• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.181-188
• /
• 2011

A simulation technique, which simulate dynamic motion and communication environments of ship in the lab, is needed in order to reduce the testing cost when we evaluate the transfer alignment performance of shipboard INS. Hardware-In-the-Loop Simulation(HILS) can be used as an effective test method for those system because it can provide flexible and realistic simulation environments, various test scenario, and repeated test environment in the lab without additional cost and person. This paper presents the methods for implementing the real time HILS environment for testing transfer alignment performance of shipboard INS. It includes real time executive for controlling realtime simulation and calculating the ship motion, communication method for interfacing between the systems, and coordinate transformation method for converting real ship coordinate attitude data to lab coordinate attitude data.

• Journal of Mechanical Science and Technology
• /
• 제19권11호
• /
• pp.1998-2006
• /
• 2005

The lane departure avoidance systems have been considered promising to assist human drivers in AVCS (Advanced Vehicle Control System). In this paper, a lane departure monitoring and control system is developed and evaluated in the hardware-in-the-loop simulations. This system consists of lane sensing, lane departure monitoring and active steering control subsystems. The road image is obtained based on a vision sensor and the lane parameters are estimated using image processing and Kalman Filter technique. The active steering controller for avoiding the lane departure is designed based on the lane departure metric. The proposed lane departure avoidance system is realized in a steering HILS (hardware-in-the-loop simulation) tool and its performance is evaluated with a driver in the loop.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.435-440
• /
• 2013

In this paper, a design method of the simulation program for HILS(Hardware-In-the-Loop Simulation) system is proposed. The present method consists of definition of requirements for HILS, development of specifications, and implementation of the program to satisfy the specifications. In the implementation of the program, the application of hardware interface and the concept of structural modularization are proposed to satisfy the specifications. The concepts of CSCI(Computer Software Configuration Item) and encapsulation are used for structural modularization. The proposed method was practically applied to the development of the simulation program for the efficient operation in HILS of an anti-ship missile system.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.203-209
• /
• 2007

As the vehicle electronic control technology quickly grows and becomes more sophisticated, a more efficient means than the traditional in-vehicle driving test is required for the design, testing, and tuning of electronic control units (ECU). For this purpose, the hardware-in-the-loop simulation (HILS) scheme is very promising, since significant portions of actual driving test procedures can be replaced by HIL simulation. The HILS incorporates hardware components in the numerical simulation environment, and this yields results with better credibility than pure numerical simulations can offer. In this study, a HILS system has been developed for ESP (Electronic Stability Program) ECUs. The system consists of the hardware component, which that includes the hydraulic brake mechanism and an ESP ECU, the software component, which virtually implements vehicle dynamics with visualization, and the interface component, which links these two parts together. The validity of HIL simulation is largely contingent upon the accuracy of the vehicle model. To account for this, the HILS system in this research used the commercial software CarSim to generate a detailed full vehicle model, and its parameters were set by using design data, SPMD (Suspension Parameter Measurement Device) data, and data from actual vehicle tests. Using the developed HILS system, performance of a commercial ESP ECU was evaluated for a virtual vehicle under various driving conditions. This HILS system, with its reliability, will be used in various applications that include durability testing, benchmarking and comparison of commercial ECUs, and detection of fault and malfunction of ESP ECUs.

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.905-912
• /
• 2010

Modern version of advanced supersonic fighter have ATCS (Automatic Thrust Control System) to maximum flight safety, fuel efficiency and mission capability the integrated advanced autopilot system such as TFS (Terrain Following System), GCAS (Ground Collision Avoidance System) and AARS (Automatic Attitude Recovery System) and etc. This paper addresses the design and verification of ATCS based on advanced supersonic trainer in HILS (Hardware In the Loop Simulator) with minimum hardware modification to reduce of development cost and maintain of system reliability. The function of ATCS is consisted of target speed hold mode in UA (Up and Away) and angle of attack hold mode in PA (Power Approach). The real-time pilot evaluation reveals that pilot workload is minimized in cruise and approach flight stage by ATCS.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.184-191
• /
• 2003

