• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.261-269
• /
• 2021

Binary-phase complex spatial light modulators (BP-C-SLMs) are proposed and simulated. This study shows that bottom-top mirror-symmetrical uniaxial systems between two orthogonal polarizers allow one to construct BP-C-SLMs. BP-C-SLMs double the information-handling capacity per pixel, compared to the conventional amplitude-only spatial light modulators (A-SLMs), as well as being simply implemented with a single spatial light modulator (SLM), rather than a combination of an A-SLM and a binary-phase SLMs. Under limited conditions, BP-C-SLMs can control only the amplitude in single-phase space, and act as A-SLMs.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.23-26
• /
• 2022

In this paper, our ray tracing hardware is implemented on the latest high-capacity FPGA board. The system included ray tracing hardware for rendering and tree building hardware for handling dynamic scenes. The FPGA board used in the implementation is a Xilinx Alveo U250 accelerator card for data centers. This included 12 ray tracing hardware cores and 1 tree-building hardware core. As a result of testing in various scenes in Full HD resolution, the FPS performance of the proposed ray tracing system was measured from 8 to 28. The overall average is about 17.7 FPS.

• Mass Spectrometry Letters
• /
• v.15 no.1
• /
• pp.62-68
• /
• 2024

The Suspension Trapping (S-Trap) method has been a prominent sample preparation technique since its introduction in 2014. Its capacity to induce protein aggregation using organic solvents has significantly improved protein purification and facilitated peptide identification. However, its full potential for automation has been limited by the lack of a suitable liquid handling system until recently. In this study, we aimed to enhance the automation of S-Trap sample preparation by optimizing the S-Trap digestion process, incorporating triethylammonium bicarbonate (TEAB) and CaCl₂. The utilization of TEAB buffer conditions in this innovative process led to a noteworthy 12% improvement in protein identification. Additionally, through careful observation of various incubation conditions, we streamlined the entire sample preparation workflow into a concise 4 hours timeline, covering reduction, alkylation, and trypsin incubation stages. This refined and expedited automated S-Trap digestion process not only showcased exceptional time efficiency but also improved trypsin digestion, resulting in increased protein identification.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.2
• /
• pp.47-57
• /
• 2013

This study is to assess the reduction of non-point source pollution loads for rice straw mulching of upland crop cultivation at a watershed scale. For Byulmi-cheon watershed (1.21 $km^2$) located in the upstream of Gyeongan-cheon, the HSPF (Hydrological Simulation Program-Fortran) and SWAT (Soil and Water Assesment Tool), physically based distributed hydrological models were applied. Before evaluation, the model was calibrated and validated using 9 rainfall events. The Nash-Sutcliffe model efficiency (NSE) for streamflow using the HSPF was 0.62~0.76 and the determination coefficient ($R^2$) for water quality (sediment, total nitrogen T-N, and total phosphorus T-P) were 0.72, 0.62, and 0.63 respectively. The NSE for streamflow using the SWAT were 0.43~0.81 and the $R^2$ for water quality (sediment, T-N, and T-P) were 0.54, 0.87, and 0.64 respectively. From the field experiment of 16 rainfall events, the rice straw cover condition reduced surface runoff average 10.0 % compared to normal surface condition. By handling infiltration capacity (INFILT) in HSPF model, the value of 16.0 mm/hr was found to reduce about 10.0 % reduction of surface runoff. For this condition, the reduction effect of sediment, T-N, and T-P loads were 87.2, 28.5, and 85.1 % respectively. By handling soil hydraulic conductivity (SOL_K) in SWAT model, the value of 111.2 mm/hr was found to reduce about 10.0 point reduction of surface runoff. For this condition, the reduction effect of sediment, T-N, and T-P loads were 80.0, 83.2, and 78.7 % respectively. The rice straw surface covering was effective for removing surface runoff dependent loads such as sediment and T-P.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.5
• /
• pp.355-367
• /
• 2013

In the Policy and Charging Control(PCC) architecture of the 3GPP and WiMAX forum, the Policy and Charging Rule Function(PCRF) controls and configures the policies of quality of services(QoS) and accounting to a Policy and Charging Rule Enforcement Function(PCEF). In this paper, we categorize the errors into three types that include a disconnection with peer entity, a delayed or no response and a response with failure result, and propose a scheme to automatically synchronize the data between the PCRF and the PCEF for each type of error. Also, we conduct a quantitative analysis to see how much it can help to maintain the cell capacity of the mobile VoIP service in a WiBro network, which is implemented in Korea according to the standards of WiMAX. We can see that our proposed scheme improves the performances of PCC by preventing the waste of radio resources, the overload of systems, the memory leakage of servers, the system shutdown, and so on. We have validated the scheme by implementation, and reflected it in WiMAX standard documents.

• Journal of the Korean Institute of Navigation
• /
• v.8 no.2
• /
• pp.51-70
• /
• 1984

