• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.41-45
• /
• 2006

This paper deals with human spatial cognition using visual and auditory stimulation. More specially, this investigation is to observe the relationship between the head and the eye motor system for the localization of visual target direction in space and to try to describe what is the role of right-side versus left-side pinna. In the experiment of visual stimulation, nineteen red LEDs (Luminescent Diodes, Brightness: $210\;cd/^2$) arrayed in the horizontal plane of the surrounding panel are used. Here the LEDs are located 10 degrees apart from each other. Physiological parameters such as EOG (Electro-Oculography), head movement, and their synergic control are measured by BIOPAC system and 3SPACE FASTRAK. In the experiment of auditory stimulation, one side of the pinna function was distorted intentionally by inserting a short tube in the ear canal. The localization error caused by right and left side pinna distortion was investigated as well. Since a laser pointer showed much less error (0.5%) in localizing target position than FASTRAK (30%) that has been generally used, a laser pointer was used for the pointing task. It was found that harmonic components were not essential for auditory target localization. However, non-harmonic nearby frequency components was found to be more important in localizing the target direction of sound. We have found that the right pinna carries out one of the most important functions in localizing target direction and pure tone with only one frequency component is confusing to be localized. It was also found that the latency time is shorter in self moved tracking (SMT) than eye alone tracking (EAT) and eye hand tracking (EHT). These results can be used in further study on the characterization of human spatial cognition.

• Journal of the Korean Society of Costume
• /
• v.62 no.6
• /
• pp.112-126
• /
• 2012

The style of a dress allows important characterization of an era since they reflect contemporary politics, society, culture and arts. Within a same category, period costumes develop into styles that reflect specific consciousness. The research method and the scope of the study are as follows: the research adopts a historical study method and a comparative research from a microscopic point. The scope includes resistance costumes that proceed with sans-culotte that comprises of the resistance party during the 18th French Revolution (1783-1799), and also a Hippy style which was popularized during the 1960s and 1970s for its anti-war movement. We researched both similarities and differences of design factors reflecting resisting consciousness in costumes that affected costume characteristics related to their socio-cultural background. Sans-culotte and the Hippie style reflect a common denominator in anti-social resisting customs. First, they show common characteristics that combine fashion trends of resistant element and design features. Second, they have common features which are the characteristics of deviation. On the other hand, these two customs also present a discriminative denominator in anti-social resisting customs. In the case of sans-culotte, they tend to symbolize confrontation by dividing into two equal parts: the old and new mode. Sans-culotte confronts the conventional mode and promotes practical costume styles based on justice standpoints. First, hippies pursue an exposition of individual emotions that disclose internal meanings of love and desire. Second, they focus on subjective characteristics and chase after masteries and pleasures by expressing intensity. Third, it extends and develops folk costumes from many countries that reveal ethnic trends. Therefore, this research compares and contrasts different changes in the fashions of revolutionary periods, and aims to recognize the relationship between design and costume characteristics, thus contributing to the predictions of future changes in fashion.

• Women's Health Nursing
• /
• v.10 no.4
• /
• pp.301-310
• /
• 2004

Purpose: The purpose of this study was to develop an exercise program for postmastectomy patients. Method: This study was conducted from October, 2003 to June, 2004. The exercise program was developed based on literature review and needs assessment using focus group interviews. The subjects for the focus group interview consisted of 11 patients, 13 recovering patients, and 20 nurses from 3 hospitals. Development of the program was proceeded with analysusm design and development steps. Result: The results of the needs assessment using the focus group interview showed that the exercise program was imperative for postmastectomy patients. Based on the results, a home video tape containing 3 steps, was developed. Each step includes warming-up, stretching, the main exercise, and cool-down. Steps 2 and 3 include exercises with an elastic band, and an elastic ball. The program was modified after conducting a pre-test. A self-checklist including shoulder mobility, hand strength, arm volume and subjective comments on how they feel will be used before and after the exercise program. Conclusion: The exercise program will improve breast cancer patients' quality of life and their physical well-being. Further studies are recommended to test the effectiveness of the exercise program.

• Korean Journal of Human Ecology
• /
• v.15 no.3
• /
• pp.457-467
• /
• 2006

The following research compares two mostly-used apparel systems that are used in colleges of Korea, Gerber and PAD, by analyzing advantages and disadvantages of their Dart, Tuck and Pleats-related functions in pattern construction process. The results are the following: First, regarding transformation methods, Gerber system was able to use pivot method, while PAD system was able to use both pivot and slash method. As for movement, distribution, synthesis, folding, producing additional Dart function, the PAD system was not able to synthesize more than two Darts, and only showed differences for other functions. On the other hand, the diamond-shape Dart and diagonal Dart can be produced only in PAD system, while none of curvy shaped Dart can be produced in both systems. Second, as for pattern outer line connection capability, which is a Dart automatic transformation function, both systems showed unnatural shapes and need for correction. Third, when constructing according to the type of Tuck, we could distribute multiple Darts at a time with PAD system, while with Gerber system, distribution into multiple Darts at a time was impossible at all. Fourth, when constructing according to the contour of Pleats, Gerber system made it possible to make construction of multiple lines and box/inverted Pleats with just one order, but PAD system required repetitive tasks, which remains room for enhancement in regard to such inefficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1825-1830
• /
• 2015

