficients of the rice crop at X-band during rice growth period. The HH-, VV-polarization backscattering coefficients steadily increased toward panicle initiation stage, thereafter decreased and again increased in early-September. We analyzed the relationships between backscattering coefficients in X-band and plant parameters and predicted the rice growth parameters using backscattering coefficients. It was confirmed that X-band is sensitive to grain maturity at near harvesting season.

• Journal of Intelligence and Information Systems
• /
• v.22 no.1
• /
• pp.119-138
• /
• 2016

Since the Industrial Revolution, which made the mass production and mass distribution of standardized goods possible, machine-made (manufactured) products have accounted for the majority of the market. However, in recent years, the phenomenon of purchasing even more expensive handmade products has become a noticeable trend as consumers have started to acknowledge the value of handmade products, such as the craftsman's commitment, belief in their quality and scarcity, and the sense of self-esteem from having them,. Consumer interest in these handmade products has shown explosive growth and has been coupled with the recent development of three-dimensional (3D) printing technologies. Etsy.com is the world's largest online handmade platform. It is no different from any other online platform; it provides an online market where buyers and sellers virtually meet to share information and transact business. However, Etsy.com is different in that shops within this platform only deal with handmade products in a variety of categories, ranging from jewelry to toys. Since its establishment in 2005, despite being limited to handmade products, Etsy.com has enjoyed rapid growth in membership, transaction volume, and revenue. Most recently in April 2015, it raised funds through an initial public offering (IPO) of more than 1.8 billion USD, which demonstrates the huge potential of online handmade platforms. After the success of Etsy.com, various types of online handmade platforms such as Handmade at Amazon, ArtFire, DaWanda, and Craft is ART have emerged and are now competing with each other, at the same time, which has increased the size of the market. According to Deloitte's 2015 holiday survey on which types of gifts the respondents plan to buy during the holiday season, about 16% of U.S. consumers chose "homemade or craft items (e.g., Etsy purchase)," which was the same rate as those for the computer game and shoes categories. This indicates that consumer interests in online handmade platforms will continue to rise in the future. However, this high interest in the market for handmade products and their platforms has not yet led to academic research. Most extant studies have only focused on machine-made products and intelligent services for them. This indicates a lack of studies on handmade products and their intelligent services on virtual platforms. Therefore, this study used signaling theory and prior research on the effects of sellers' characteristics on their performance (e.g., total sales and price premiums) in the buyer-seller relationship to identify the key influencing e-Image factors (e.g., reputation, size, information sharing, and length of relationship). Then, their impacts on the performance of shops within the online handmade platform were empirically examined; the dataset was collected from Etsy.com through the application of web harvesting technology. The results from the structural equation modeling revealed that the reputation, size, and information sharing have significant effects on the total sales, while the reputation and length of relationship influence price premiums. This study extended the online platform research into online handmade platform research by identifying key influencing e-Image factors on within-platform shop's total sales and price premiums based on signaling theory and then performed a statistical investigation. These findings are expected to be a stepping stone for future studies on intelligent online handmade services as well as handmade products themselves. Furthermore, the findings of the study provide online handmade platform operators with practical guidelines on how to implement intelligent online handmade services. They should also help shop managers build their marketing strategies in a more specific and effective manner by suggesting key influencing e-Image factors. The results of this study should contribute to the vitalization of intelligent online handmade services by providing clues on how to maximize within-platform shops' total sales and price premiums.

