• Asian-Australasian Journal of Animal Sciences
• /
• 제21권5호
• /
• pp.738-744
• /
• 2008

In most developing countries consumers purchase retail cuts from hot carcasses and prepare traditional meat products as per their convenience and requirements. In this study, effects of different post mortem handling practices on quality of meat curry from culled sheep meat have been studied. After slaughter, leg cuts were subjected to nine commonly prevalent handling conditions in India viz. deboning (boning out) and cooking within 2-3 h (1), deboning immediately and cooking after 5-6 h (2), deboning after 5-6 h and cooking (3), deboning immediately, storage at $4^{\circ}C$ for 24 h and cooking (4), chilling for 24 h at $4^{\circ}C$, deboning and cooking (5), deboning after 5-6 h, storage for 24 h at $4^{\circ}C$, and cooking (6), deboning after 5-6 h, storage for 48 h at 4??C and cooking (7), deboning after 5-6 h, freezing and cooking (8), deboning after 5-6 h, storage for 24 h at $4^{\circ}C$, freezing and cooking (9). Significant differences were observed in pH, water-holding capacity, cooking loss and shear force values. Sensory scores were significantly higher in conditions (1), (5) and (9), and significantly lower in conditions (4) and (6). From the results, it was concluded that, to have the best quality product, meat should be cooked either immediately after slaughter or should be deboned just before cooking. Storage of deboned meat at refrigerated temperature must be avoided.

• 산업경영시스템학회지
• /
• 제40권2호
• /
• pp.60-67
• /
• 2017

A baggage handling system (BHS) in airport is an unified system for moving the passengers' baggage in designated time. Input baggage from the check-in counter travels to the baggage claim area or cargo handling terminal through this system. In particular, entryway BHS consists of conveyors, X-ray and sorters such as tilt-tray to send the baggage to departing airplane and it could have various problems for handling certain amount of baggage in restricted time such as baggage jamming at certain merge point. This causes systemic error such as delay of the time, omissions of the baggage and even breakdown of the equipment and inefficiency. Also the increasing maximum time of the baggage passing through the BHS could delay the flight schedule and finally decrease the service level. Thus, the algorithm for controlling the flow of the merge is essential to the system. The window reservation algorithm is the one of the most frequently used methods to control the merge configuration. Above all, the reserve location, so called reserve ahead point, that allocates the window is important for the performance of the algorithm. We propose the modified window reservation algorithm and the best reserve locations by changing the reserve ahead point in the induction conveyors. The effect of various reserve ahead points such as the capacity and utility of the system were analyzed and the most effective reserve ahead point combination was found. The total baggage processing time and the utilization of the tilt-tray are properly considered when choosing the optimal Reserve ahead point combination. In the layout of this study, the configuration of four conveyors merged into one tilt-tray is studied and simulation analysis is done by AutoMod(R), 3D simulation software. Through the simulation, the window reservation algorithm is effectively operated with the best combination of reserve ahead point which reduces the maximum baggage travel time.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.317-323
• /
• 2006

본 연구는 초대형컨테이너선 기항에 대비한 차세대 항만하역기술로 고층 장치시스템 개발을 다루고 있다. 고층 장치시스템은 한정된 부지내에서 처리능력을 극대화시킬 수 있는 시스템으로 기존의 컨테이너 터미널이 안고 있는 장치장 부족문제룰 일시에 해결할 수 있으며, 고성능 및 자동화가 가능하여 터미널의 하역생산성을 높일 수 있는 대안으로 평가된다. 이에 본 연구에서는 고층 장치시스템을 적용한 터미널의 설계개념도를 작성해 보았으며 시뮬레이션 기법을 이용하여 고층 장치시스템을 도입한 전용터미널의 하역능력을 분석해 보았다. 연구결과는 차후 실제 터미널 운영을 위한 기본 설계 및 상세설계의 기초자료로 활용될 수 있으며, 본 연구에서 제시하는 고층 장치시스템은 향후 기존 터미널 및 신규 터미널 개발에 적용하여 항만의 부가가치를 더욱 향상시키는 원동력이 될 것으로 본다.

