• Journal of Korean Academy of Nursing
• /
• v.22 no.3
• /
• pp.337-351
• /
• 1992

Nursing as it is practiced and taught, historically has been viewed as natural science. There are new movements to create a paradigm of nursing in the human sciences. A natural science methodologies elicit quantitative data from observable phenomena and reveal causal relationships. Human science methodology is the study of Unitary Man's participative experience in a situation, the simultaneity paradigm. In a theory of nursing rooted in human science assumptions about man and health are synthesized, and the practice of nursing is continuously expanded through research. To find independent nursing interventions especially cognitive nursing intervention models it has been necessary to consult a multitude of journals and text sources for references, and no one nursing textbook can be used in help patients achieve nursing goals. The goals of nursing in the simultaneity paradigm focus on the quality of life from the person's perspective. Cognitive interventions based on the person's perspective were selected from those that colleagues deemed appropriate to nursing and those that were identified in the nursing literature. They were supportive nursing care, reminiscence, meditation, relaxation and imagery. Nurses have been reluctant to make diagnoses, implement actions, and assume responsibility for this actions and this is of concern but can be understood because nurses have had little exposure to action and lack an intervention armamentarium from with which to choose actions to achieve nursing goals. Efforts in nursing education and nursing service are required to remedy this problem. Nurses must be convinced of the challenge and excitement associated with autonomous functioning. It is a characteristic of the true professional. Traditionally, nursing has prescribed one method for handling a situation. Fundamental nursing texts usually only present one way to handle a situation, because alternative interventions to achieve a client goal may be available. Considerably more research is necessary before these can be prescribed. However, unless a first step is taken, progress will not be made. The quality of health care or nursing care is enhanced when nurses transform dilemas into commited action. This is apparent from widespread experiences of nurses.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.3
• /
• pp.280-291
• /
• 2020

Objectives: Hazard classification is a controversial issue in the new MSDS system in which chemical companies have to prepare and submit MSDS for chemicals that they manufacture or import to the competent authorities according to the amended Occupational Safety and Health Act. The aim of this study is to suggest how to apply and manage harmonized hazard classification criteria and results by investigating current hazard classification systems and trends. Methods: The domestic issues about different hazard classification criteria and results were investigated by reviewing the literature and business outcomes regarding KOSHA. We also checked official and unofficial reports from the UN to understand international discussion about the topic. Chemical hazard classification results from agencies providing chemical information were analyzed to compare a harmonized rate between classifications. Furthermore, a field survey of a few chemical companies was conducted. Results: Under the related competent authorities, an integrated standard proposal was developed to harmonize the domestic hazard classification criteria. Although harmonized chemical information is strongly needed, we recognized the uncertainty and difficulty of harmonized hazard classification from the UN global list project review. In practice the harmonization rate of the classification was generally low between the classification in KOSHA, MoE, and EU CLP. Among hazard classes, health hazards largely led the disharmony. The field survey revealed a change of perception that the main body of chemical information production is manufacturers. Approaches and solutions about hazard classification issues differed depending on business size, types of chemical handling, and other factors. Conclusions: We proposed reasonable ways by time and step to apply hazard classification in the new MSDS system. Chemical manufacturers should make and offer chemical information including responsible hazard classifications. The government should primarily accept these classifications, evaluate them by priority, and support or supervise workplaces in order to communicate reliable chemical information.

• Journal of Fashion Business
• /
• v.6 no.5
• /
• pp.1-11
• /
• 2002

Today, great percentage of apparel fabrics comprise knit products. A few apparel items are almost exclusively made from knit products including sweaters, T-shirts, lingerie, and hosiery. In weft knits, intermeshing yarn traverses the fabric crosswise. The production rate of knitting machines is about four times higher than that of conventional looms iin proportion to the amount of fabric produced per unit time. Knit apparels fabrics are noted for freedom of body movement, easy-care, resilience, soft draping and quality. The appearance of fabrics is of prime importance along with tactile features such as smoothness, crispness, stiffness when we deal with the handling evaluation of the textiles. In practice, the quality and performance of fabrics judged by sighted evaluators, and it is perhaps logical, in attempting to establish an effective fabric objective measurement system. It is worthwhile to make objective measurement that correlate well with subjective evaluations made by sight and touch together. However, it often imposes difficulties to effectively measure and analyze the appearance or optical properties of the textile surface features. In this study, an attempt is made to provide a preliminary approach to the analysis of the gloss property, which is one of the optical properties of fabrics. The specimens range from 70/24 nylon 6 filament yarn knit fabric to 70/68 nylon 6 filament yarn knit fabric, the latter being finer. A few three-dimensional models based on Peirce's model of knit stitch have been proposed and material properties were given to calculate the properties. Goniophotometric measurements of the specimens were also carried out.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5714-5722
• /
• 2013