In the North Pacific Ocean a lot of large waves set up in winter, affected by continued winds and swells owing to severe extratropical cyclones. Under this sea condition, if the ship is about 100,000L/T (in deadweight capacity tonnage), we can't find the danger involved in the ship at sea apparently. But when we compare the seaworthiness of ship's building strength with the stress given to the hull by waves, we can't insist that the former be more stronger than the latter. As a result, VLCC is in danger of destroying and cutting for lack of longitudinal strength in heavy weather. Up to this time, Naval Architects have actively studied the relation between ship's longitudinal strength and waves as a ship's projector; however, actually, they have never made more profound study on the problem of longitudinal strength in relation to navigation. The main puprpose of this thesis is to clarify these vivid actual states of ship's trouble unknown to ship's masters. In this thesis we picked up VLCC Pan Yard, a vessel of Pan Ocean Bulk Carrier company's, as a model ship. And in the North Pacific Ocean, we have chosen for this research the basins where the wind speed and the wave height are greater than average. The data used this thesis are quotes from the "winds and waves of the North Pacific Ocean('64-'73)", and wind speed more than 30 knots was made use of as an ocject of this study. By usinh the ITTC wave spectrum, we found out the significant waves for every 5 knots within the range of 20 knots to 45 knots of wind speed. According to this H1/1000 was calculated. The stress of ship's hull is determined by ship's speed and wave height. We compared the ship's longitudinal strength with a planned wave height by rules of several famous classification societies in the world. In the last analysis, we found out that ship's present planned strength in heavy weather is not enough. Finally we made a graph for avoiding heavy weather, with which we studied safe ship's handling in the North pacafic Ocean in winter.

• Convergence Security Journal
• /
• v.22 no.2
• /
• pp.121-130
• /
• 2022

Recently, as soldiers are allowed to use mobile phones, cases are frequently transferred from the police to the military due to criminal acts, and digital evidence is collected separately from the reliability of previous investigations, such as overlapping seizure and search procedures. In this study, through in-depth interviews with practitioners in charge of digital evidence in the military, police, and courts, problems related to digital evidence handling, such as infringement of evidence ability due to overlapping human factors and procedures, are derived and analyzed. The presented procedure verified the effectiveness of the procedure through case analysis, and is expected to contribute to the guarantee of the evidence capacity of digital evidence and the efficiency of handling cases.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.4 no.4
• /
• pp.159-176
• /
• 2023

The conservation of the raccoon dog (Nyctereutes procyonoides) in South Korea requires the protection and preservation of natural habitats while additionally ensuring coexistence with human activities. Applying habitat map modeling techniques provides information regarding the distributional patterns of raccoon dogs and assists in the development of future conservation strategies. The purpose of this study is to generate potential habitat distribution maps for the raccoon dog in South Korea using geospatial technology-based models. These models include the frequency ratio (FR) as a bivariate statistical approach, the group method of data handling (GMDH) as a machine learning algorithm, and convolutional neural network (CNN) and long short-term memory (LSTM) as deep learning algorithms. Moreover, the imperialist competitive algorithm (ICA) is used to fine-tune the hyperparameters of the machine learning and deep learning models. Moreover, there are 14 habitat characteristics used for developing the models: elevation, slope, valley depth, topographic wetness index, terrain roughness index, slope height, surface area, slope length and steepness factor (LS factor), normalized difference vegetation index, normalized difference water index, distance to drainage, distance to roads, drainage density, and morphometric features. The accuracy of prediction is evaluated using the area under the receiver operating characteristic curve. The results indicate comparable performances of all models. However, the CNN demonstrates superior capacity for prediction, achieving accuracies of 76.3% and 75.7% for the training and validation processes, respectively. The maps of potential habitat distribution are generated for five different levels of potentiality: very low, low, moderate, high, and very high.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.781-786
• /
• 2010

In this study, a new concept of ocean transport system, called the mobile harbor serving for a short distance transport of containers with cargo handling cranes between mother containerships and coastal ports, is introduced. Instead of direct berthing a very large containership at the coastal port, Mobile Harbor is moving to the offshore mooring basin with enough water depth condition. Therefore, investigation of the coastal environment, technical condition and limitation of the domestic trade ports for the application of Mobile Harbor, is essential process. To figure out the accessibility of mobile harbor, the environmental conditions, the cargo handling capacity and marine traffic volume and flow pattern has been analyzed with the tools for marine traffic simulation and virtual navigation aids system. The most proper Mobile Harbor mooring areas among trade ports of the south and east coast are selected by analyzing the obtained information and evaluating its application: (1) Under natural environmental conditions such as air and sea weather, three candidate areas are selected such as Masan port, Ulsan port, and Busan(New port) port. (2) Under marine traffic and appropriateness of water facilities, three candidate areas are selected as Mokpo port, Busan(New port) port, and Donghae & Mookho port (3) For a region-based analysis considering handling capacity and the local managed trade ports in vicinity, three candidate areas are selected as Busan region, Yosu & KwangYang region, and Mokpo region. Through this study, the basic guideline for selection of optimum trade port and offshore mooring basin for mothership and Mobile Harbor is recommended. In order to apply the Mobile Harbor to the real water, navigaton aids as the virtual route identification with AIS must be introduced for maritime safety in the vicinity of Mobile Harbor area which berthing and cargo handling is being conducted.

• Journal of Korea Port Economic Association
• /
• v.24 no.2
• /
• pp.209-239
• /
• 2008

The purpose of this paper is to investigate the effectiveness of Korean port investment by using the newly developed slack-based multi-year panel congestion model of DEA(Data Envelopment Analysis). Inputs[port investment amount, cargo handling capacity, and berthing capacity], and outputs[cargo handling amount, number of ship calls, revenue, and score of customer service satisfaction] are used during 1994-2004 for 20 Korean seaports. Empirical analysis identified congestion especially in port investment as input at the ports of Gunsan, and Busan in the all 3 models, and the ports of Pyungtag, Mogpo, Yeosu, and leju in over 2 models. Port investment induced the rapid increase of port efficiency from the ports of Masan, Incheon, Donghae, and Samcheok. Therefore other ports except these ports should examine the reason about the inefficiency of port investment by searching out the situation of each ports directly. The main policy implication based on the findings of this study is that The Ministry of Land, Transport and Maritime Affairs in Korea should introduce the new measurement way after reviewing the multi-year slack-based congestion approach when the amount of port investment for each port is decided.