In some cases, despite the pedestrian jaywalking pedestrian traffic lights to red, or even wait for the walk signal to stand down in the driveway. If this is the case may be liable to lead to a traffic accident. Thus, using an infrared sensor wateuna adopted the approach that the warning announcement when a pedestrian enters the driveway, curved pedestrian crossing the intersection in this case, it is difficult to install. In this paper, we propose a Fitness referral system utilizes a built-in sensor of the Android mobile devices. For this purpose, the sensor is a proximity sensor using an acceleration sensor. The proximity sensor has a number of disadvantages compared to the high precision battery power, the acceleration sensor accuracy, fast response time, on the other hand, the disadvantage is the lower. Close to reduce battery consumption of the sensor, BMI of the user sensor control mechanism and increase the accuracy of the acceleration sensor (Body Mass Index) obtained after the index was applied to the recommendation algorithm, which like the movement mechanism.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.15-21
• /
• 2019

The worm reducer is capable of quadrature power transmission when the shafts are disposed at right angles to each other. Since a large reduction ratio can be obtained of up to approximately 1/100 and a sliding movement is performed during operation compared with other gears, the noise and vibration are small, and there is the advantage that reverse rotation can be prevented. On the other hand, severe wear and damage are displayed on the gear and worm tooth surface, and many defects, such as intense heat generation of the reducer, occur. In the reducer case, the four-piece casing method was selected to solve the problems of heat generation, transmission efficiency, and assemblability. In this paper, we analyzed the problems of the worm and worm wheel (the core parts of a 5-Ton worm reducer) and casing through these methods and researched how to solve them.

• The Korean Journal of Financial Management
• /
• v.22 no.2
• /
• pp.107-133
• /
• 2005

The object of this study is to examine the informational effect of the rating change announcement on the capital market. For this study, daily stock prices from January 1993 to February 2001 and daily bond prices from July 2000 to February 2001, for the bond market are used. In the stock market, we could not observe any statistically significant stock price reaction to rate change announcements from July 2000 to February 2001. However, if rating agencies announce more than two degradation for the period of January 1993 to February 2001, statistically negative significant stock price reactions are observed. On the other hand, there is no statistically significant stock price reaction to any other rating change announcement. In the bond market, there is no statistically test on the bond price reaction, but the general directions of bond price movements are consistent with the effect we can expect from rating change announcements. Generally, when the rating agencies degraded more than two grades at once, a cumulative abnormal returns move negatively during the overall period. In this case, we can say that rating agencies' role is to confirm information or investor's expectations. However, for the other cases, we could not observe my significant movement before or on the event data.

• Journal of the Korean Geographical Society
• /
• v.43 no.5
• /
• pp.701-714
• /
• 2008

This study examines the prevailing synoptic-scale mechanisms favorable for long-lived summer Persistent Positive Temperature Anomalies (PPTAs) as well as winter PPTAs in the United States. Such long-lived PPTAs usually occur in the south-central region of the United States in summer, but in the southwestern part of the United States in winter. Composite analyses of surface and pressure level data demonstrate that the formation of both winter and summer PPTAs is closely related to the movement of subtropical high pressure systems in the Pacific Ocean and Atlantic Ocean, respectively. The occurrence of long-lived summer PPTAs usually coincides with an extremely stable atmospheric condition caused by persistent blocking by mid- to upper-tropospheric anticyclones. Significant surface forcing is also easily identified through relatively high Bowen ratios at the surface. Warm air advection is, however, weak and appears to be an insignificant element in the formation of long-lived summer PPTAs. On the other hand, synergistic warming effects associated with adiabatic heating under an anticyclonic blocking system as well as significant warm air advection characterize the favorable synoptic environments for long-lived winter PPTAs. However, the impact of surface forcing mechanisms on winter PPTAs is insignificant.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.211-221
• /
• 2018

Objectives: The purpose of this study was to identify work-related risk factors associated with upper extremity symptoms among construction workers using the fourth Korean Working Condition Survey(KWCS). Methods: Subjects were 2,724 construction workers selected from 50,007 respondents in the 2014 KWCS. The presence or absence of upper extremity symptoms and work-related risk factors, including individual, physical, and psychosocial factors, were used as variables. A multiple logistic regression analysis was performed in order to evaluate the relationship of the upper extremity symptoms with work-related risk factors. Results: Upper extremity symptoms were significantly associated with: employment type(OR: 1.57, 95% CI: 1.18~2.09); job satisfaction(OR: 2.06, 95% CI: 1.33~3.18); verbal abuse(OR: 2.06, 95% CI: 1.33~3.18); tiring or painful posture(OR: 2.33, 95% CI: 1.73~3.15); carrying or moving heavy loads(OR: 1.68, 95% CI: 1.23~2.24); repetitive hand or arm movement(OR: 1.42, 95% CI: 1.06~1.91) Conclusions: In order to prevent the upper extremity musculoskeletal disease in the construction industry, it is necessary to stabilize employment, enhance job satisfaction, and eliminate violence in the workplace and improve physical work environment.

• Journal of KIISE:Databases
• /
• v.31 no.2
• /
• pp.150-162
• /
• 2004

Moving objects have characteristics that they change continuously their positions over time. The movement of moving objects should be stored on trajectories for processing past queries. Moving objects databases need to provide spatio-temporal index for handling moving objects queries like combined queries. Combined queries consist of a range query selecting trajectories within a specific range and a trajectory query extracting to parts of the whole trajectory. Access methods showing good performance in range queries have a shortcoming that the cost of processing trajectory Queries is high. On the other hand, trajectory-based index schemes like the TB-tree are not suitable for range queries because of high overlaps between index nodes. This paper proposes new TR(Trajectory Riving)-tree which is revised for efficiently processing the combined queries. This index scheme has several features like the trajectory preservation, the increase of the capacity of leaf nodes, and the logical trajectory riving in order to reduce dead space and high overlap between bounding boxes of nodes. In our Performance study, the number of node access for combined queries in TR-tree is about 25% less than the STR-tree and the TB-tree.