• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.260-265
• /
• 2002

In micro hole punching process, it is very difficult to align punch with die hole. Misalignment can cause a falling-on in hole quality and breakage of punch and die. Micro punching using soft die plate without a die hole has a big advantage because it is not necessary to align punch with die hole and to consider die clearance. Soft die plates are made by polymers or hard rubbers which are softer than metals. In this study, several micro punching experiments are conducted. Micro punching test with some materials shows that micro hole punching is feasible with some soft die plates. Through the section shape obtained by mounting and polishing, the punched hole quality is measured and the shapes of burr and dome we studied.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 제4회 하계분리막 Workshop (초순수 제조와 막분리 공정)
• /
• pp.177-189
• /
• 1996

Raverase osmosis or ultrafiltration systems have generally been regarded as hard to validate about WFI production. Though the Japanese and US Pharmacopoeias have allowed distillation and RO to be applied to WFI production process, only water stills, especially multiple effects have practically been employed for parenteral water production. On the other hand, the latest analysis has shown that even distillate contains such volatile organic matters as trihalomethanes and traces of heavy metals at a little higher concentration than supposed. The JP requires TOC to be monitored in WFI process based on RO or UF systems to control the concentration below 300ppb, but very few monographs or papers have so far been published about the concentrations of organic volatile matters in distillate. (See table 1-1) Therefore, this paper proposes a new applicable WFI systems based on the result of purified water analysis with some membranes used in the process. A well combined membrane system with other units could be expected to provide less amount of impurities in membrane-treated water than in distillate.

• 한국CDE학회논문집
• /
• 제6권3호
• /
• pp.206-214
• /
• 2001

This paper describes the wire EDM (Electric Discharge Machining) CAM system considering a variable taper wire-cut and an unmanned wire EDM during the night. Wire EDM is applicable to all materials that are fairly good electrical conductors, including metals, alloys and most carbide. Thus it provides a relatively simple method for making holes of any desired cross section in materials that are too hard or brittle to be machined by most other methods. In this paper we classify variable taper wire-cut machining patterns and variable taper wire-cut geometries. Also we determine unmanned wire EDM patterns fur the productivity of wire EDM industry. Developed system consists of two modules: 1) Variable taper wire EDM module guarantees the length ratio machining function, the parametric ratio machining function and the marking function. 2) Unmanned wire EDM module guarantees the automatic wire EDM during the night. The proposed system has been tested in the fields and found to be a useful system.

• 한국분말재료학회지
• /
• 제10권4호
• /
• pp.281-287
• /
• 2003

Ultrafine TiC-15%Co powders were synthesized by a thermochemical process, including spray drying, calcination, and carbothermal reaction. Ti-Co oxide powders were prepared by spray drying of aqueous solution of titanium chloride and $Ti(OH)_2$ slurry, both containing cobalt nitrate, fellowed by calcination. The oxide powders were mixed with carbon powder to reduce and carburize at 1100~125$0^{\circ}C$ under argon or hydrogen atmosphere. Ultrafine TiC particles were formed by carbothermal reaction at 1200~125$0^{\circ}C$, which is significantly lower than the formation temperature (~1$700^{\circ}C$) of TiC particles prepared by conventional method. The oxygen content of TiC-15%Co powder synthesized under hydrogen atmosphere was lower than that synthesized under argon, suggesting that hydrogen accelerates the reduction rate of Ti-Co oxides. The size of TiC-15%Co powder was evaluated by FE-SEM and TEM and Identified to be smaller than 300 nm.

• 한국분말재료학회지
• /
• 제8권1호
• /
• pp.61-69
• /
• 2001

Spark-Plasma Sintering(SPS) is one of the new sintering methods which takes advantages both inconventional pressure sintering and electric current sintering. It is known that SPS is very effective for the densification of hard-to-sinter materials like refractory metals, intermetallic compounds, glass and ceramics without grain growth. However, a clear explanation for sintering mechanism and an experimental evidence for the formation of weak plasma during SPS are not given yet. In this study, fundamental study on sintering behavior and mechanism of SPS was investiged. For this study, various spherical Fe powders were prepared such as as-received, as-reduced, and as-oxidized and then sintered by SPS facility. In order to confirm the surface cleaning effect during SPS neck region and fracture surface of sintered body was observed and analyzed by SEM/EPMA. Densification behavior was analyzed from the data of deflection along the pressure axis. Some specimens were additionally produced by Hot Pressing and the results were compared with those of SPS.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.418-419
• /
• 2006

In the present, the focus is on the synthesis of nanostructured TiC/Co composite powder by the spray thermal conversion process using titanium dioxide powder has an average particle size of 50 nm and cobalt nitrate as raw materials. The titanium-cobalt-oxygen based oxide powder prepared by the combination of the spray drying and desalting methods. The titanium-cobalt-oxygen based oxide powder carbothermally reduced by the solid carbon. The synthesized TiC-15wt.%Co composite powder at 1473K for 2 hours had an average particle size of 150 nm.

