• 제목/요약/키워드: Handling capacity

검색결과 272건 처리시간 0.029초

군간부 숙소에 적용된 중용량 및 멀티 보일러 시스템의 난방 및 급탕에너지 비교 (Heating and Hot Water Supply Energy Comparison of Medium Capacity and Multi Boilers System applied to Military Officer Housing)

  • 김민용;김영일;정광섭
    • 한국지열·수열에너지학회논문집
    • /
    • 제10권3호
    • /
    • pp.8-16
    • /
    • 2014
  • Heating and hot water supply energy consumption of medium and multi boiler systems applied to military officer housing are compared with in-situ experiment and TRNSYS dynamic simulation program. In a multiple boiler system, small capacity boilers are connected in parallel to meet the required capacity. For handling partial loads, medium capacity boiler relies on on-off control, while multi boiler adopts PI control. Since multi boiler has higher efficiency and better control strategy, the results show that energy consumption can be reduced significantly with the multi boiler system.

Proposing new models to predict pile set-up in cohesive soils

  • Sara Banaei Moghadam;Mohammadreza Khanmohammadi
    • Geomechanics and Engineering
    • /
    • 제33권3호
    • /
    • pp.231-242
    • /
    • 2023
  • This paper represents a comparative study in which Gene Expression Programming (GEP), Group Method of Data Handling (GMDH), and multiple linear regressions (MLR) were utilized to derive new equations for the prediction of time-dependent bearing capacity of pile foundations driven in cohesive soil, technically called pile set-up. This term means that many piles which are installed in cohesive soil experience a noticeable increase in bearing capacity after a specific time. Results of researches indicate that side resistance encounters more increase than toe resistance. The main reason leading to pile setup in saturated soil has been found to be the dissipation of excess pore water pressure generated in the process of pile installation, while in unsaturated conditions aging is the major justification. In this study, a comprehensive dataset containing information about 169 test piles was obtained from literature reviews used to develop the models. to prepare the data for further developments using intelligent algorithms, Data mining techniques were performed as a fundamental stage of the study. To verify the models, the data were randomly divided into training and testing datasets. The most striking difference between this study and the previous researches is that the dataset used in this study includes different piles driven in soil with varied geotechnical characterization; therefore, the proposed equations are more generalizable. According to the evaluation criteria, GEP was found to be the most effective method to predict set-up among the other approaches developed earlier for the pertinent research.

ORAC Assay 에 의한 인삼의 항산화 활성 연구 (Determination of the Antioxidant Capacity of Korean Ginseng Using an ORAC Assay)

  • 김성환;김영목
    • 동아시아식생활학회지
    • /
    • 제17권3호
    • /
    • pp.393-401
    • /
    • 2007
  • 인삼의 여러 생리 활성 가운데 항산화 정도를 알아보기 위하여 백삼(6 년근), 백삼(5 년근), 피부백삼(5 년근), 피부백삼 (4 년근) 의 80% 에탄올 엑기스, 에틸아세테이트 분획, 수포화 부탄올 분획, 물 분획을 얻은 후 LC/Mass 를 사용하여 사포닌 함량을 조사하고 기존의 여러 가지 항산화 작용 측정 방법들의 오류를 없애고 더욱 정확한 결과를 낼 수 있는 대처 방안으로 선정된 ORAC Assay에 의해 항산화 활성을 검토하였다. 인삼 중 사포닌은 ginsenoside Rg 1 과 Rb1 이 주요 성분으로 다량 함유하고 있었으며, Rc, Rb2, Re 등이 뒤를 이었고, 그밖에도 Rd, Rg3, Rh1가 널리 분포하고 있었다. 피부백삼 5 년근의 경우 에탄올 엑기스와 수포화 부탄올 분획에서 다른 인삼 분획에 비해 높은 함유량을 보였으나 실험의 한계상 인삼 재배기간과 인삼 종류별 각각의 분획에 대한 사포닌 함량 비교는 어려웠다. 인삼의 각 분획별 항산화 활성은 80% 에탄올 엑기스, 에틸아세테이트 분획, 수포화 부탄올 분획, 물 분획 모두에서 나타났고 비교적 전체 유기 용매 분획의 값이 비슷하였으며, 수층 분획이 다소 낮은 활성을 보였다. 검체 인삼들의 각 용매추출 분획 상호간의 유의성 비교에서는 모든 인삼 검체의 에틸아세테이트 분획에서만 유의성을 나타내었다(p>0.05). 인삼 중 항산화 활성은 에틸아세테이트 층으로 이행되는 폴리페놀 계통 성분이나 일부 비극성의 사포닌에 의한 것으로 추측되고 있으나 모든 분획에서 나타난 것으로 보아 이들 외에 산성 다당체, 당 단백질, 수용성 다당류 등 다른 생리활성 물질에 대한 연구가 요구된다.

