• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.104-105
• /
• 2002

Hyper-Rayleigh scattering(HRS)방법을 이용하여 쌍극자와 새로이 합성된 팔중극자들의 1차 초분극율 $\beta$를 측정하였다. External reference 법을 이용하였고, reference 물질로는 잘 알려져 있는 쌍극자인 PNA를 이용하여 Disperse Red 1과 팔중극자들의 1차 초분극율 $\beta$의 값을 구하였다. 또한 HRS 의 세기뿐만 아니라 이들 물질의 two-photon induced fluorescence 스펙트럼을 측정하였다. 1차 초분극율 $\beta$값은, 먼저 시료로부터 scattering 된 신호를 파장변화에 따른 스펙트럼으로 측정하여 two-photon induced fluorescence를 뺀 순수한 HRS 신호만을 이용하고, 실험에 사용된 물질들은 532nm에서 흡수가 있어 second harmonic generation 신호가 시료에 의해 흡수가 되므로 흡수효과를 식 $I_{2{\omega}}$(obs)= $I_{2{\omega}}$(true) $e^{-{\sigma}lN}$ ---(1)를 이용하여 흡수에 의한 신호의 감소 효과를 보정하여 값을 구했다. (중략)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.6
• /
• pp.491-496
• /
• 2010

The relaxation behavior of aligned electric dipoles in a mixed polymer of P2ANS with P(VDF-TrFE) is studied with optical second harmonic generation (SHG). In this work, a macroscopic noncentrosymmetry of the spin coated film was achieved by an electrical poling. The relaxation of induced polar order of nonlinear optic(NLO) chromophores after poling leads to an insufficient long-term stability of NLO properties. In this work, we develop a new technique to suppress such kind of dipole relaxation in a poled polymer. We found that the poled dipoles in a NLO polymer were effectively immobilized by the internal electric field created by a thermally annealed ferroelectric polymer. The long-term stability in a mixed system of NLO polymer/ferroelectric polymer was successively accomplished by a series of thermal treatments applied to the mixed polymer system at a temperature of $140^{\circ}C$ for at least 1hour after poling.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.216-217
• /
• 2010

This paper presents a new software-based on-line dead-time compensation technique for single-phase grid-connected photovoltaic (PV) inverter system. To improve the mitigation of dead-time effect around the zero-crossing point of phase current, a selective harmonic elimination of instantaneous feedback current is used as an additional part of conventional current control scheme. Simulation and experimental results are shown to verify the effectiveness of proposed compensation method in the grid-connected power distributed generation systems.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2013

Ultrasonic guided wave techniques have been widely used for long range nondestructive detection in tube-like structures. The present paper investigates the ultrasonic linear and nonlinear parameters for evaluating the thermal damage in aluminum pipe. Specimens were subjected to thermal loading. Flexible polyvinylidene fluoride (PVDF) comb transducers were used to generate and receive the ultrasonic waves. The second harmonic wave generation technique was used to check the material nonlinearity change after different heat loadings. The conventional linear ultrasonic approach based on attenuation was also used to evaluate the thermal damages in specimens. The results show that the proposed experimental setup is viable to assess the thermal damage in an aluminum pipe. The ultrasonic nonlinear parameter is a promising candidate for the prediction of micro-damages in a tube-like structure.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.78-83
• /
• 2001

It's required mechanical properties of in-service facilities to maintain safety operation in power plants as well as chemical plants. In this study the four classes of the thermally aged 1Cr-1Mo-0.25V specimens were prepared using an artificially accelerated aging method at $630^{\circ}C$. Ultrasonic tests, tensile tests, $K_{IC}$ tests and hardness tests were performed in order to evaluate the degree of degradation of the material. The mechanical properties were decreased as degraded, but the attenuation coefficient and the harmonic generation level of a ultrasonic signal were increased. Expecially the nonlinear parameter of the signal is sensitive and will be a good parameter to evaluate the material degradation.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.128-132
• /
• 2013

