2006년부터 2009년까지 축산물품질평가원에서 등급 판정된 도체성적이 있는 개체와 한국종축개량협회에 등록이 확인된 231,382 두의 자료를 이용하여 각 도체형질의 자료구조 분석 등을 살펴보고, 각 요인별로 도체형질에 어떠한 영향을 주는 지에 대한 환경효과 등을 분석하고, 변수선택법 등을 이용하여 향후 유전능력평가에서 사용 가능한 통계모형 찾아내고자 실시하였다. 한우 암, 수, 거세를 포함한 전체집단에서 출하체중, 도체율, 등 지방두께, 근내지방도에서 정규분포를 보이고 있었고, 다른 형질은 정규분포에 근접함을 확인할 수 있었다. 각 요인에 대한 분산분석에서는 한우 도체형질에 대하여 성별, 출생년도-계절, 도축년도-계절, 출생지역, 도축일령의 모두 고도의 유의성(p<0.01)이 인정되었다. 변수선택법을 이용한 모형적합도 검정에서는 출하체중, 도체중, 도체율, 배최장근단면적은 다섯 가지 환경효과를 선택하는 것이 최적이었고, 등지방두께와 근내지방도는 네 가지 환경효과를 고려하는 것이 최적이었지만, 다형질 분석으로 한 번에 분석을 하기 위해서는 다섯 가지 환경효과를 함께 고려하는 것이 적합하다고 사료된다.
본 연구는 저급한우갈비의 이용을 용이하게 하기 위해 건 양념에 키위, 배 등의 식물성 천연연화제를 첨가하여 저급양념한우갈비의 연도 개선 효과를 알아보고, 품질개선제를 첨가하여 품질개선 효과를 알아보고자 실시되었다.K0.1(키위분말 0.1%), K0.3(키위분말 0.3%), K0.5(키위분말 0.5%)를 첨가한 양념갈비의 MFI value는 각각 341.43$\pm$2.98, 368.31$\pm$10.95, 405.10 $\pm$5.82로 첨가량이 증가할수록 MFI value가 증가하였으며(P<0.001), P0.5(배분말 0.5%), P1.0(배분말 1.0%), P3.0(배분말 3.0%)를 첨가한 양념갈비에서도 첨가량이 증가할수록 MFI value가 증가하였다. 하지만, 배분말의 경우 갈비중량당 3.0% 정도 첨가시 확실한 연육효과가 기대되며, 배분말이 3.0%를 초과할시 더 큰 연육효과는 기대되지만, 갈비표면적보다 배분말의 부피가 역전되어 실효성이 없을 것으로 판단된다. 품질개선제로 CS(Polymix-CS)를 첨가한 경우 0.3% 수준 이상 첨가시 연육효과가 있었고, CS0.3과 CS0.5 처리구에서는 비슷한 MFI value를 나타내었다. 보수력(WHC)을 알아본 실험에서는 키위분말, 배분말 모두 첨가량이 증가할수록 보수력이 저하되었는데(P<0.001), 이러한 현상은 키위의 actinidin의 활성과, 배의 protease 성분으로 기인된 것으로 사료된다. 반면, 품질개선제를 첨가한 CS0.1, CS0.3, CS0.5 처리구에서는 첨가량이 증가할수록 보수력이 증가하였다. Drip loss의 경우는 보수력과 마찬가지로 키위분말과 배분말은 첨가량이 증가할수록 drip loss도 증가하였고, 반대로 품질개선제는 첨가량이 증가할수록 drip loss가 감소하는 경향을 보였다. Meat color는 양념과 혼합처리시 L*-value의 측정결과는 배분말 처리구에서 control과 유사한 값을 보였고, a*-value는 키위분말 0.1${\sim}$0.3%, 배분말 0.5${\sim}$1.0%, CS 0.3${\sim}$0.5 수준의 첨가시 control 보다 향상된 값을 보였다. 하지만, 양념갈비의 육색은 양념중 약 70%를 차지하는 설탕과 마늘 등으로 인한 심한 변색으로 첨가제의 첨가로 인한 육색의 안정 및 향상은 힘들 것으로 보인다. 관능검사의 경우 양념과 혼합처리시 Juiciness (P<0.01), Tenderness(P<0.001), Acceptability (P< 0.001) 항목에서 K0.3과 CS0.5 처리구가 전체적으로 높은 관능 수치를 나타내었으며, 배분말 중에서는 P3.0 처리구가 가장 높은 Accept- ability를 나타내었다. 또한 기타 항목에서는 갈비양념 성분으로 인해 유의차가 없었던 것으로 생각되며, 전체적으로 Acceptability는 Tender- ness, Juiciness와 밀접한 관계가 있음이 확인되었다. 본 실험에서 천연연화제로 사용한 키위분말과 배분말은 모두 식육연육효과를 가지고 있는 것으로 확인되었으며, 혼합인산염을 통한 품질개선효과도 확인하였다. 특히 키위는 적은 양으로도 연육효과가 있어, 앞으로 저급한우갈비에 효과적인 사용이 기대된다.
