• 펄프종이기술
• /
• 제48권3호
• /
• pp.44-50
• /
• 2016

As a raw material for pulp and paper industry, Moso bamboo, Timber bamboo and Henon bamboo pulps were prepared by soda or soda-anthraquinone(Soda-AQ) pulping process. Soda-AQ pulp yields was higher in Henon bamboo (43.2%) than in Moso bamboo or Timber bamboo (32.7-39.2%), but quite lower than hardwood species. In Kappa number comparison, Henon bamboo pulp showed lower (16.6) with 50 min cooking to $170^{\circ}C$ than that of Moso bamboo (22.8) and Timber bamboo (18.9) with 90 min cooking to $170^{\circ}C$. Fiber length of Timber bamboo soda pulp had higher (1.46 mm) than that of Moso bamboo or Henon bamboo (1.18-1.36 mm). All three bamboo pulps showed longer average fiber length than commercial hardwood pulp. With higher pulp yield and lower Kappa number, Henon bamboo is better raw material for pulp than Moso bamboo and Timber bamboo.

• The Korean Journal of Ecology
• /
• 제4권1_2호
• /
• pp.38-51
• /
• 1981

The present investigation was estimated the effect of temperature, precipitatiion, and time on the decomposition of litters with litter bags of Pinus densiffora and Quercus mongolica at Gure where elevation in 50m, and at Nogodan where elevation in 1300m on Mt. Jiri. As the above results, decomposition model was proposed to relation of the environmental conditions. And was investigated the production and decomposition of litters from the stands of various forest communities in Kwangneung, Mt. Jiri and Mt. Halla. The results are as follows; The models for the decay of organic carbon (C) was as follows: $C=Coe^{-Kt}$ (limiting factor;time) $C=Coe^{-K'te}$ (limiting factor;tempedrature) $C=Coe^{-KnP}$ (limiting factor:precipitation) As observed in litter bag method, the decomposition rate of litter in Pinus densiflora was slower than that of Quercus mongolica. The higher elevation, the slower decomposition rate. The decomposition of litters at Gure where elevation in 50m was equally influenced by temperature and precipitation. But at Nogodan where elevation in 1300m was much inflenced by precipitation. The decay constant of litters was larger in hardwood forest than in coniferous forest. In the same species, the more elevatiion, the less decomposition constant. The time required for the decay of 50%, 95^, 99% of the accumulated litters in the forest floor were faster in hardwood forest than in coniferous forest. In the same species, the higher elevatiion, the longer time required.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.450-457
• /
• 2020

Single pellet press technology allows for fast, low-cost, and small-scale tests to investigate pelletizing characteristics. We estimated proper compression ratios for five Korean domestic wood species through predicted relationships between pelletizing pressure P_x and compression ratio based on experimental data obtained from a single pellet press unit. The pressures required to obtain a 6-mm-diam pellet of density 1200 kg/㎥ were estimated as 111 MPa for Populus davidiana, 133 MPa for Robinia pseudoacacia, 136 MPa for Quercus mongolica, 97 MPa for Pinus densiflora, and 127 MPa for Pinus rigida. On the basis of these pressures, we estimated proper compression ratios to be within the range 7.676-8.410 for these species, and we found the compression ratios needed for hardwood species to be somewhat higher than those needed for softwood species to obtain the pellet density of 1200 kg/㎥.

• 한국습지학회지
• /
• 제4권2호
• /
• pp.13-22
• /
• 2002

Difference of the inset diversity and community structures between the bog Hwaeom-neup and its surrounding forest of Mt. Wonhyo-san located at Yangsan were investigated. Overall 15 orders, 87 families, 204 genera and 233 species were identified. Hydrophilic Harpalidae species were observed in small number at the bog, while the insect species representing hardwood forest were also collected at the bog. Species diversity was relatively higher at the forest (H'=4.80) than at the bog (H'=4.10). The dominant species was Diplous depressus (Gebler) both at bog as well as at forest. Ground-walking Coleoptera as Carabus sternbergi stembergi Roeschke, Damaster jankowskii jankowskii (Oberthur) and D. depressus was spread from forest into bog. Longhorn beetles Leptura arcuata Panzer and Chlorophorus diadema (Motschulsky) being characteristic species of shrub forest were also observed spreading into bog. It was consequently suggested that the bog was in part progressed into dry succession and its boundary was not clearly defined with forest at least upon the structure of insect commnunity.

• 농업과학연구
• /
• 제37권3호
• /
• pp.465-469
• /
• 2010

In order to develop effective recycling technologies of disused railway wood ties, wood properties and residual creosote oil of wood ties were investigated. Among the total 50 wood ties, 32 wood ties were identified as tropical hardwood tree, such as, Keruing (Dipterocarpus spp.), Kempas (Koompassia malaccensis), Kapur (Dryobalanops spp.) Naytoh (Palaquium rostratum), and so on. Disused wood ties showed mostly sound structure without degradation of cell walls by decay fungi. Disused wood ties showed high strengths of bending and compressive parallel to grain because degradation of wood properties was hardly occurred in use under exterior condition. Disused railway wood ties had relatively poor depth of penetration and residual of creosote oil because of refractory wood structures. These results suggest that disused railway wood ties may be useful as recycling wood wastes.

• 한국산림과학회지
• /
• 제96권2호
• /
• pp.222-226
• /
• 2007

This study developed the Korean roundwood import prediction model using vector autoregressive (VAR) method. The roundwood was divided into softwood and hardwood by species. The VAR model of roundwood import was specified with two lagged endogenous variables, that is, roundwood import volume and roundwood import price. The results showed that the significance levels of F-statistics in the softwood and hardwood roundwood import equations rejected the hypothesis that all coefficients are zero. So, we concluded that roundwood import volume can be explained by lagged import volume and lagged import price in Korea. The coefficient signs of all variables were as expected. Also, the model has good explanatory power, and there is no autocorrelation.

