• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.70-80
• /
• 2022

An aerial refueling provides for extension of operational time and range for aircraft and enhances mission effectiveness, hence it application by most military aircrafts. The receiver aircraft should have the aerial refueling clearance that is established by performing technical and operational compatibility assessments to certify it for aerial refueling with a specific tanker model. The compatibility assessment includes aerial refueling handling qualities, functional, fuel, lighting system testing and it is finally verified through flight testing. However, since aerial refueling compatibility assessments have never been performed in Korea, there is no experience to determine the test requirements and the scope and size of the test program for a new development aircraft. This paper therefore introduces the common techniques of aerial refueling and aerial refueling flight test methods to understand the aerial refueling FCS (Flight Control System), OFP (operational flight program) and system validation, and aerial refueling envelope clearance of a fixed wing aircraft for a boom and receptacle refueling system that is being introduced into Korea Air Force.

• Journal of Nutrition and Health
• /
• v.34 no.4
• /
• pp.458-471
• /
• 2001

To evaluate the infra structure supporting hospital nutrition services, we conducted a survey on the unit of organization, unit of dietitians work system, number of personnel engaged on nutrition services, productivity of food service, management of dietitians works, computerization of nutrition services etc. Total ninety-six hospitals were participated in the survey, and they were varied in terms of hospital classification, location, number of beds and type of food service management. All of the large hospitals with more than 400 beds conducted nutrition services under the department of nutrition, but some of the middle and small hospitals with less than 400 beds conducted nutrition services under the other department such as administration. In most of the tertiary hospitals, the work of dietitians were separated in which food services and medical nutrition services were conducted independently by different dietitians, whereas, in most of general hospitals and all the hospital, food services and medical nutrition services were conducted by the same dietitians in all time. The numbers of dietitians and cooks per 100 beds were fewer in the large hospitals with more than 400 beds than the hospitals with less than 400 beds, and the number of cooking and meal serving assistants were the just opposit. The average productivity of food service was 44.5 meals per hour for each dietitian, 84.8 meals per hour for a cook and 7.0 meals per hour for a cooking and meal serving assistant. The productivities for dietitians and cooks tend to be higher in large hospitals than middle and small hospitals, whereas the productivities for cooking and meal serving assistants were just opposite. The large hospitals seemed to solve the problem on the lack of working personnels by hiring part-time workers and by utilization of computer system for their works. The pattern of daily work management in food service area was not much different between dietitians duties, but the pattern of daily work management in medical nutrition service area was different in a way which the analysis of patients nutrient intakes was almost not conducted by dietitians handling both food services and medical nutrition services. Therefore, this study demonstrates that there are significant differences in the infra structures conducting nutrition services among hospitals, suggesting that the strategies to improve this improve this structure in relation to the improvement of service qualities need to be investigated in the future. (Korean J Nutrition 34(4) : 458∼471, 2001)

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.598-604
• /
• 2007

The current study was conducted to evaluate carcass characteristics, objectives and sensory meat qualities of Hanwoo longissimus muscle as affected by ultimate pH. Twenty-four steers and bulls ($556{\pm}53$ kg and $0.63{\pm}0.32$cm for live weight and backfat thickness, respectively) were used. As there was a linear relationship (r = 0.77) between lean meat color and ultimate pH, cattles were thus segregated into normal $pH{\leq}5.8$, Normal, n = 13) and DFD (pH>5.8, n = 11) groups. Normal pH group had significantly (p<0.05) higher carcass weight, marbling score and backfat thickness than those for high pH group, while fat color and lean meat color were inverse. In principle component analysis for co-ordinates of DFD and normal meats, fat color, lean meat color, texture, time to pH 6.2 and pH at 24 h postmortem were associated with the positive range of the first factor (67.5%) while backfat thickness marbling score and temperature at 24 h were placed in negative values. The rate constant of decline in pH (pH k) did not differ between the two groups, implying that initial pH (i.e., pH at slaughtering) differed between two groups. Contour mapping of pH k between pH at 1 and 24 h postmortem indicated that high pH k was related to lower pHs at 1 and 24 h postmortem. This suggested that the high pH cattles (i.e., DFD cattle) resulted from their own potential. Although the time to reach pH 6.2 was significantly (p<0.05) shorter for normal meat (i.e., 3.2 h) than that for DFD one (i.e., 19.8 h), there were no significantly differences in both WB-shear force and sensory attributes. Given that the experimental animals were sampled from a similar group, which implies a similar myoglobin pigment content, the current data suggested that pre- and post-slaughter animal handling likely had a significant effect on ultimate pH and consequently meat color of Hanwoo longissimus muscle, and also small animals with lower marbling score and backfat thickness had a higher risk for DFD meat.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.91-99
• /
• 2005

