• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.1
• /
• pp.9-14
• /
• 2018

In this paper, we introduce an AES-based security chip for the embedded system of Internet of Things(IoT). We used Verilog HDL to implement the AES algorithm in FPGA. The designed AES module creates 128-bit cipher by encrypting 128-bit plain text and vice versa. RTL simulations are performed to verify the AES function and the theory is compared to the results. An FPGA emulation was also performed with 40 types of test sequences using two Altera DE0-Nano-SoC boards. To evaluate the performance of security algorithms, we compared them with AES implemented by software. The processing cycle per data unit of hardware implementation is 3.9 to 7.7 times faster than software implementation. However, there is a possibility that the processing speed grow slower due to the feature of the hardware design. This can be solved by using a pipelined scheme that divides the propagation delay time or by using an ASIC design method. In addition to the AES algorithm designed in this paper, various algorithms such as IPSec can be implemented in hardware. If hardware IP design is set in advance, future IoT applications will be able to improve security strength without time difficulties.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.611-620
• /
• 2011

Since card-type one-time password (OTP) generators became available, power and area consumption has been one of the main issues of hardware OTPs. Because relatively smaller batteries and smaller chip areas are available for this type of OTP compared to existing token-type OTPs, it is necessary to implement power-efficient and compact dedicated OTP hardware modules. In this paper, we design and implement a low-power small-area hardware OTP generator based on the Advanced Encryption Standard (AES). First, we implement a prototype AES hardware module using a 350 nm process to verify the effectiveness of our optimization techniques for the SubBytes transform and data storage. Next, we apply the optimized AES to a real-world OTP hardware module which is implemented using a 180 nm process. Our experimental results show the power consumption of our OTP module using the new AES implementation is only 49.4% and 15.0% of those of an HOTP and software-based OTP, respectively.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.820-822
• /
• 2007

ARIA and the Advanced Encryption Standard (AES) are next generation standard block cipher algorithms of Korea and the US, respectively. This letter presents an area-efficient unified hardware architecture of ARIA and AES. Both algorithms have 128-bit substitution permutation network (SPN) structures, and their substitution and permutation layers could be efficiently merged. Therefore, we propose a 128-bit processor architecture with resource sharing, which is capable of processing ARIA and AES. This is the first architecture which supports both algorithms. Furthermore, it requires only 19,056 logic gates and encrypts data at 720 Mbps and 1,047 Mbps for ARIA and AES, respectively.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.38-45
• /
• 2018

An integrated cryptographic processor that efficiently integrates ARIA, AES block ciphers and Whirlpool hash function into a single hardware architecture is described. Based on the algorithm characteristics of ARIA, AES, and Whirlpool, we optimized the design so that the hardware resources of the substitution layer and the diffusion layer were shared. The round block was designed to operate in a time-division manner for the round transformation and the round key expansion of the Whirlpool hash, resulting in a lightweight hardware implementation. The hardware operation of the integrated ARIA-AES-Whirlpool crypto-processor was verified by Virtex5 FPGA implementation, and it occupied 68,531 gate equivalents (GEs) with a 0.18um CMOS cell library. When operating at 80 MHz clock frequency, it was estimated that the throughputs of ARIA, AES block ciphers, and Whirlpool hash were 602~787 Mbps, 682~930 Mbps, and 512 Mbps, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.67-74
• /
• 2008

A compact and high-performance AES(Advanced Encryption Standard) encryption/decryption processor is designed by applying various hardware sharing and optimization techniques. In order to achieve minimized hardware complexity, sharing the S-Boxes for round transformation with the key scheduler, as well as merging and reusing datapaths for encryption and decryption are utilized, thus the area of S-Boxes is reduced by 25%. Also, the S-Boxes which require the largest hardware in AES processor is designed by applying composite field arithmetic on $GF(((2^2)^2)^2)$, thus it further reduces the area of S-Boxes when compared to the design based on $GF(2^8)$ or $GF((2^4)^2)$. By optimizing the operation of the 64-bit round transformation and round key scheduling, the round transformation is processed in 3 clock cycles and an encryption of 128-bit data block is performed in 31 clock cycles. The designed AES processor has about 15,870 gates, and the estimated throughput is 412.9 Mbps at 100 MHz clock frequency.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.6
• /
• pp.1065-1078
• /
• 2014