• 한국항만학회지
• /
• 제5권2호
• /
• pp.19-37
• /
• 1991

This work aims to : establish a model of the container physical distribution system of Pusan port comprising 4 sub-systems of a navigational system, on-dock cargo handling/transfer/storage system, off-dock CY system and an in-land transport system : examine the system regarding the cargo handling capability of the port and analyse the cost of the physical distribution system. The overall findings are as follows : Firstly in the navigational system, average tonnage of the ships visiting the Busan container terminal was 33,055 GRT in 1990. The distribution of the arrival intervals of the ships' arriving at BCTOC was exponential distribution of $Y=e^{-x/5.52}$ with 95% confidence, whereas that of the ships service time was Erlangian distribution(K=4) with 95% confidence, Ships' arrival and service pattern at the terminal, therefore, was Poisson Input Erlangian Service, and ships' average waiting times was 28.55 hours In this case 8berths were required for the arriving ships to wait less than one hour. Secondly an annual container through put that can be handled by the 9cranes at the terminal was found to be 683,000 TEU in case ships waiting time is one hour and 806,000 TEU in case ships waiting is 2 hours in-port transfer capability was 913,000 TEU when berth occupancy rate(9) was 0.5. This means that there was heavy congestion in the port when considering the fact that a total amount of 1,300,000 TEU was handled in the terminal in 1990. Thirdly when the cost of port congestion was not considered optimum cargo volume to be handled by a ship at a time was 235.7 VAN. When the ships' waiting time was set at 1 hour, optimum annual cargo handling capacity at the terminal was calculated to be 386,070 VAN(609,990 TEU), whereas when the ships' waiting time was set at 2 hours, it was calculated to be 467,738 VAN(739,027 TEU). Fourthly, when the cost of port congestion was considered optimum cargo volume to be handled by a ship at a time was 314.5 VAN. When the ships' waiting time was set at I hour optimum annual cargo handling capacity at the terminal was calculated to be 388.416(613.697 TEU), whereas when the ships' waiting time was set 2 hours, it was calculated to be 462,381 VAN(730,562 TEU).

• 동아시아식생활학회지
• /
• 제24권5호
• /
• pp.680-690
• /
• 2014

This study investigated the performance of hygiene management according to the capacity and food cost of foodservice in kindergartens as a measure of kindergartens foodservice hygiene management. Dietitians from the education office visited 50 kindergartens under the control of Dongbu District Office of Education during January, 2011. Kindergartens were 11 public and 39 private institutions. Over half of kindergartens (n=27) provided foodservice to 50~99 children. About 21 kindergartens had a foodservice cost per student per day of 2,000 won. Regarding personal hygiene, 'whether to wear an accessory or have a manicure' showed the best performance. 'Whether to have their health examined once every 6 months or keep their health records in 2 years' was rarely performed. For food materials, 'whether to buy food appropriate for the quality control standard of food materials' showed the highest performance. The highest performances for storage management of food materials and handling of food was 'whether to store goods within butlery at intervals more than 30 cm from the ground' and 'whether to heat and cook food more than $74^{\circ}C$', respectively. The highest performance for distribution of food and management of facilities was 'the hygienic management of cooking tools and facilities' and 'the proper installation of air-conditioning, heating and ventilation facilities', respectively. The results of this study show that capacity and food cost had the strongest effects on performance of personal hygiene. Especially, smaller facility size could increase performance of foodservice management.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.1930-1939
• /
• 2015

Wind power planning aims to locate and size wind farms optimally. Traditionally, wind power planners tend to choose the wind farms with the richest wind resources to maximize the energy benefit. However, the capacity benefit of wind power should also be considered in large-scale clustered wind farm planning because the correlation among the wind farms exerts an obvious influence on the capacity benefit brought about by the combined wind power. This paper proposes a planning model considering both the energy and the capacity benefit of the wind farms. The capacity benefit is evaluated by the wind power capacity credit. The Ordinal Optimization (OO) Theory, capable of handling problems with non-analytical forms, is applied to address the model. To verify the feasibility and advantages of the model, the proposed model is compared with a widely used genetic algorithm (GA) via a modified IEEE RTS-79 system and the real world case of Ningxia, China. The results show that the diversity of the wind farm enhances the capacity credit of wind power.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.271-272
• /
• 2011

The rising popularity of renewable energy sources resulted in development of the units of higher rated powers. As a result of the limited power handling capacity of individual devices, paralleling is the choice to increase the equipment rating, while keeping the THD of the current at the PCC within the agency specified standards. And their typical power circuit configuration limits the stress on individual devices to an appreciable extent. The main scope of this paper is the analysis of filter structure in paralleling inverter system's operation. Simulation results are shown to verify the theoretical analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.613-618
• /
• 1987

Rod consolidation is a method of increasing spent nuclear fuel storage capacity by disassembling fuel assemblies thus storing the fuel rods in a tighter array. It involves some basic operations which closely resemble to the material handling of a manufacturing process. But all the operations must be controlled remotely in shielded environment from outside due to the highly radioactive nature of the workpiece. In this study the status of the rod consolidation technology in other countries has been surveyed and a feasibility study for the conceptual design of this process have been made.

• 대한산업공학회지
• /
• 제19권1호
• /
• pp.19-29
• /
• 1993

The problem of clustering stock-keeping-units to assign storage locations is treated. Firstly, a construction heuristic algorithm is developed to cluster items considering demand dependencies(correlated assignment) for the case that the maximum number or the maximum volume(weight) of items per tray is constrained by the capacity of tray. Secondly, inventory-related cost as well as material handling cost is considered to determine the space requirement and the storage location of each item simultaneously.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.280-282
• /
• 1998

Communications, data storage or computation by manipulating the optical signals have the strong advantages over the traditional electronic circuits in regard to the data handling speed and capacity. Effective manipulation of the optical signals, however, requires materials of large nonlinear coefficients and of fast response time. Polymeric materials are one of the promising materials to meet the requirements for nonlinear optical (NLO) materials. (omitted)