• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4220-4241
• /
• 2017

For the downlink energy-harvesting small cell network, this paper proposes an interference management algorithm based on distributed coalitional game. The cooperative interference management problem of the energy-harvesting small cells is modeled as a coalitional game with transfer utility. Based on the energy harvesting strategy of the small cells, the time sharing mode of the small cells in the same coalition is determined, and an optimization model is constructed to maximize the total system rate of the energy-harvesting small cells. Using the distributed algorithm for coalition formation proposed in this paper, the stable coalition structure, optimal time sharing strategy and optimal power distribution are found to maximize the total utility of the small cell system. The performance of the proposed algorithm is discussed and analyzed finally, and it is proved that this algorithm can converge to a stable coalition structure with reasonable complexity. The simulations show that the total system rate of the proposed algorithm is superior to that of the non-cooperative algorithm in the case of dense deployment of small cells, and the proposed algorithm can converge quickly.

• 스마트미디어저널
• /
• 제8권2호
• /
• pp.21-28
• /
• 2019

최근의 에너지 하베스팅 무선 센서 네트워크에 대한 연구는 제한된 에너지 자원 문제를 해결하여 네트워크 수명을 효율적으로 연장시킬 수 있는 기술 개발에 집중되고 있다. 에너지 하베스팅 기술은 무선신호에 포함된 에너지를 이용하여 배터리를 충전시킴으로써 네트워크 수명을 지속적으로 연장시킬 수 있는 장점을 지니고 있으나 에너지를 수확하는 시간 동안에는 데이터를 전송할 수 없기 때문에 에너지 수확양이 증가할수록 데이터 전송지연도 증가하는 문제점을 지니고 있다. 이에 따라 에너지 하베스팅 무선 센서 네트워크를 설계할 때에는 네트워크 수명 연장뿐만 아니라 전송지연 축소 문제를 모두 고려하여야 한다. 본 논문에서는 네트워크에 유입되는 트래픽 양과 수확되는 에너지양에 따라 데이터 전송에 필요한 에너지를 계산하고 패킷데이터의 전송 시간을 조절함으로써 종단간 네트워크 지연을 최소화하는 MAC 프로토콜을 제안한다. 이를 위해 에너지 수확 시간을 측정하여 네트워크의 수면 시간을 조절하는 에너지 관리 메커니즘을 설계한다. 또한, 시뮬레이션을 이용한 성능평가를 통하여 기존의 MAC 프로토콜보다 에너지 소비량과 종단간 지연 측면에서 성능이 향상됨을 보인다.

• 제어로봇시스템학회논문지
• /
• 제15권12호
• /
• pp.1184-1191
• /
• 2009

Energy harvesting from environment can make the energy constrained systems such as sensor networks to sustain their lifetimes. However, environmental energy is highly variable with time, location, and other factors. Unlike the existing solutions, we solved this problem by allowing the sensor nodes with mobilizer to move in search of energy and recharge from remote energy station. In this paper we present and analyze a new harvesting aware framework for mobile sensor networks with remote energy station. The framework consists of energy model, motion control system and data transfer protocol. Among them, the objective of our data transfer protocol is to route a data packet geographically towards the target region and at the same time balance the residual energy and the link connectivity on nodes with energy harvesting. Our results along with simulation can be used for further studies and provide certain guideline for realistic development of such systems.

• 한국물환경학회지
• /
• 제31권3호
• /
• pp.328-333
• /
• 2015

In this study, Mg-Sericite was used as a flocculant to harvest freshwater microalgae, Chlorella. vulgaris. Mg-Sericite separated successfully >95% of the C. vulgaris at the following optimal parameters: Mg/Si mol ratio 1.25 to 1.50, mixing time of 20 min and settling time of 20 min. The harvesting efficiency was pH dependent. The highest harvesting efficiency ($99{\pm}0.3%$) was obtained at Mg/Si mol ratio 1.5 and pH 9 to 11. These results indicated that a biopolymer, Mg-Sericite, can be a promising flocculant due to its high efficiency, low dose requirements, short mixing and settling times. This harvesting method is helpful to lower the production cost of algae for biodiesel.

• 한국환경복원기술학회지
• /
• 제10권1호
• /
• pp.9-15
• /
• 2007

The study was conducted to find out the harvesting time, storage duration, cold treatment and sterilization on seed germination of Miscanthus sinensis. The optimum harvesting time of the Miscanthus seed in native to Jeju island was December. And the seed germination passible 3 years after harvesting. When the seeds had cold treatment, seed germination nate was 74% rather than 63% of non-treatment. For seed sterilization treatment, soaking in solution of Benomyl 7% during from 3 hours to 12 hours germinated 9% over. But the non-treatment on 24 hours treatment reduced the seed germination of Miscanthus sinensis.