Flight compatibility certification is performed to substantiate the compatibility between ALQ-X ECM pod and KF-16D/RF-4C aircraft. A certification plan for the ALQ-X flight compatibility is established. Similarity analysis, mass/inertia analysis, structural analysis/test, and ground vibration test/flutter analysis are made to support the safety of MIL-HDBK-1763 Test 250 (Captive compatibility flight profile). Aircraft flew along flight envelope boundary with representative ALQ-X configurations. Handling qualities are evaluated by comparing flight characteristics of the aircraft with and without ALQ-X. Structural integrity and endurance is evaluated using measured flight test data. Results of these flight tests showed that ALQ-X is compatible with KF-16D/RF-4C without altering the flight envelope which has originally been certified for ALQ-88 and ALQ-119 ECM pods. ALQ-X certification program made following technical achievements: Type III certification for foreign designed fighter, flutter analysis program development using GVT results, and utilization of MIL-STD-1553B data bus in flight test.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.17-27
• /
• 2022

A certain level of stability margin airworthiness criteria should be met to secure robustness against uncertainties between the real plant and the model in a flight control system design. The U.S. Department of Defense (DoD) specification of MIL-F-9490D and airworthiness certification standard of MIL-HDBK-516B uses gain and phase margin criteria of flight control system. However, the same stability margin criteria is applied at all development phases without considering the design maturity of each development phase of the aircraft. Ultimately, a problem arises when the aircraft operation envelope is excessively restricted. This paper proposes the relation of handling qualities and stability margin, and presents re-established stability margin criteria as a development phases and verification methods. The results of the research study are considered to contribute to the verification of the stability margin criteria more flexibly and effectively by applying the method to not only the currently manned developing aircrafts but also the unmanned vehicle to be developed in the future.

• Journal of Nutrition and Health
• /
• v.50 no.2
• /
• pp.133-141
• /
• 2017

Purpose: The objective of this study was to examine the association of temperature-fluctuation with freshness quality in various foods. Methods: We investigated the effects of storage conditions on antioxidant activities of cherries and romaine lettuce during storage at $0.7{\pm}0.6^{\circ}C$, $1.2{\pm}1.4^{\circ}C$, and $1.6{\pm}2.8^{\circ}C$. Cherries and romaine lettuce were stored for a period of 9 days and 7 days, respectively. We also analyzed the effects of storage conditions on fresh quality of beef and salmon during storage at $-0.3{\pm}0.8^{\circ}C$, $-0.6{\pm}2.3^{\circ}C$, and $-1.5{\pm}4.4^{\circ}C$. Both of them were stored for a period of 14 days. Results: The amount of water loss was highest in beef, and the microbial count was also the highest at $-1.5{\pm}4.4^{\circ}C$. In the case of salmon, there was no difference in water loss according to storage, and TBA value was significantly increased at $-1.5{\pm}4.4^{\circ}C$. Moisture retention was the highest at $0.7{\pm}0.6^{\circ}C$ in both romaine lettuce and cherry samples. The contents of polyphenol and flavonoid were significantly higher in cherries, and content of polyphenols in romaine lettuce was significantly higher at $0.7{\pm}0.6^{\circ}C$ (p < 0.05). DPPH activity decreased in the order of $0.7{\pm}0.6^{\circ}C$ > $1.2{\pm}1.4^{\circ}C$ > $1.6{\pm}2.8^{\circ}C$ over 7 days. Conclusion: The results indicate that temperature-fluctuation may affect qualities of foods stored in a refrigerator.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.7
• /
• pp.1017-1024
• /
• 2011

Korean wheat semolina (FS: fine semolina) with similar characteristics to durum wheat semolina was substituted at rates of 0, 10, 20, 30, 40, and 50% in pasta dough and the physical and cooking characteristics were investigated for making optimal pasta. Water absorption of the dough increased with the 10, 20, and 30% substitution ratio of FS. Development times were high with >30% substituted FS. This result positively influenced an increase in production and the preparation of the fresh noodle pasta. Furthermore, soft textured fresh noodles could be made due to the decrease in stability and increased weakness of the >30% substituted FS. The amylograph gelatinization characteristics of Korean wheat semolina exhibited an increase of gelatinization temperature and decrease of maximum viscosity when compared with durum wheat. The handling property of the dough showed more than 4 points in all sample groups. Weight and volume decreased and turbidity and cooking loss increased according to the increasing amount of substituted FS. However, samples with ${\leq}$ 30% FS substitution ratio had similar volumes and cooking losses when compared to the control. The L- and a-values increased and the b-value of color decreased as more FS was added. In a texture analysis, the hardness of the cooking noodles showed a low value with the >30% substituted FS. Springiness, gumminess, and chewiness exhibited a high value. In the results of a sensory evaluation, overall acceptability was high score with more than 7 points for the 30% added FS. The preferences for pasta colors were divided into white, which is similar to the Korean traditional noodle, and yellow, which is similar to durum wheat. Flavor and taste were not affected by substituting with FS. Low hardness and high chewiness was the most preferred noodle. These results suggest that >30% substituted FS was suitable for increasing quality and organoleptic qualities of Korean wheat pasta.