• 한국식품영양과학회지
• /
• 제29권5호
• /
• pp.758-761
• /
• 2000

This study was performed to investigate the contamination levels of harmful heavy metals that sampled from June. 1 to June. 31, 1999, at 3 areas in Jeonbuk west cost area. The heavy metal contents were determinated by ICPS (Inductively Coupled Plasma Spectrometer) method. The levels of total lead, cadmium, aluminum, zinc and copper were determined and the results were summarized as follows: The minimum and maximum values (ppm) of 3 areas of shellfishes (shortneck clam, hard clam, cockle clam, snail and top sell) were Pb: 1.29~4.35, Cd:0.12~0.37, Al: 9.45~54.06, Zn: 9.65~15.14, Cu: 0.62~1.64 ppm.

• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.78-87
• /
• 1995

Specular reflection appears with metals, plastics, glasses and many other solid objects which are required to be inspected, assembled, moved, or processed automatically. Recongnizing such shiny objects with specular reflections is a hard problem for computer vision, since specular reflections appear, disappear, or change their shapes abruptly, due to tiny movements of the view. Traditionally, such specular reflections are discarded as annoying noise for recongnition purposes. In this paper a technique is represented for obtaining shapes of specular objects. The ring illumin- ation system employes a ring source which is positioned on the axis of the camera. The concept of the proposed method is that if specular objects are illuminated by the ring they show their own dis- tinctive specularity features in surface from which we can infer the shape of the object. A series of experiments are performed to evaluate the performance of this system.

• 한국제4기학회지
• /
• 제22권1호
• /
• pp.1-12
• /
• 2008

과거 수 년 간에 걸친 해양환경변화와 중금속 농도에 의한 오염정도를 알아보기 위해 열대 및 아열대 해역에서 흔히 볼 수 있는 경골산호(Porites lutea)를 조사하였다. 연X선 사진 분석 결과 분석된 산호시료는 길이 71mm 에 뚜렷한 성장륜을 가지고 있어 과거 수 년에 걸친 해양환경 변화를 잘 지시하고 있다. 골격 중에 포함된 주요원소 및 미량원소 분석결과 각 원소의 최고값, 최저값 사이의 편차가 큰 것으로 나타났다. 원소들 간의 관계를 살펴본 결과 일부원소는 화학적 분배계수에 의해 aragonite 격자에 기계적으로 치환되어 축적된 것으로 판단되며 일부원소는 이차적인 환경요인에 의해 축적된 것으로 판단된다. Sr/Ca, Mg/Ca에 근거한 환경변화는 수년전에 큰 변화가 있었던 것으로 판단되며 Mg/Ca의 경우 특정기간에 큰 폭으로 증가하는 경향을 보인다. 일부 중금속의 농도는 크게 수 십배의 농도 변화를 보이고 있으며 특히 Cu, Zn의 경우는 성장하는 동안 Mg/Ca와 같은 거동을 보이는 것으로 나타났다. 이러한 요인은 아마도 지역적 오염과 해양환경변화와 관련이 있는 것으로 해석된다. 추후 전처리 과정 등을 포함한 추가적인 연구를 필요로 한다.

• 디지털융복합연구
• /
• 제10권10호
• /
• pp.431-437
• /
• 2012

대부분의 금속 공예가들은 자신의 개념 속에 있는 조형언어를 표현하기 위하여 필요한 재료를 찾고 기법을 연구함으로써 작품을 제작해 왔다. 그 중에서도 금속 공예는 재료의 제한 된 색상을 극복하려고 여러 가지 기법을 바탕으로 금속 표면에 변화를 주어 조형적 장식성을 표현했으며 미적 가치를 높이려 노력하고 있다. 이러한 시점에 과거의 전통 기법에 머물지 않고 새로운 방법을 연구해 나가는 작업이 가치 있는 일이므로, 본 연구는 이러한 요건에 맞추어 재료, 도구, 미적 표현의 가능성을 제시하고자 하였다. 이에 본 연구는 전통 금속 공예 기법 가운데 모꾸메가네(Mokumegane)기법을 활용하여 기존에 사용해 왔던 금속재료와 현대의 합금 금속재료를 적층융접하여 금속 표면 색상 표현을 연구하였다. 또한 작업 종류에 따른 문양표현 기법을 제시하여 기계에서 찾아볼 수 없는 금속표면의 무늬를 연구하여 전통 기법의 계승을 발전시킴과 동시에 고급공예시장에 대한 객관적 대비에 대하여 모색하고자 하였다.