This study was done to investigate characteristics, knowledge, attitude, and performance on hand washing by nursing students who are prone to have clinical practice. Data were collected from 418 students in 3 nursing colleges from September to October, 2011 using questionnaire. The mean frequency and duration of hand washing were 7.2 times a day and 19.1 sec. The mean scores of knowledge, attitude, and performance on hand washing were 11.34(range 0~15), 3.42(range 1~5), 3.6(range 1~5), respectively. Above a half of students don't know about appropriate duration for hand washing and precautions after washing hands. Washing hands after rubbing nose, coughing, sneezing and handling the money and removing watch before hand washing were little performed. These results should be useful in development of education program for improving hand washing performance of nursing students.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.603-609
• /
• 2019

Objectives: This case report aims to contribute to the enhancement of training quality for occupational accident prevention by conducting surveys on customers' satisfaction with the training course management by the Occupational Safety and Health Training Institute (OSHTI) of KOSHA. Methods: Surveys were conducted through phone calls, customer service documents, and questionnaires from January 1, 2018 to December 31, 2018. Results: The surveys showed an answer rate of 97.36% and handling rate of 97.47% in 2018, an increase of 1.15% compared to 2017. The number of monthly inbound calls in 2018 was 5,902, rising 0.10% year-on-year, and the average inbound calls per day in 2018 was 289, a decline from 291 the year before. The number of provisions of customer service in 2018 was 68,952, increasing 1.89% year-on-year. The number of inquiries on the training curriculum was 58,744 in 2018, an increase of 3.98% compared to the 56,498 recorded in 2017. Inquiries on job training centers were the most common, numbering 27,114 (39.32%), followed by e-learning 18,470 (26.79%) and expert courses 13,160 (19.09%). Of the 149 answers to the customer service survey, 'Nothing to complain about' accounted for 86 (56.72%) and 'Diversifying training time and programs' numbered 22 (14.77%). Conclusions: Customer satisfaction in 2018 increased compared to that in 2017. However, there is a need to reflect the demands of customers for diversifying training time and programs, offer practice-centered training, and collect opinions on providing information in order to maintain high quality training course management.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.342-351
• /
• 2012

Purpose: Aerial spraying with an agricultural unmanned helicopter became a new paradigm in the agricultural practice. Laterally tilting behavior of a conventional agricultural helicopter, resulting in the biased down-wash and uneven spray deposit is a physically intrinsic phenomenon while hovering and cruise flights. Authors studied and developed a roll-balanced agricultural helicopter with a raised pylon tail rotor system. In this study, the attitude of the roll-balanced helicopter was determined using the Kalman filter algorithm, and the quality of roll balancing of a bare-airframe helicopter was evaluated. Methods: Instantaneous attitudes were estimated using the advantage of gyroscope, followed by the long term correction and prediction using accelerometer data for the advantage of convergence. The attitudes of the fuselage were calculated by applying the Kalman filter algorithm. The spraying maneuver of the helicopter was performed at a field of 50 m long, and the attitude data were acquired and evaluated. Results: The determination of attitude using the inertial measurement unit(IMU) and Kalman filter was reliable and practical. The intrinsic attitude of the developed helicopter was stable and roll-balanced. The deviation of roll angle was ${\pm}6.3^{\circ}$ with an average of $0^{\circ}$, referring to roll-balanced. Conclusions: Handling quality of the roll attitude determined to be steadily balanced. The balancing behavior of the developed helicopter would result in an even spray pattern during aerial application.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.1-10
• /
• 2013

The recent trend in the war fields on the globe may be characterized by the network-centric warfare, which would, in turn, make the concept of weapon systems be changed. To this end, the concept of system of systems (SoS) has been introduced in literature. An SoS is a collection of multiple systems, each of which is an independent system and can be interoperable with each other. Thus, in defense domain each SoS is a big weapon system as a whole operated in actual environment and each element of it is also an independent smaller weapon system, but they should be interoperable via network among each other. The safety results studied for each elementary system alone may not be fully applicable to the whole SoS. As such, the objective of this paper is to study how to make the SoS safety requirements be distributed down over the interoperable elementary systems. Since handling the interoperability requires a technique of systems architecture, a standard method called the DoD Architectural Framework (DoDAF) has been used here to derive a solution. Using DoDAF, the safety requirements were first analyzed in the operability environment. The results were then studied to be included in an integrated model of both the systems design and safety processes. A further study of present paper would facilitate ensuring safety in the development of SoS weapon systems in practice.