Considering the safety of the data and performance, it can be said that the performance of the AES algorithm in a symmetric key-based encryption is the best in the IPSec-based VPN. When using the AES algorithm in IPSec-based VPN even with the expensive hardware encryption card such as OCTEON Card series of Cavium Networks, the Performance of VPN works less than half of the firewall using the same hardware. In 2008, Intel announced a set of 7 AES-NI instructions in order to improve the performance of the AES algorithm on the Intel CPU. In this paper, we verify how much the performance IPSec-based VPN can be improved when using seven sets of AES-NI instruction of the Intel CPU.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.45-51
• /
• 2015

Recently, as WPAN (Wireless Personal Area Network) becomes the necessary feature in IoT (Internet of Things) devices, the importance of data security also hugely increases. In this paper, we present the low-complexity 128-bit AES-$CCM^*$ hardware IP for IEEE 802.15.4 standard. For low-cost and low-power implementation which is essentially required in IoT devices, we propose two optimization methods. First, the folded AES(Advanced Encryption Standard) processing core with 8-bit datapath is presented where composite field arithmetic is adopted for reduced hardware complexity. In addition, to support $CCM^*$ mode defined in IEEE 802.15.4, we propose the mode-toggling architecture which requires less hardware resources and processing time. With the proposed methods, the gate count of the proposed AES-$CCM^*$ IP can be lowered up to 57% compared to the conventional architecture.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.4
• /
• pp.739-751
• /
• 2019

Security in embedded devices has become a significant issue. Threats on the sup-ply chain, like using counterfeit components or inserting backdoors intentionally are one of the most significant issues in embedded devices security. To mitigate these threats, high-level security evaluation and certification more than EAL (Evaluation Assurance Level) 5 on CC (Common Criteria) are necessary on hardware components, especially on the cryptographic module such as AES. High-level security evaluation and certification require detecting covert channel such as backdoors on the cryptographic module. However, previous studies have a limitation that they cannot detect some kinds of backdoors which leak the in-formation recovering a secret key on the cryptographic module. In this paper, we present an expanded definition of backdoor on hardware AES module and show how to detect the backdoor which is never detected in Verilog HDL using model checker NuSMV.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.578-580
• /
• 2017

IoT technology poses a lot of security threats. Various algorithms are thus employed in ensuring security of transactions between IoT devices. Advanced Encryption Standard (AES) has gained huge popularity among many other symmetric key algorithms due to its robustness till date. This paper presents a hardware based implementation of the AES algorithm. We present a four-stage pipelined architecture of the encryption and key generation. This method allowed a total plain text size of 512 bits to be encrypted in 46 cycles. The proposed hardware design achieved a maximum frequency of 1.18GHz yielding a throughput of 13Gbps and 800MHz yielding a throughput of 8.9Gbps on the 65nm and 180nm processes respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1478-1482
• /
• 2003

In this paper. Rijndael cipher algorithm is implemented by a hardware. It was selected as the AES(Advanced Encryption Standard) by NIST. It has structure that round operation divided into 2 subrounds and subrounds are pipelined to calculate efficiently. It takes 5 clocks for one-round. The AES-128 cipher algorithm is implemented for hardware by ALTERA FPGA, and, analyzed the performance. The AES-128 cipher algorithm has approximately 424 Mbps encryption rate for 166Mhz max clock frequency. In case of decryption, it has 363 Mbps decryption rate fu 142Mhz max clock frequency. In case of cipher core, it has 320Mbps encryptionㆍdecryption rate for 125Mhz max clock frequency.