• Korean Journal of Agricultural Science
• /
• v.8 no.2
• /
• pp.224-230
• /
• 1981

Threshing forces of seven varieties, that is, three Japonica type varieties-Irri 348, Irri 345, and Milyang 15, and four Indica type varieties-Milyang 23, Irri 342, Suweon 294 and Suweon 287-, which have been cultivated in the standard fertilization field being at Chungnam Provincial Office of Rural Development, Youseong, Chungnam-do, they were measured every other day in the period from September 28 to October 20 which were included the proper harves ting time. Also the threshing forces were checked in three-dimensional directions. Relationships between threshing forces and moisture contents of the unthreshed rice were examined in the laboratory as dried in the natural condition. The results of this study were as follows; 1. The mean threshing force of Japonica type varieties was about 1969r. and that of Indica type varieties was about 113gr. when external force was loaded in the direction parallel to the grain. 2. The threshing force bent to the grain was about 9.8through 28.2gr. equal to 7 through 21 percent to the threshing force parallel to the grain in Indica type varieties meanwhile about 59.8 through 115.0gr equal to 33 through 50 percent in Japonica type varieties. 3. Under the warmer temperature than $0^{\circ}C$, the change of threshing forces was not great in this experimental period on the harvesting dates. 4. The threshing force decreased s lightly as moisture content decreased in natural drying under the shade after cutting. 5. The threshing force of the lower portion was a little biger than that of the upper portion in an ear.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.4
• /
• pp.483-491
• /
• 2014

Double cropping system including paddy field soybean is widely adopted nationwide, due to rise in market price and its higher income than paddy field rice. Sowing date of soybean as a second crop is being delayed depending on first crop's growth period and harvesting time. Due to the increased temperature in October and delayed first frost date, soybean could be harvested without frost damage even in late-plating. Therefore, selection of soybean cultivar which is appropriate for this environment is very important. The effect of sowing date and genotype of soybean on growth and yield was investigated for three planting dates (June 20, July 5, and July 20) with ten cultivars developed for soy-pate production, to figure out plant development and yield pattern in delayed planting. As planting date is delayed, plant height and pod number was decreased and this pattern was more clearly detected in mid-late maturity cultivars. Hundred-seed weight did not show significant changes even in late planting, due to compensations between yield components. Yield reduction of July 20 in contrast to that of June 20 showed that Nampung (9.6%) showed the least yield decline. Maximum yield was achieved from Daepung, Taekwang, and Uram among other soybean cultivars in late planting. Shortening of growth period was strongly detected in reproductive stage while length of vegetative stage was regularly maintained in both early and mid-late maturity cultivars.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.327-334
• /
• 2014

Light intensity is one of the most important requirements for plant growth, affecting growth, development, survival, and crop productivity. Sunlight is the main energy source on Earth which is energy used by photosynthesis to convert light energy to chemical energy. In this study, the light use efficiency and photosynthetic characteristics of high-quality rice cultivars were evaluated after shading on ripening stage. For the study, we treated of three levels of shade (0, 50 and 70%) on rice at ripening stage and two levels of nitrogen (9 and 18 kg/10a) used three high yielding rice cultivars, such as Boramchan, Hopum, and Honong. The shade was given for the respective plots from heading up to harvesting. We were performed to determine growth survey, SPAD and chlorophyll fluorescence every 10 days interval after shading on ripening stage. At harvest stage, grain yield and yield components were determined. Results of analysis of the results representing the maximum photosynthetic efficiency of PSII, Fv/Fm, and SPAD were decreased by depending on the time at full sunlight. But shade treatments were not changed and a significant difference among cultivars did not appear. Compared with the full sunlight, shade treatments significantly delayed ripening rate and decreased rice quality of cultivated rice. Therefore, rice yield, can be reduced in proportion to the shading density is apparent, the rate of decrease was not observed difference between varieties, when protected from light 70%, and decreased to less than 50%. The adverse effects of low light intensity on the yield and yield components were not able to significantly minimize by the nitrogen level.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.398-410
• /
• 1982