• Journal of Forest and Environmental Science
• /
• 제26권2호
• /
• pp.75-82
• /
• 2010

The biometry, morphological properties and chemical composition of bagasse, corn, sunflower, rice, and rapeseed residues plants were analyzed. The results revealed differences in biometry properties and chemical composition of the different types of agricultural resides investigated. The greatest proportion of fiber length (1.32 mm) and cellulose (55.56%) was found in residues of bagasse plants, with a low ash (1.78%) and lignin (20.5%). The lignin of all types of agricultural resides was less than hardwood and softwood. In addition, the rice and rapeseed residues plants had highest amount of ash and extractive component. The slenderness and flexibility ratios of the all types of agricultural resides fibers were similar to some of hardwood and softwood species.

• Journal of Ecology and Environment
• /
• 제38권4호
• /
• pp.405-413
• /
• 2015

We classified the streamside plant community by phyto-sociological method and analyzed the relationship between environment factors and vegetation structure by using the classification and ordination method. We found that twenty one plant communities were classified according to dominant species at the natural streamside valley forest with surveying the 65 quadrats (10 m × 10 m). From the survey results, the hardwood plant communities were classified as streamside valley forest and the softwood plant communities as riparian forest according to the degree of flooding. The valley forest had a distribution of 17 plant communities which was 65% (42 quadrats) of 65 quadrats: Maackia amurensis community, Betula davurica community, Quercus variabilis community, Pinus densiflora community, Q. serrata community, Prunus sargentii community, and Meliosma oldhamii community etc. The riparian forest had a distribution of four plant communities which was 35% (23 quadrats) of 65 quadrats: Salix koreensis community, S. rorida community, S. purpurea var. japonica community, and S. glandulosa community, etc. From the two-way indicator species analysis (TWINSPAN) analysis, we found indicator species Oplismenus undulatifolius and Lindera obtusiloba for the streamside valley forest and Humulus japonicus, Phragmites japonica, and S. koreensis for the riparian forest. From the results of the canonical correspondence analysis (CCA), coordinates, altitude, and stream structure showed low correlation to the distribution of the plant community. Therefore, it seemed that valley forest and riparian forest were distinguished by the stream gradient and waterway width which determined by the stream water level.

• 한국가구학회지
• /
• 제28권3호
• /
• pp.248-258
• /
• 2017

A study was carried out to observe the 1% aqueous safranine solution flow speed in longitudinal and radial directions of softwood Thuja orientalis L., diffuse-porous wood Gmelina arborea Roxb., and ring-porous wood Phellodendron amurense Rupr., Longitudinal flow was considered from bottom to top while the radial flow was considered from bark to pith directions. In radial direction, ray cells and in longitudinal direction tracheids, vessel and wood fiber were considered for the measurement of liquid penetration speed at less than 12% moisture contents(MC). The variation of penetration speed for different species was observed and the reasons behind for this variation were explored. The highest radial penetration depth was found in ray parenchyma of T. orientalis but the lowest one was found in ray parenchyma of P. amurense. The average liquid penetration depth in longitudinal trachied of T. orientalis was found the highest among all the other cells. The penetration depth in fiber of G. arborea was found the lowest among the other longitudinal cells. It was found that cell dimension and also meniscus angle of safranine solution with cell walls were the prime factors for the variation of liquid flow speed in wood. Vessel was found to facilitate prime role in longitudinal penetration for hardwood species. The penetration depth in vessel of G. arborea was found highest among all vessels. Anatomical features like ray parenchyma cell length and diameter, end-wall pits number were found also responsible fluid flow differences. Initially liquid penetration speed was high and the nit gradually decreased in an uneven rate. Liquid flow was captured via video and the penetration depths in those cells were measured. It was found that even in presence of abundant rays in hardwood species, penetration depth of liquid in radial direction of softwood species was found high. Herein the ray length, lumen area, end wall pit diameter determined the radial permeability. On the other hand, vessel and fiber structure affected the longitudinal flow of liquids. Following a go-stop-go cycle, the penetration speed of a liquid decreased over time.

• Journal of Plant Biotechnology
• /
• 제37권4호
• /
• pp.343-356
• /
• 2010

Plant micropropagation techniques include bud cultures using apical or axillary buds, organogenesis through callus culture or adventitious bud induction, and somatic embryogenesis. In Korea Forest Research Institute (KFRI), the first tissue culture trial in woody plant was initiated from the bud culture of hybrid poplars (Populus alba x P. glandulosa) in 1978. Since then several mass propagation techniques have developed from conifer and hardwood species, resulting in allowing practical application to Poplars, Birches and some oak species. In addition, useful micropropagation and genetic resources conservation techniques were established in some rare and endangered tree species including Abeliophyllum distichum. Among various in vitro propagation techniques, somatic embryogenesis is known to be the most efficient plant regeneration system. Since the first somatic embryo induction was reported in Tilia amurensis by KFRI in 1986, various protocols for direct or indirect somatic embryogenesis systems have developed in conifer and hardwood species including Larix leptolepis, Pinus rigida x P. taeda F1, Kalopanax septemlobus and Liliodendron tulipifera, etc. However, most of these technologies have been developed using juvenile tissues, i.e. immature zygotic embryos or mature embryos. Therefore it has been difficult to directly application to tree breeding program due to their unproven genetic background. Recently remarkable progresses and new approaches have been achieved in mature tree somatic embryogenesis. In this article we reviewed several micropropagation techniques, which have been mainly developed by KFRI and recent international progresses.