• 한국통신학회논문지
• /
• 제22권3호
• /
• pp.454-468
• /
• 1997

This paper presents a bitwidth optimization algorithm for efficient hardware sharing in digital signal processing system. The proposed algorithm determines the fixed-point representation for each signal through bitwidth optimization to generate the hardware requiring less area. To reduce the operator area, the algorithm partitions the abstract operations in the design description into several groups, such that the operations in the same group can share an operator. The partitioning result are fed to a high-level synthesis system to generate the pipelined fixed-point datapaths. The proposed algorithm has been implemented in SODAS-DSP an automatic synthesis system for fixed-point DSP hardware. Accepting the models of DSP algorithms in schematics, the system automatically generates the fixed-point datapath and controller satisfying the design constraints in area, speed, and SNR(Signal-to-Noise Ratio). Experimental results show that the efficiency of the proposed algorithm by generates the area-efficient DSP hardwares satisfying performance constraints.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.166-168
• /
• 2006

This paper presents a speed control of AC servo system using LabVIEW program and cRIO (Compact RIO)hardware which is a real-time controller made in National Instruments company. LabVIEW is a GUI programming language easy to implement control system and cRIO is a reconfigurable hardware platform which is very simple. Therefore Lab VIEW and cRIO will be excellent tools to design and implement control system.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.474-479
• /
• 2004

This paper presents an economical solution of the control system of robot, which is widely applied to sophisticated robots. The proposed control system is built on a foundation that is combined between driver motor, PC controlled servo-motor control card, and driver software. The solution had been applied to design hardware of controlled 6-DOF (Degree Of Freedom) robot. The controlled system is used to control VML Robot (Vehicle Mechatronic Lab). Addition, because of flexibility of the solution, the controller can be suit with widely robots at used servo-moto.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2203-2205
• /
• 2002

In order to have the competitive power in control system economically, development of low price control system must be conducted. In this paper, we are tring to think over the integration of hardware using progammable logic controller for Turbine control system. The detailed contents are system's overview and integration of system and system redundant and power supply.

• 한국정밀공학회지
• /
• 제4권4호
• /
• pp.25-35
• /
• 1987

This paper deals with the design of the digital controller for DC servo motor, and it is implemented for the cartesian coordinate 4 axes manipulator. A design method of the controller is adopted an algorithm using the digital position locked loop(DPLL) method and the linear PID control for the smooth motion. To simplify the hardware configuration of control system, 8279 keyboard/display controller, Z-80 CTC counter and 8255 PPI are used. Therefore the design method to control each motor as real-time is presented. To show effectiveness of the design, the PWM circuit and frequency/voltage converter are applied for the velocity control of robot system. When the proposed controller is applied to the 4-axes manipulator, it reveals that the error probabilities of X, Y and Z axis as 0.033%, 0.023% and 0.028% respectively.

• Nuclear Engineering and Technology
• /
• 제29권2호
• /
• pp.167-174
• /
• 1997

The method that the operating condition of Control Rod Drive Mechanism (CRDM) can be monitored without mounting sensors within CRDM housing was developed, and by using this developed method the closed-loop controller for the CRDM was designed which can optimize the performance and maximize the reliability of CRDM operation. Neural network is utilized as pattern recognition engine in detecting CRDM actuation. In this paper, most problems in previous open loop system are resolved. The control algorithms for closed-loop system ore developed and implemented within the hardware of timing controller based on microprocessor. All functions in the timing controller ore verified by means of real time CRDM simulator. The results show that the timing controller performs its intended functions properly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.585-587
• /
• 1994

The chattering phenominon is the one of the problems on Variable Structure Controller(VSC). To alleviate this problem, Modified Variable Structure Controller(MVSC) with sliding sector is presented in this paper. This controller is adopted to the position drive system of brushless dc motor. For the simplification of hardware, the current controller also uses the sliding mode control method. Computer simulations are presented to show chattering alleviation of the proposed control scheme.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.351-357
• /
• 2007

SRM (Switched Reluctance Motor) has not been put into practical use since it has been developed in mid 19th centuries, but the switching element using semi-conductor was developed in 1950's which made possible to produce small size staffing motors. The research activities have been lively conducted regarding SRM since 1960's, nowadays, more research activities are being carried out focusing on developing small home appliances such as vacuum cleaners and washing machines. This thesis explains the study of controller design applied to SRM concept. This controller executes controller algorithms via $\mu$ - processor to increase stability and precise measurement, and VHDL (Very high speed integrated circuit Hardware Description Language) is designed to generate SRM driving signal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.406-409
• /
• 1997

An economical 4-axis CNC controller employing step motors is designed and implemented in this paper. By using the inherent ability of holding position of the motor, the CNC controller uses open-loop control for removing trajectory error and for a simple hardware. Each drive of axis has an 8-bit microprocessor 89C52 and a PC controls the axes and pendant by means of RS232C serial communication. Backlash is also compensated at the axis controller. While compensating the backlash, the feed rate becomes zero in order to minimize trajectory error. The trajectories of 16ms interval are computed on PC and are sent to motor drives. In the drives, the trajectories are linearly interpolated for 2ms interval. The developed CNC does not require add-on specific motion card on PC. From the experimental results, the validity of the CNC controller based on step motor is proved.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.848-854
• /
• 1999

In this paper, we designed and implemented a precise pulse motor controller chip that generates the pulse needed to control step motor, DC servo and AC servo motors. This chip generates maximum pulse output rate of 5Mpps and has the quasi-S driving capability and speed and moving distance override capability during driving. We designed this chip with VHDL and executed a logic simulation and synthesis using Synopsys tool. The pre-layout simulation and post-layout simulation was executed by Compass tool. This chip was produced with 100 pins, PQFP package by 0.8${\mu}{\textrm}{m}$ gate array process and implemented by completely digital logic. We developed the test hardware board of performance and the CAMC(Computer Aided Motor Controller) Agent softwate to test the performance of the pulse motor controller chip produced. CAMC Agent enables user to set parameters needed to control motor with easy GUI(Graphic User Interface) environment and to display the output response of motor graphically.