Summer crops grown in uplands are greatly diversified and show a large variation in difference with year and location in Korea. The principal factor for the variation is weather, in which precipitation and temperature play a leading role and such a weather factors as wind, sun lights also influence production of the summer crops. Since artificial control of weather conditions as a main stress factor for crop production is almost impossible, it must be minimized only by an improvement of cultivation techniques and crop improvement. Precipitation plays a role as one of the most important factor for production of the summer crops and it is considered in two aspects, drought and excess moisture. This country, which belongs to monsoon territory, necessarily encounter one of this stress almost every year, even though the level is different. Therefore, the facilities for both drought and excess moisture are required, but actually it is not easy to complete for them. On this account, crops tolerant to drought, excess moisture and pests should be considered for establishing summer crops. For the districts damaged habitually every season, adequate crops should be cultured and appropriate method of planting, drainage and weed control should be applied diversely. Injuries by temperature is mainly attributed to lower temperature particularly in late fall and early spring, although higher temperature often causes some damages depending upon the kind of crops. Sometimes, lower temperature in summer season playa critical role for yield reduction in the summer crops. However, certain crops are prevented to some extent from this kind of stress by improving varieties tolerant to cold, hot weather or early maturing varieties. As is often the case, control of planting time or harvesting is able to be a good management for escaping the stress. Lodging, plant diseases and pests are considered as a direct or indirect damage due to weather stress, but these are characters able to be overcome by means of crop improvement and also controlled by other suitable methods. In addition, polytical supports capable of improving constitution of agriculture into modern industry is urgently required by programming of data for the damages, establishment of damage forecasting and compensation system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.4
• /
• pp.331-336
• /
• 2012

This study was carried out to evaluate the wheat cultivation system to reduce costs and mechanize wheat production. A field study was conducted for 2 years (2009 to 2010) at the National institute of crop science, Iksan, Korea. We used working system I and working system II for the experiment. Working system I is used a multiple machine attached with a spreader tractor (seeding, fertilization, seed coverage, and weed control functionality) and working system II is used a multiple machine with a tractor which works for simultaneous job when seeding step (seeding, fertilization, and seed coverage). Sowing to harvesting operation time is 118 hours/ha for mechanize with conventional planting. Working system I is a multiple machine and a combine machine with a tractor, which worked 26 hours/ha lower than conventional planting. Working system II is 18 hours/ha lower than conventional planting. The reduced work efforts of working system I and II were 78% and 85% respectively. The growth and yield of wheat according to working system I and II is lower than conventional planting. Therefore, a multiple machine needs to study for appropriate seeding rate. Mechanization cost in consideration of the mechanical break-even point when the working system I is 3.7 ha and working system II is 4.2 ha. The farm income is enhanced by working system I (778,110 won/ha) and working system II (849,930 won/ha). The results showed that application of a multiple machine lowered costs of wheat production.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.3
• /
• pp.171-178
• /
• 1998

This experiment was conducted to study on forage utility of Diplachne fusca L. which live in reclaimed saline land of midwest region of Korea. The primary experiment was conducted to know on germination characteristics of Diplachne fusca L. according to storage condition after seed harvesting, light, temperature, flooding depth, salinity and soil covering. The results obtained are summarized as follows; 1. The germination percentage, average days to germination, germination rate and coefficient of germination were not different in existence of light, combination with existence of light and storage condition, but those were higher different in storage condition. 2. The germination characteristics were more higher on the condition of alternating temperature than constant temperature, and it was the highest on the condition of alternating temperature with $35/25^{\circ}C$ and constant temperature with $35^{\circ}C$. 3. There were apparently significant in germination percentage, average days to germination, germination rate and coefficient of germination according to flooding depth. The germination characteristics of D. fusca L. were the highest on the wndition of flooding depth with Ocm and did not germinate on the condition of flooding depth more than 3cm. 4. There were apparently significant in germination percentage, average days to germination, germination rate and coefficient of germination according to salinity. Germination characteristics were the highest on the condition of salinity with 0.2%. There was more than 30% of germination percentage on the condition of salinity with 1% SO Diplachne fuaca L. was suitable to cultivate in reclaimed saline land. 5. The germination percentage, average days to germination, germination rate and coefficient of germination were significantly difference between soil covering. So Germination characteristics were the highest on the condition of soil covering with 0.2cm. But they scarcely germinated on the condition of more than 1cm of the soil covering.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.3
• /
• pp.197-210
• /
• 2009