  • PDF

참조집단의 변화를 통한 효율적인 항만의 순위측정방법:DEA 접근 (A Study on the New DEA Ranking Measurement for the Efficient Seaports based on Changing the Reference Set)

  • 박노경
    • 한국항해항만학회지
    • /
    • 제31권5호
    • /
    • pp.403-408
    • /
    • 2007
  • 본 논문에서는 Jahanshahloo et al (2007)가 새롭게 제시한 모형을 이용하여 2004년도, 국내 26개 항만들을 대상으로 2개의 투입변수(접안능력, 하역능력)와 3개의 산출변수(수출화물처리량, 수입화물처리량, 입출항척수) 가 있는 경우의 CCR[Charnes, Cooper, Rhodes(l978)] 효율성을 측정하였다. 또한 효율성이 1인 효율적인 항만들을 제거하는 방법과 나머지 항만들의 효율성을 평균하는 방법을 이용하여 효율적인 항만들의 정확한 순위를 측정하였다. 실증분석의 핵심적인 결과를 살펴보면, 가장 효율적인 항만의 순위는 옥포, 삼척, 울산, 대산, 부산, 고현항의 순위로 나타났다. 10개의 컨테이너항만을 제외한 16개 일반 항만들 중에서는 삼척항이 가장 강력한 효율적인 항만으로 나타났다. 정책적인 함의는 항만정책당국이 본 논문에서 사용한 분석방법과 더 장기적인 기간을 대상으로 효율성 분석을 시행하고 효율적으로 판명된 항만들에 대해서는 정확한 순위를 파악하고 그러한 결과를 차후 항만투자와 개발 시에 반드시 고려하고 반영해야만 한다는 점이다.

호흡기 감염 격리병원의 물류시스템 계획에 관한 연구 (A Study on the Architectural Planning of Material Handling System for the Airborne Infection Isolation Hospitals)

  • 최광석;권순정
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제23권2호
    • /
    • pp.63-72
    • /
    • 2017
  • Purpose: The purpose of this study is to review the material handling system of the Airborne Infection Isolation Hospitals which is the one of the key elements of infection control and to improve the basic data for the planning and design of those facilities. Methods: Research was conducted by literature reviews and case studies for the material handling system of domestic and foreign Isolation hospitals. Results: The result of this study can be summarized into three points. First, a general isolation unit and a high level isolated unit need to be distinguished in terms of efficiency and safety. In particular, it is desirable that a high level isolated unit have to completely separate clean and soiled circulations, and soiled corridor should be installed by those means. By doing this, the medical staff can observe patient rooms and supply clean materials directly in the clean zone without wearing PPE, so that safety and work efficiency can be improved at the same time. Second, for the safe disposal of wastes, it is desirable to install a dedicated sterilizer per ward and sterilize it at least in the ward. In addition, It is desirable to install a central waste treatment room and a dedicated soiled corridor in consideration of the inadequate handling capacity and emergency situation. Third, the characteristics of material flow chart in the negative pressured isolation hospitals and the corresponding material handling system have been presented. Implications: Infection control is very important in safety, but it is necessary to respond to the symptoms of the patient.

공항 수하물 처리 시스템 이벤트 로그의 프로세스 관점 분석 방안 연구 (A Process Perspective Event-log Analysis Method for Airport BHS (Baggage Handling System))

  • 박신념;송민석
    • 한국빅데이터학회지
    • /
    • 제5권1호
    • /
    • pp.181-188
    • /
    • 2020
  • 급증하는 항공 여객의 성장세에 맞춰 여객 터미널의 규모가 대형화됨에 따라 출발, 도착, 환승 여객들이 소지한 수하물을 최단 시간 내에 신속, 정확하게 처리할 수 있는 다양한 데이터 기술들이 접목된 첨단 수하물 처리시스템(Baggage Handling System; 이하 BHS)이 필수 요소가 되었다. 따라서 본 연구에서는 공항 수하물 처리시스템 운영의 고도화를 위해, 프로세스 관점의 데이터 분석 방법론을 통한 국내 공항의 수하물 처리능력 분석 방법을 소개하고, 이벤트 로그 기반 주요 지점의 정확한 부하예측 방법을 제시하여, 자원의 선제적 배치 및 flight-carrocel 스케줄링 최적화 문제 등 향후 첨단화된 BHS 운영 전략으로 이어질 수 있도록 한다. 분석에 사용된 데이터는 공공데이터 포털에서 얻을 수 있는 '전국 공항 수송실적', '항공기 운항 정보' API를 활용하였다. 국내 공항 BHS 시뮬레이션 모델에 해당 방법을 적용한 결과, 높은 수준의 예측성능을 확인 할 수 있었다.