This study was conducted to evaluate the possible application of 2 D-SDS-PAGE (2 DE)-based proteome analysis techniques to the assessment of extreme proteolysis in postmortem skeletal muscle. Eight Hanwoo longissimus muscles were incubated immediately after slaughter for 24 h at 5$^{\circ}C$, 15$^{\circ}C$ or 36$^{\circ}C$. Warner Bratzler (WB)-shear force and ultrastructural configuration were determined at 24 h, and rate of proteolysis to 24 h was determined by 1 D-SDS-PAGE (1 DE) and 2 DE. In addition, tentative protein identification was performed from peptide mass fingerprints of MALDI-ToF analysis of major protein groups on 2 DE profiles. The result showed that although ultrastructural configuration was similar between the 5$^{\circ}C$ and 36$^{\circ}C$ treatments, meat at 5$^{\circ}C$ had higher WBshear force (approximately 5 kg greater). A higher rate of protein degradation at 36$^{\circ}C$ was observed based on Troponin-T degradation, 1 DE, and 2 DE analysis. This indicates that proteolysis during the early postmortem period was a significant determinant of shear force at 24 h. Little difference in proteolysis between 5$^{\circ}C$ and 15$^{\circ}C$ treatments was found based on classic 1 DE profile assessment. Meanwhile, considerable differences in the 2 DE profiles between the two treatments were revealed, with substantially higher rate of proteolysis at 15$^{\circ}C$ compared to 5$^{\circ}C$. Nuclease treatment improved 2 DE profile resolution. 400 ${\mu}$g and 600 ${\mu}$g of sample loading appeared to be appropriate for 24 cm pH 3-10 and pH 5-7 IPG strips, respectively. Protein detection and quantification of the 5$^{\circ}C$, 15$^{\circ}C$ and 36$^{\circ}C$ 2 DE profiles revealed 78, 163 and 232 protein spots respectively that were differentially modified in terms of their electrophoretic properties between approximately pI 5.3-7.7 with the molecular weight range of approximately 71-12 kDa. The current results demonstrated that 2 DE was a superior tool to 1 DE for characterising proteolysis in postmortem skeletal muscle.
The present study was designed to investigate the effects of calpain system on the formation of volatile flavor compounds in Hanwoo beef. In the first experiment (exp.1), Longissimus lumborum (LL) muscle samples were injected with solutions containing 50 mM $CaCl_2$ or 50 mM $ZnCl_2$ and 154 mM NaCl respectively, and aged for 7 d at $4^{\circ}C$. In the second experiment (exp.2), the ground LL muscle was incubated with the aforementioned solutions containing cathepsin inhibitor. The injection with $CaCl_2$ solution greatly elevated the calpain activity and concomitantly, significantly decreased the Warner-Bratzler shear force (p<0.05). The pH, meat color and cooking loss did not differ (p>0.05) between the treatment groups. A total of 51 volatile compounds were identified using the solid phase microextraction with gas chromatography (SPME-GC). Results on volatile analyses from the both experiments showed that the injection with calcium ions led to significant increase (p<0.05) concentrations of pyrazines and sulfuric compounds. These results coincide with a higher rate of protein degradation due to the $CaCl_2$ injection as compared to the control group. Significantly (p<0.05) higher levels of lipid oxidation derived-aldehydes were found in the samples with $ZnCl_2$. The exp.1 showed that cathepsin inhibitors had no effect on the formation of volatile flavor components after 7 d of aging. These results imply that the proteolytic activity of the calpain system is associated with generation of volatile compounds of chiller-aged beef, while the role of cathepsins is likely very limited.
