• 한국지반공학회논문집
• /
• 제33권4호
• /
• pp.17-24
• /
• 2017

지진과 같은 외부 하중하에서 CFRD 거동은 사력존의 전단파 속도(또는 전단 탄성계수)분포에 큰 영향을 받는다. 일반적으로 사력존의 전단파 속도 분포는 주상도의 형태로 표면파 시험과 같은 비파괴 시험에 의해 결정될 수 있다. 이때 한정된 수의 실험에서 결정된 전단파 속도 주상도에는 불확실성이 존재하며, 이러한 불확실성은 사력존에 존재하는 물성치 공간 변동성에 의해 발생하게 된다. 내진 해석과 같은 다양한 해석에서 물성치 변동성에 의해 발생할 수 있는 해석 결과의 불확실성은 신뢰성 기반 해석을 통해 고려될 수 있다. 신뢰성 기반해석에서는 재료 물성치의 변동계수 결정을 통해 이러한 불확실성을 해석에 반영한다. 본 연구에서는 국내 CFRD 사력존을 위한 전단파 속도변동계수를 결정하였다. 이를 위해 국내 CFRD 사력존에서 결정된 전단파 속도 주상도들과 하모닉 웨이브릿 해석에 기반한 기법을 사용하여 국내 CFRD 사력존에 존재 가능한 600개의 전단파 속도 주상도를 생성하고 이를 이용하여 사력존 전단파 속도 분포의 깊이별 변동계수를 결정하였다.

• Geomechanics and Engineering
• /
• 제19권1호
• /
• pp.11-20
• /
• 2019

The use of electrokinetic dissipation method to study the fluid flow law in micro-pores is of great significance to reservoir rock microfluidics. In this paper, the micro-capillary theory was combined with the coupling model of the seepage field and the current field under the excitation of the harmonic signal, and the coupling theory of the electrokinetic effect under the first-order approximation condition was derived. The dissipation equation of electrokinetic dissipation and viscous resistance dissipation and its solution were established by using Green's function method. The physical and mathematical models for the electrokinetic dissipation of reservoir rocks were constructed. The microscopic mechanism of the electrokinetic dissipation of reservoir rock were theoretically clarified. The influencing factors of the electrokinetic dissipation frequency of the reservoir rock were analyzed quantitatively. The results show that the electrokinetic effect transforms the fluid flow profile in the pores of the reservoir from parabolic to wavy; under low-frequency conditions, the apparent viscosity coefficient is greater that one and is basically unchanged. The apparent viscosity coefficient gradually approaches 1 as the frequency increases further. The viscous resistance dissipation is two orders of magnitude higher than the electrokinetic effect dissipation. When the concentration of the electrolyte exceeds 0.1mol/L, the electrokinetic dissipation can be neglected, while for the electrolyte solution (<$10^{-2}M$) in low concentration, the electrokinetic dissipation is very significant and cannot be ignored.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.149-155
• /
• 1997

We have successfully grown colorless and transparent Rb-doped potassium niobate (KRN) single crystals using the top seeded solution growth(TSSG) technique. In our crystal growth experiments, the Rb doping concentrations within the melt range from 2-15 mol% relative to that of Nb$_2$O5. Atomic absorption measurements indicate that the Rb content in the KRN solid solution is rather low; the Rb segregation coefficient is found to be on the order of 0.05. It is believed that this is due to the relatively much larger Rb+ ionic radius compared to that of K+, rendering it more difficult for Rb to replace K in the KNbO$_3$(KN) host lattice. Preliminary single-pass second harmonic generation (SHG) experimental results indicate that there exists marginal improvement in the phase-matching temperature tolerance of KRN compared to that of pure Kn single crystals.