• Journal of Ginseng Research
• /
• v.28 no.3
• /
• pp.149-156
• /
• 2004

The objectives of this study were to investigate the morphology of mycorrhizal roots, and the effects of root age and soil texture on the mycorrhizal infection in ginseng (Panax ginseng C. A. Meyer) growing in Korea. Ginseng roots at ages of two to six years were collected from fields in late June. Their infection by arbuscular mycorrhizal fungi(AMF) was studied by clearing the roots and staining fungal hyphae with trypan blue. Root infection varied greatly depending on the developmental stages of young roots. Young tertiary roots, in diameter of smaller than 0.8 mrn, formed during the current growing season had root hairs and were frequently and in some cases heavily infected by AMF. Hyphal coils and arbuscules were abundant, while vesicles were rarely observed. Older secondary or tertiary roots in diameter of bigger than 1.0 mm with fully differentiated primary xylem formed during the previous growing season had no root hairs, and were not infected at all. The rates of mycorrhizal infection in the young tertiary roots were not affected by the age of the ginseng plants, suggesting that fungal populations might have not much changed during the aging of the cultivated fields up to six years. The differences in the infection rates among the different ages of ginseng were caused by differences in the amount of young tertiary roots in the samples. Soil texture, either sandy loam or clay loam, did not affect the rate of root infection. There were large variations in the infection rates among the different farms and locations within a farm. It strongly suggested that infection rates of the ginseng roots by AMF would be influenced by the practice of the farmers, possibly by avoiding consecutive planting, introduction of new topsoil, and the ways of handling the soil before transplanting the ginseng, such as fumigation or sterilization that might have affected indigenous inoculum sources of the AMF.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2555-2560
• /
• 1996

Inspecting the dimensional accuracy of a car-body in assembly line is a very important process to assure high productivity. Now there exist two common inspecting methods in practice. One is to measure a sampled car-body with three dimensional measuring machine, and the other is to measure car-body with three dimensional measuring machine, and the other is to measure car-body in assembly line using many sensors fixed to a large jig frame. The formal method takes too long to inspect a sampled car-body of a same sort, and cannot therefore give an useful error trend for the whole production. On the other hand, the latter lacks flexibility and is very cost-intensive. By using industrial robots and sensors, an in-line Car-Body Measuring(CBM) system which ensured high flexiblity and sufficient accuracy was developed. This CBM cell operates in real production line and measures the check points by the non-contact type using camera and laser displacement sensor(LDS). This system can handle about 15 Measuring points within a cycle time of 40 seconds. A process computer controls whole process such as data acquisition file handling and data analysis. Robot arms changes in length due to ambient temperature fluctuation affecting the measuring accuracy. To compensate this error, a robot arm calibration process was developed.

• Journal of Semiconductor Engineering
• /
• v.1 no.1
• /
• pp.1-12
• /
• 2020

Handling precise timing in high-speed transceivers has always been a primary design target to achieve better performance. Many different approaches have been tried, and one of those is utilizing the beneficial nature of injection locking. Though the phenomenon was not intended for building integrated circuits at first, its coupling effect between neighboring oscillators has been utilized deliberately. Consequently, the dynamics of the injection-locked oscillator (ILO) have been explored, starting from R. Adler. As many aspects of the ILO were revealed, further studies followed to utilize the technique in practice, suggesting alternatives to the conventional frequency syntheses, which tend to be complicated and expensive. In this review, the historical analysis techniques from R. Adler are studied for better comprehension with proper notation of the variables, resulting in numerical results. In addition, how the timing jitter or phase noise in the ILO is attenuated from noise sources is presented in contrast to the clock generators based on the phase-locked loop (PLL). Although the ILO is very promising with higher cost effectiveness and better noise immunity than other schemes, unless correctly controlled or tuned, the promises above might not be realized. In order to present the favorable conditions, several strategies have been explored in diverse applications like frequency multiplication, data recovery, frequency division, clock distribution, etc. This paper reviews those research results for clock multiplication and data recovery in detail with their advantages and disadvantages they are referring to. Through this review, the readers will hopefully grasp the overall insight of the ILO, as well as its practical issues, in order to incorporate it on silicon successfully.