초대형 컨테이너선박의 기항에 따른 컨테이너 터미널 장치장 규모 확대방안의 경제성 비교 (An Economical Efficiency Comparison for Extend Method of Container Terminal Yard Scale followed by the Call of the Mega Ship)

  • 송용석
    • 한국항해항만학회지
    • /
    • 제33권5호
    • /
    • pp.353-359
    • /
    • 2009
  • 국내 컨테이너 터미널의 대부분 컨테이너 처리량에 비해 장치장 규모가 협소한 편이다. 장치장이 협소한 이유는 터미널 개발 시 적용된 이론적인 안벽 처리능력이 실제 처리능력과 차이가 나기 때문이다. 또한 최근 선박이 대형화 되면서 터미널들이 안벽장비를 추가 투입함으로써 안벽 생산성을 당초보다 크게 향상시킨 현실에 기인하기도 한다. 본 연구에서는 터미널 운영 현실을 반영하여 하역 능력을 재산정하고 10,000TEU에 이르는 초대형 선박을 대상으로 하여 소요 장치장 규모를 산정 한 후 기존 터미널의 장치장 규모와 경제성을 비교하는 것을 주목적으로 한다.

전력IT를 위한 광대역 전력선통신에 관한 연구 (A Study on Broadband PLC for Power IT)

  • 김연수;신재문
    • 전기학회논문지
    • /
    • 제60권8호
    • /
    • pp.1599-1605
    • /
    • 2011
  • From now on, power line communication was made use of controling using 450 kHz narrow band, but as the PLC technology developing, in the near future get to the commercial step that is broadband PLC upto 30 MHz. In this paper, analyze the possibility of moving picture transmission for adapting surveillance camera which is among of the application of PLC. To analyze characteristics of channel, estimate the noise and impedance of lab, office, home. In case of noise, there is no problem to communicate each other because of 20 ~ 50 dB gain. In case of impedance, average impedance is about 100 ohm, it satisfy standards of designing modem but because max and min values get out of expectation there are some problem to acquire fully capacity of modems. Its condition is the same as transmission of multimedia data. In this test as more packets, as more handling rate, in lab, for the case that transmit 1,518 byte as the speed of 6 Mbps handling rate is upto 100%, it means possibility of moving picture transmission as the 6 Mbps speed. For delayed time there is no relationship about transmitted packets. As a result, there is no problem about applying surveillance camera via the PLC. And more cameras can work within PLC for considering the number of transmitted frames.

유한버퍼하에서 기계이용률과 산출량을 고려한 급송규칙 (A Dispatching Rule Considering Machine Utilization and Throughput under Finite Buffer Capacity)

  • 김종화;차상수
    • 산업공학
    • /
    • 제15권3호
    • /
    • pp.316-324
    • /
    • 2002
  • Automated Guided Vehicles are widely used as an essential material handling system for FMS to provide flexibility and efficiency. We suggest a new dispatching rule based on priority function which considers urgency and empty vehicle travel time under finite buffer capacity. We evaluate the performance of the proposed rule by comparing the performance of Shortest Travel Time/Distance(STT/D) rule in terms of machine utilization, throughput and WIP level using simulation. The simulation results show that the suggested dispatching rule is robust and provides better machine utilization, throughput with comparable WIP level compared to STT/D rule.

지오셀(GEOCELL)을 이용한 지반 안정 (SOIL STABILIZATION USING GEOCELL)

  • 이진웅;이종덕
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1993년도 가을 학술발표회 논문집
    • /
    • pp.33-42
    • /
    • 1993
  • Geocell is a three dimensional cellular confinement system that forms a reocomposite mattress with infill material to increase the bearing capacity dramatically rather than geotextiles of nonwoven and woven fabric type and geogrid. In terms of design, this geocell confinement is quite complex to assess and is different in its hieoretical evaluation and its concept from other geosynthetic products. Thsi study is aimed to help a basic understanding on Geoweb system, which is known to be the most effective and easiest in handling among the geocell systems ever developed, by introducing two method of interpretation for the improvement of bearing capacity. Thus the writers are sillingly to help the geotechnical engineers and the site engineers who might be encountered with the bearing capacity problems on site.

  • PDF