HILS(Hardware-ln-the-Loop Simulation) is a scheme that incorporates hardware components of primary concern in the numerical simulation environment. Due to its advantages over actual vehicle test and pure simulation, HILS is being widely accepted in automotive industries as test benches for vehicle control units. Developed in this study is a HILS system for VDC(Vehicle Dynamics Control) with a valve control system that modulates the brake pressures at low wheels. Two VDC control logics were developed and tested in the HILS system. Test results under various driving conditions are presented in this paper.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.32.2-32.2
• /
• 2011

State dependent Riccati equation (SDRE) control technique has been widely used in the control society. Although it solves nonlinear optimal control problems, which minimizes state error and control efforts simultaneously, it has drawbacks when it is to be applied to the real time systems in that it requires much computational efforts. So the real time system whose computational ability is limited (for example, satellites) cannot afford to use SDRE controller. To solve this problem, a hybrid controller which is based on MSDRE (Modified SDRE) and ANFIS (Adaptive Neuro-Fuzzy Inference System) has been proposed by Abdelrahman et al. (2010). We propose a hybrid controller based on SDRE and ANFIS, and apply the hybrid controller to the hardware attitude simulator to perform a HIL (Hardware-In-the-Loop) simulation. Through HIL simulation, it is demonstrated that the hybrid controller satisfies the control requirement and the computation load is reduced significantly. In addition, the effects of statistical properties of the ANFIS training data to the performance of the ANFIS controller have been analyzed.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.240-248
• /
• 1999

This paper presents a lane-change collision avoidance control algorithm for autonomous vehicles that will be used in AHS(Automated Highway System). In the proposed control algorithm, nominal control inputs are generated by solving the inverse vehicle dynamic equations of motion for a lane-change maneuver. In addition, a corrective steering input from preview as well as DYC (Direct Yaw Moment Control) may be included to reduce unpredictable errors and to insure yaw directional stability, respectively. The performance of the algorithm is evaluated with an ABS HILS system which consist of 17 DOF vehicle model and real ABS hardware parts. The HILS simulation results show that the proposed algorithm may be used for emergency lane-change maneuvers for autonomous vehicles.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.112-116
• /
• 1992

In this paper, a fuzzy logic controller(FLC) is designed for the pointing loop of the spin-stabilized platform. For the fuzzy inference, a fuzzy accelerator board using the Togai InfraLogic software and digital fuzzy processor(DFP110FC) is designed, and a validation of an algorithm for fuzzy logic control is also presented. The pointing loop of the spin-stabilized platform using FLC has better performance of step responses than a proportional controller in case of same loop hain through the software simulation and the experiment of implemented hardware.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.421-422
• /
• 2020

Hardware In-the-Loop simulation(HIL)은 실제 하드웨어 시스템을 실시간 모사할 수 있는 시뮬레이션 장비로 연구 및 개발 기간의 단축, 비용저감 등의 장점을 앞세워 다양한 전력전자 분야에 사용되고 있다. 실제 하드웨어를 그대로 모사하는 것이 HIL의 목적이기 때문에 HIL 장비는 검증의 실시간성과 출력된 결과의 정확성이 무엇보다도 중요하다고 할 수 있다. 하지만 코어간의 데이터를 주고받는 과정에서 HIL의 연산 속도 및 정확성을 저해하는 요인들이 발생하게 된다. 본 연구에서는 HIL 장비를 이용해 복잡한 시스템을 구현함에 있어서 연산속도 및 정확성을 저해하는 요인들을 찾아내고 이를 해결하기 위한 방법을 제안한다. 제안된 연산속도 개선 및 정확성 개선 방법의 타당성은 프로세서의 연산 속도 변화량, HIL 및 시험 결과 파형의 비교 분석을 통해 검증되었다.