The present study aimed to evaluate the effects of high-intensity ultrasound (HIU) application on meat quality traits, sensory parameters, and the microstructure of semitendinosus muscle from Hanwoo cattle. The samples were treated in an ultrasonic bath (35 kHz) at an intensity of 800 W/cm2 for 60 min, followed by aging at 1℃ for 0, 3, and 7 days. The application of ultrasound resulted in lower Warner-Bratzler shear force and higher myofibrillar fragmentation index values during the storage period. HIU also enhanced the tenderness, flavor, umami, and overall acceptability of cooked beef muscle. However, the electronic tongue evaluation results showed higher umami values in the control treatment on the seventh day of storage. The microstructure of sonicated meat showed disorganized myofibrillar architecture and swelling in the A-band region of sarcomeres during the storage period, which led to greater meat tenderness. The heatmap illustrated the high abundance of α-linolenic acid (C20:5n3) and eicosapentaenoic acid (C18:3n3) in sonicated meat samples on the third day of the storage. These results showed that HIU is a potential method for tenderizing and improving the sensory attributes of beef without compromising other quality aspects.
Utama, Dicky Tri;Jang, Aera;Kim, Gur Yoo;Kang, Sun-Moon;Lee, Sung Ki
한국축산식품학회지
/
제42권2호
/
pp.240-251
/
2022
Fat deposition in animal muscles differs according to the genetics and muscle anatomical locations. Moreover, different fat to lean muscle ratios (quality grade, QG) might contribute to aroma development in highly marbled beef. Scientific evidence is required to determine whether the abundance of aroma volatiles is positively correlated with the amount of fat in highly marbled beef. Therefore, this study aims to investigate the effect of QG on beef aroma profile using electronic nose data and a chemometric approach. An electronic nose with metal oxide semiconductors was used, and discrimination was performed using multivariate analysis, including principal component analysis and hierarchical clustering. The M. longissimus lumborum (striploin) of QG 1++, 1+, 1, and 2 of Hanwoo steers (n=6), finished under identical feeding systems on similar farms, were used. In contrast to the proportion of monounsaturated fatty acids (MUFAs), the abundance of volatile compounds and the proportion of polyunsaturated fatty acids (PUFAs) decreased as the QG increased. The aroma profile of striploin from carcasses of different QGs was well-discriminated. QG1++ was close to QG1+, while QG1 and QG2 were within a cluster. In conclusion, aroma development in beef is strongly influenced by fat deposition, particularly the fat-to-lean muscle ratio with regard to the proportion of PUFA. As MUFA slows down the oxidation and release of volatile compounds, leaner beef containing a higher proportion of PUFA produces more volatile compounds than beef with a higher amount of intramuscular fat.
Three hundred thirty five progeny testing steers of Korean beef cattle were evaluated ultrasonically for back fat thickness (BFT), longissimus muscle area (LMA) and intramuscular fat (IF) before slaughter. Class measurements associated with the Korean yield grade and quality grade were also obtained. Residual standard deviation between ultrasonic estimates and carcass measurements of BFT, LMA were 1.49 mm and $0.96cm^2$. The linear correlation coefficients (p<0.01) between ultrasonic estimates and carcass measurements of BFT, LMA and IF were 0.75, 0.57 and 0.67, respectively. Results for improving predictions of yield grade by four methods-the Korean yield grade index equation, fat depth alone, regression and decision tree methods were 75.4%, 79.6%, 64.3% and 81.4%, respectively. We conclude that the decision tree method can easily predict yield grade and is also useful for increasing prediction accuracy rate.