• 한국세라믹학회지
• /
• 제53권2호
• /
• pp.167-170
• /
• 2016

Various piezoelectric nanostructures have been extensively studied for competitive energy harvesting applications. Here, GaN nanowires grown by a nonconventional magnetic field-assisted chemical vapor deposition process were investigated to characterize the piezoelectric energy harvesting characteristics. As a controlling parameter, only the growth time was changed from 15 min to 90 min to obtain different crystallinity and morphology of the nanowires. Energy harvesting characteristics were found to depend largely on the growth time. A longer growth time tended to lead to an increased output current, which is reasonable when considering the enhanced charge potentials and crystallinity. A maximum output current of ~14.1 nA was obtained for the 90 min-processed nanowires.

• 한국환경농학회지
• /
• 제38권4호
• /
• pp.314-320
• /
• 2019

BACKGROUND: As consumption of unripe mandarin increases, its cultivation has increased in open field cultivation areas. Because unripe mandarin must be harvested before ripening and color change, the optimum harvest time must be determined. This study investigated the effect of the harvest season on the yield of unripe fruit and biennial flowering of 'Miyagawa' satsuma mandarin. METHODS AND RESULTS: Two areas of unripe mandarin orchard were selected, and the yield, fruit growth, working time, and flowering of trees the following year were investigated. Fruit was harvested at 40, 60, 80, 100, and 120 days after full bloom and at general ripening. Fruit yield of unripe mandarin increased with later harvest time from 100^th to 120^th day except normal ripening. The next year, biennial occurred with normal ripening and harvesting, but not at the 120^th day after full bloom. At the 40^th day (earliest harvest time), summer and autumn shoots were present, but not after the 100^th day. The 40^th day required the most harvesting time; because the time gradually decreased with later harvest, the harvest time was shortest on the 120^th day, and general ripening occurred shortly after the 120^th day. CONCLUSION: Harvesting of unripe mandarin 100-120 days after full bloom was ideal to reduce harvesting time, enhance yield, and enable flowering the following year.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.197-197
• /
• 2017

In order to reduce the loss of perilla seeds at harvesting stage, different seeding methods and harvesting time had been applied to upland soil in NICS (National Institute of Crop Science), RDA, Milyang, Korea. The seeding methods were divided into hill and drill seeding, and harvesting time were 40%, 60%, 80%, and 100% color-changing of top cluster perilla (cv Deulsaem) seeds. Higher plant height and lowest flower cluster, thinner culm thickness was observed in drill seeding treated plot than hill seeding treated plot. However, field lodging occurred lower at drill seeding treatment (lodging degree 3) than hill seeding plot (lodging degree 5). Harvesting time affected the loss of perilla seeds and the loss rate of perilla seeds were investigated at different color-changing of top flower cluster. When seeds were harvested at 40%, 60%, 80%, and 100% color-changing of top cluster perilla seeds, the loss rate of hill and drill seeding showed no significant differences however the loss rated of 40, 60, 80, and 100 % color-changing of top flower cluster were 1.9% to 3.0%, 3.8% to 3.9%, 8.0% to 10.2%, and 16.1% to 22.7%, respectively. The harvesting time had no significant effects on the yield of perilla seeds. These results suggest that optimum harvesting time of perilla could be recommend at the 60% color-changing of top cluster to reduce the loss of perilla seeds.

• Journal of information and communication convergence engineering
• /
• 제10권4호
• /
• pp.359-364
• /
• 2012

Harvesting energy from the environment is essential for many applications to slow down the deterioration of energy of the devices in sensor networks and in general, the network itself. Energy from the environment is an inexhaustible supply which, if properly managed and harvested from the sources, can allow the system to last for a longer period - more than the expected lifetime at the time of deployment, or even last indefinitely. The goal of this study is to develop a simple algorithm for ns-2 to simulate energy harvesting in wireless sensor network simulations. The algorithm is implemented in the energy module of the simulator. Energy harvesting algorithms have not yet been developed for ns-2. This study will greatly contribute to the existing knowledge of simulating wireless sensor networks with energy harvesting capabilities in ns-2. This paper will also serve as a basis for future research papers that make use of energy harvesting.

• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.629-634
• /
• 1998

Factory-style plant production system aims to produce the standardized horticultural products with high quality and cleanness. In Korea, researches for year-round leaf vegetables production system are in progress and the most of them are focused on environment control. Automating technologies for harvesting, transporting and grading need to be developed. A lettuce harvesting system applicable to the plant factory was studied. It was composed of an articulated robot with a cutter and a gripper, lettuce feeding conveyor and air blower. Success rate of the developed system was 94.7 %. The system carried out harvesting a lettuce smoothly and the harvesting time was about 6 seconds per lettuce. The results showed a feasibility of robotic lettuce harvesting.