To improve the forage quality and reduce nitrogen input, trial was conducted on the effect of seeding method, combination, and nitrogen fertilizer with WCB (whole crop barley) and leguminous plant. Present experiment was carried out by split-split design having seeding methods for main plot, combinations for sub-plot, and nitrogen fertilizers for sub-sub plot with three replications. When WCB and leguminous plant were mixed-sown, WCB showed earlier heading and maturing than those of inter-sown, and the more nitrogen delayed growth stage a little. Occurrence of BaYMV (Barley Yellow Mosaic Virus), a serious disease caused by soil fungi and decrease barley yield, was deterred by mixed-seeding as compared to inter-sown barley a little. Inter-sown WCB increased the number of spike per $m^2$ as compared to mixed-seeding showing more spikes with nitrogen increase. WCB produced much fresh and dry matter yield at mixed-seeding than inter-seeding, and had advantage with hairy vetch (HV). Increased nitrogen showed much forage yield, however, half application of it is considerable for environmental-friendly farming. Electric conductivity (EC) decreased in inter-cropping or mixed-sowing soil with WCB and leguminous crop after harvest. But, organic matter (OM) content of soil after harvesting was vice versa. Acid detergent fiber (ADF) and Neutral detergent fiber (NDF) of WCB plant were higher at mixed-seeding than those of inter-sown ones. It showed increased tendency with time progress.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.295-303
• /
• 1999

An experiment was conducted to evaluate the possibility of using basic oxygen furnace (BOF) slag as a soil conditioner in rice paddy field. In 1997, rice (Oryza sativa B. cv. Dongjinbyeo) crop was cultivated under different application rates of BOF slag at three different places, Inandong Sunchon city, Youjunglee Bosung province, and Nampyung Najoo city. In each paddy field, five treatments, four application rate of BOF slag (0, 4, 8, $12Mg\;ha^{-1}$) and one application rate of lime ($2Mg\;ha^{-1}$) were tried with three replications. Plant height, number of tillers per hill, leaf area per hill, leaf dry weight, calm dry weight or shoot dry weight per hill were measured five times at the interval of seven days. Chemical contents of rice plants and soil were also measured at the same sampling date Yield were estimated by harvesting $6.6m^2$ per experimental unit and yield components were measured by sampling 10 plants per experimental unit at the harvest date. Application of BOF slag hardly affected contents of soil organic matter, available phosphate and potassium in soil. Soil pH and contents of Ca, Mg, Fe and $SiO_2$ enhanced as BOF slag rate increased. Enhancement of soil pH by ROF slag treatment appeared to be closely related with increase in soil Ca content. Application tate of $2Mg\;ha^{-1}$ of lime showed almost the same effect, in increase of soil Ca content as application rate of $4{\sim}8Mg\;ha^{-1}$ of BOF slag, Fe content in soil decreased sharply as time passed after slag treatment and stabilized more or less at the later sampling date. Contents of inorganic matter in plant such as total nitrogen, phosphate, potassium and Mg were not affected by BOF slag treatment. However, contents of Ca, Fe, and $SiO_2$ in plants increased as slag rate became higher. The growth of rice plants with BOF slag treatment was more or less slower but continued persistently up to the later growth stage, so that growth of plants with BOF slag treatment was almost the same nr even greater than that of control or lime treatment. However, BOF slag rate of $12Mg\;ha^{-1}$ seemed to be too high because all the measurements of plant, growth at this rate showed lower values than those of other treatments at all the sampling dates. Treatments of BOF slag $4Mg\;ha^{-1}$ or $8Mg\;ha^{-1}$ showed higher rough rice yield than other treatments, so that the optimum BOF slag ratein rice paddy field seemed to be in the rage of $4{\sim}8Mg\;ha^{-1}$.