Interaction between carcass quality grade and end-point cooking temperature on eating quality of Hanwoo m. longissimus was investigated. Ten (10) of steers were sampled from a commercial population; carcasses with QG 1++ (n=5) and QG 1 (n=5) were chosen. Samples were cooked by electric oven at 60 or 82℃ and compared with uncooked control samples. The pH was not affected by cooking temperature but decreased the redness after cooking and steaks cooked at 60℃ were more reddish than steaks cooked at 82℃ in both QG groups. Higher cooking temperature greatly (p<0.05) increased the cooking loss, but there was no significant interaction between cooking temperature and QG on the cooking loss. Moisture is negatively correlated with temperature in both QG while the proportionate relationship between crude fat and end-point temperature found in QG 1++. WBSF values were significantly (p<0.05) high for QG 1, while that was significantly (p<0.05) increased when the temperature continues to increase. The increasing quality grade of beef resulted in significant higher (p<0.01) level of TBARS and cooking temperature increased TBARS content. Fatty acid composition was not altered by cooking at both temperatures and also the amount of fat intake was not changed. The current study indicates that eating quality of beef m. longissimus was greatly influenced by end-point temperature being interacted with QG. However, the amount and composition of fat were stable regardless of end-point temperatures. These results will provide a consumer reference to determine cooking conditions and intramuscular fat content.
This study aimed to estimate genetic correlation between carcass grading and retail productivity traits and to estimate the correlated response on retail productivity traits through selection for carcass grading traits in order to assess the efficacy of indirect selection. Genetic parameters were estimated with the data from 4240 Hanwoo steers using mixed models, and phenotypes included carcass weight (CWT), back fat thickness (BFT), eye muscle area (EMA), marbling (MAR), and estimated lean yield percentage (ELP) as the carcass grading traits, and weight and portion of retail cuts (RCW and RCP), trimmed fats (TFW and TFP) and trimmed bones (TBW and TBP) as the lean productivity traits. The CWT had positive genetic correlations with RCW (0.95) and TFW (0.73), but its genetic correlation with RCP was negligible (0.02). The BFT was negatively correlated with RCP (-0.63), but positively correlated with TFW and TFP (0.77 and 0.70). Genetic correlations of MAR with TFW and TFP were low. Among the carcass grading traits, only EMA was positively correlated with both RCW (0.60) and RCP (0.72). The EMA had a relatively strong negative genetic correlation with TFW (-0.64). The genetic correlation coefficients of ELP with RCP, TFW, and TFP were 0.76, -0.90, and -0.82, respectively. These correlation coefficients suggested that the ELP and EMA might be favorable traits in regulating lean productivity of carcass.
The aim of this study was to develop a marbling classification and prediction model using small parts of sirloin images based on a deep learning algorithm, namely, a convolutional neural network (CNN). Samples were purchased from a commercial slaughterhouse in Korea, images for each grade were acquired, and the total images (n = 500) were assigned according to their grade number: 1++, 1+, 1, and both 2 & 3. The image acquisition system consists of a DSLR camera with a polarization filter to remove diffusive reflectance and two light sources (55 W). To correct the distorted original images, a radial correction algorithm was implemented. Color images of sirloins of Hanwoo (mixed with feeder cattle, steer, and calf) were divided and sub-images with image sizes of 161 × 161 were made to train the marbling prediction model. In this study, the convolutional neural network (CNN) has four convolution layers and yields prediction results in accordance with marbling grades (1++, 1+, 1, and 2&3). Every single layer uses a rectified linear unit (ReLU) function as an activation function and max-pooling is used for extracting the edge between fat and muscle and reducing the variance of the data. Prediction accuracy was measured using an accuracy and kappa coefficient from a confusion matrix. We summed the prediction of sub-images and determined the total average prediction accuracy. Training accuracy was 100% and the test accuracy was 86%, indicating comparably good performance using the CNN. This study provides classification potential for predicting the marbling grade using color images and a convolutional neural network algorithm.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.