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1142-1149
• /
• 2003

The present study describes a numerical analysis for simulation of the sloshing of flows with free-surface which contained in a rectangular tank moving in harmonic or pitching motion. The VOF function, representing the volume fraction of a cell occupied by the fluid, is calculated for each cells, which gives the location of the free-surface filling any some fraction of cells with fluid. The time-dependent changes of free-surface height are used for visualization subject to several conditions such as fluid height, horizontal acceleration, sinusoidal motion, and viscosity. The free-surface heights were used for comparing wall-force, which is caused by sloshing of flows. Damping effects by baffles were extensively investigated for various conditions in terms of baffle shape and position.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2002년도 11월 학술대회지
• /
• pp.133-136
• /
• 2002

The purpose of this study was to determine the correlation between the Average Fundamental Frequency, Fo-Tremor Frequency, Jitter, Shimmer, Amplitude Tremor Intensity Index, and Noise to Harmonic Ratio of MDVP and Fo, Fo Tremor, Jitter, Shimmer, Amp Tremor, HNR, and NNE of Dr. Speech. The Pearson correlation coefficient was used for analysis. The results showed that there was a strong correlation between Fo and Shimmer of both instruments. However, the remaining parameters did not show a significant correlation.

• 한국유체기계학회 논문집
• /
• 제1권1호
• /
• pp.49-57
• /
• 1998

The acoustic signatures from a propeller fan under non-uniform inlet flow conditions were measured to reveal the mechanism for tonal radiation. Experimental studies were carried out by generating non-uniform turbulent flows with circumferential and radial components of harmonic incoming gust deliberately. This paper reports the measured acoustic power exponents and cross-spectra for circumferential and radial disturbances at a specified flow-rate coefficient.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.985-986
• /
• 2011

This paper deals with d-q axis equivalent circuit analysis of IPMSM(Interior Permanent Magnet Synchronous Motors) considering voltage harmonics. In the field weakening region, as the current vector angle increased, back-emf contains large harmonics, therefore, significant underestimation of voltage or overestimation of speed can be occurred from the conventional d-q axis equivalent circuit analysis. In order to consider the effects of voltage harmonics, a harmonic coefficient is introduced and verified by experiments.

• 전기학회논문지P
• /
• 제62권2호
• /
• pp.65-71
• /
• 2013

Nonlinear loads with harmonics exist in an actual power system where harmonic currents make voltage distortion. The sum of reactive power measured at individual load is different from the measured reactive power at a bus in a power system with linear and non-linear loads. In this study, ANN(artificial neural network) load modeling technique with consideration of harmonics is introduced for more accurate component load modeling and an impact coefficient is proposed for aggregation of component loads. Results of this research show more accurate load modeling method. Since precise data for power system analysis can be acquired, the proposed method will be used for power system planning and maintenance.

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.510-514
• /
• 2009

This paper presents the coupled analysis method to calculate the temperature rise in a gas insulated busbar (GIB). Harmonic eddy current analysis is carried out and the power losses are calculated in the conductor and enclosure tank. Two methods are presented to analyze the temperature distribution in the conductor and tank. One is to solve the thermal conduction problem with the equivalent natural convection coefficient and is applied to a single phase GIB. The other is to employ the computational fluid dynamics (CFD) tool which directly solves the thermal-fluid equations and is applied to a three-phase GIB. The accuracy of both methods is verified by the comparison of the measured and calculated temperature in a single phase and three-phase GIB.

• Journal of Ship and Ocean Technology
• /
• 제1권1호
• /
• pp.15-25
• /
• 1997

A series of towing tank tests were carried out for 18 full ship models of high block coefficients. The resistance coefficients and wake distribution at the propeller plane were measured and carefully examined. Regression analysis was employed to find out the relationships with the hull form parameters. Equations for wave resistance coefficient, form factor, and nominal wake are given. A harmonic analysis of measured wake was performed to look into the influence of the local stern shape on the magnitude of fluctuating wake components at three different radii. The amplitude of wake harmonics was also expressed by regression quations. It was found that the regression formulas were very useful in estimating resistance and circumferential wake characteristics of full ship models. It was also considered that the formulas presented in this paper could be utilized in the hull form improvement in a preliminary design.