L-Arginine semi-oxalate (LASO) single crystal has been grown by solution growth technique at room temperature. The crystal structure and lattice parameters were determined for the grown crystal by single crystal X-ray diffraction studies. Photoluminescence studies confirm the violet fluorescence emission peak at 395 nm. Optical constants like band gap, refractive index, reflectance, extinction coefficient and electric susceptibility were determined from UV-VIS-NIR spectrum. The dielectric constant, dielectric loss and ac conductivity of the compound were calculated at different temperatures and frequencies to analyze the electrical properties. The solid state parameters such as plasma energy, Penn gap, Fermi energy and polarizability were calculated to analyze second harmonic generation (SHG). Nonlinear optical property was discussed to confirm the SHG efficiency of the grown crystal.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.365-366
• /
• 2015

Shunt active power filter is a complete current source which can provide an effective and adjustable solution for elimination of harmonic currents in power system. Its performance depends on strategy employed in reference current generation, control technique and topology of converter used in the design.[1-2]. In this paper Three Phase Six switch Z-source rectifier with active power filtering capability based on instantaneous reactive power theory is described. Thanking to the theory power factor and THD value are significantly improved. Experiment results and conclusions are presented.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1269-1278
• /
• 2018

Using the thawed Gaussian wave packets [E. J. Heller, J. Chem. Phys. 62, 1544 (1975)] and the adaptive reinitialization technique employing the frame operator [L. M. Andersson et al., J. Phys. A: Math. Gen. 35, 7787 (2002)], a trajectory-based Gaussian wave packet method is introduced that can be applied to scattering and time-dependent problems. This method does not require either the numerical multidimensional integrals for potential operators or the inversion of nearly-singular matrices representing the overlap of overcomplete Gaussian basis functions. We demonstrate a possibility that the method can be a promising candidate for the time-dependent $Schr{\ddot{o}}dinger$ equation solver by applying to tunneling, high-order harmonic generation, and above-threshold ionization problems in one-dimensional model systems. Although the efficiency of the method is confirmed in one-dimensional systems, it can be easily extended to higher dimensional systems.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.7
• /
• pp.607-612
• /
• 1996

A series of new NLO-active poly(4-nitrophenylallylamine) derivatives was synthesized by the nucleophilic substitution reaction of several substituted 4-nitrohalobenzenes and poly(allylamine hydrochloride). All polymers obtained were amorphous and their glass transition temperatures (Tg) were observed around 148-160 ℃. For each of these polymers, their specific Tg values were dependent on characteristic electronic structures. UV-visible absorption spectra showed maximum absorption intensity at 355-393 nm for π-π* transition of alkylaminonitrophenyl groups. The χ(2)value of poly(4-nitrophenylallylamine), as determined by the second harmonic generation at 1064 nm, for a thin polymer film poled at an elevated temperature, was 1.4x10-8esu. The third-order NLO properties of poly(4-nitrophenylallylamine) derivatives were evaluated through measurement of degenerate four-wave mixing technique and χ(3) coefficient in the range of 2.7~3.2x10-12 esu at 602 nm was found with 400 fs laser pulses.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.867-876
• /
• 2019

Second harmonic generation using nonlinear ultrasonic waves have been shown to be an early indicator of possible fatigue damage in nuclear power plant components. This technique relies on measuring amplitudes, making it highly susceptible to variations in transducer coupling and instrumentation. This paper proposes an experimental procedure for in-situ surface wave nonlinear ultrasound measurements on specimen with permanently mounted transducers under high cycle fatigue loading without interrupting the experiment. It allows continuous monitoring and minimizes variation due to transducer coupling. Moreover, relations describing the effects of the measurement system nonlinearity including the effects of the material transfer function on the measured nonlinearity parameter are derived. An in-situ high cycle fatigue test was conducted using two 304 stainless steel specimens with two different excitation frequencies. A comprehensive analysis of the nonlinear sources, which result in variations in the measured nonlinearity parameters, was performed and the effects of the system nonlinearities are explained and identified. In both specimens, monotonic trend was observed in nonlinear parameter when the value of fundamental amplitude was not changing.