• Safety and Health at Work
• /
• v.8 no.1
• /
• pp.11-18
• /
• 2017

The purpose of this review is to name and describe the important factors of musculoskeletal strain originating from pushing and pulling tasks such as cart handling that are commonly found in industrial contexts. A literature database search was performed using the research platform Web of Science. For a study to be included in this review differences in measured or calculated strain had to be investigated with regard to: (1) cart weight/ load; (2) handle position and design; (3) exerted forces; (4) handling task (push and pull); or (5) task experience. Thirteen studies met the inclusion criteria and proved to be of adequate methodological quality by the standards of the Alberta Heritage Foundation for Medical Research. External load or cart weight proved to be the most influential factor of strain. The ideal handle positions ranged from hip to shoulder height and were dependent on the strain factor that was focused on as well as the handling task. Furthermore, task experience and subsequently handling technique were also key to reducing strain. Workplace settings that regularly involve pushing and pulling should be checked for potential improvements with regards to lower weight of the loaded handling device, handle design, and good practice guidelines to further reduce musculoskeletal disease prevalence.

• PNF and Movement
• /
• v.18 no.3
• /
• pp.333-341
• /
• 2020

Purpose: The purpose of this study was to investigate the effect of open and closed kinetic chain exercises with a sling on neck flexor thickness during chin-in movement in office workers with forward head posture. Methods: Thirty-one selected subjects randomly performed chin-in movement in open kinetic chain and closed kinetic chain exercises using a sling. All subjects were measured for their neck flexor thickness using ultrasound measurement equipment during the performance of chin-in movement in open and closed kinetic chain exercised. A paired t-test was used to compare the thickness of the total neck flexor, superficial, and deep neck flexor, respectively, between open and closed kinetic chain exercises with chin-in movement. Results: The thickness of the superficial neck flexor diminished in size more greatly during the chin-in movement with the closed kinetic chain than the open kinetic chain, but this was not a statistically significant difference (p > 0.05). On the other hand, the thickness of the total neck flexor and deep neck flexor had more greatly increased during the chin-in movement with the closed kinetic chain than the open kinetic chain, and this was a statistically significant differences (p < 0.05). Conclusion: This study suggested that chin-in movement with a closed kinetic chain is more effective in activating the deep neck flexor than the open kinetic chain. Thus, we believe that the closed kinetic chain exercise using a sling is an effective intervention to correct the postural alignment of individuals with forward head posture.

• Physical Therapy Korea
• /
• v.16 no.4
• /
• pp.8-15
• /
• 2009

Grip strength is an objective indicator for evaluating the functional movement of upper extremities. Therapists have been using it for a long time as an excellent barometer for evaluating the therapy process, therapeutic effects and prognosis of patients with injuries in upper extremities. This study investigated the effects of extensor pattern position and elastic taping of non-dominant hand on the grip strength of dominant hand among general adults. The subjects of this study were 23 males and 7 females from physical therapy departments of 3 Universities located in Busan who agreed to participate in the experiment and the resultant data were analyzed using SPSS version 12.0. The results of the study were as follows. First, there was a significant difference between the grip strength of dominant hand when the non-dominant hand was at the neutral position and that when the non-dominant hand was at the extensor pattern position and both hands were at the maximum strength simultaneously (Bonferroni-corrected p<.001). Second, there was a significant difference between the grip strength of dominant hand when the non-dominant hand was at the neutral position and that when the elastic taping of non-dominant hand was applied (Bonferroni-corrected p<.001). Third, there was no significant difference between the grip strength of dominant hand when the non-dominant hand was at the extensor pattern position and both hands were at the maximum strength simultaneously and that when the elastic taping of non-dominant hand was applied. The irradiation effects through the extensor pattern position of non-dominant hand and application of the elastic taping to non-dominant hand showed significant results in improving the maximum grip strength of dominant hand. This finding could be suggested as the probability for the indirect treatment of the upper extremities of hemiplegia and orthopedic patients due to the long-term fixing of upper extremities.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.1
• /
• pp.49-63
• /
• 2023

The purpose of this study is to investigate the current status and motives of buying second-hand clothing among university students and to suggest a plan to activate second-hand clothing transactions. In order to discover the effect of the buying motives on the purchasing of second-hand clothing, 112 university students who have purchased second-hand clothing over the past six months were surveyed and their responses were used for analysis. As a result of the analysis, it was found that design differentiation, habitual use, and economical factors had a meaningful effect on the purchase of second-hand clothes. Second-hand clothes have a positive environmental perception, but that perception did not impact the purchasing of second-hand clothes. It is necessary to raise the awareness and social movement around second-hand clothing and teach consumers the environmental benefits and sustainability of second-hand clothing. An activation plan for the second-hand clothing market is: 1. Proposes various market subdivisions that meet the characteristics and tastes of consumers that lead to the purchase of used clothing. In this study, two economic factors were found among the buying motives. The first is purchasing second-hand clothing at a very low price, and the second is finding luxurious expensive items or unique values at a lower price. Therefore, it is necessary to find various markets segments that suit consumer tastes by checking consumer characteristics and detailed factors. 2. Nurture second-hand clothing processing brands for the diversification of the second-hand clothing market. 3. There is an urgent need for quality classification, quality assurance, and the standardization of second-hand clothing. This study is meaningful in that it explored the possibility of having a positive effect on activating the second-hand clothing market.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.111-111
• /
• 2001

목적： To evaluate the feasibility of the event-related functional MR study using power grip studying the hand motor system 대상 및 방법： Event-related functional MRI was performed on a 1.5T MR unit in seven norm volunteers (man=7, right-handedness=2, left-handedness=5, mean age： 25 years). A single-shot GRE-EPI sequence (TR/TE/flip angle： 1000ms/40ms/90, FOV = 240 mm matrix= 64$\times$64, slice thickness/gap = 5mm/0mm, 7 true axial slices) was used for functiona MR images. A flow-sensitive conventional gradient echo sequence (TR/TE/flip angl 50ms/4ms/60) was used for high-resolution anatomical images. To minimize the gross hea motion, neck-holders (MJ-200, USA) were used. A series of MR images were obtained in axial planes covering motor areas. To exclude motion-corrupted images, all MR images wer surveyed in a movie procedure and evaluated using the estimation of center of mass of ima signal intensities. Power grip task consisted of the powerful grip of all right fingers and hand movement ta used very fast right finger tapping at a speed of 3 per 1 second. All tasks were visual-guid by LCD projector (SHARP, Japan). Two tasks consisted of 134 phases including 7 activatio and 8 rest periods. Active stimulations were performed during 2 seconds and rest period were 15 seconds and total scan time per one task was 2 min 14 sec. Statistical maps we obtained using cross-correlation method. Reference vector was time-shifted by 4 seconds an Gaussian convolution with a FWHM of 4 seconds was applied to it. The threshold in p val for the activation sites was set to be 0.001. All mapping procedures were peformed usin homemade program an IDL (Research Systems Inc., USA) platform. We evaluated the activation patterns of the motor system of power grip compared to hand movement in t event-related functional MRI.

• Smart Media Journal
• /
• v.2 no.1
• /
• pp.27-30
• /
• 2013

In this paper, we research the hand tracking and calibration algorithm using the EPIC sensor. We analyze the characteristics of EPIC sensor to be more sensitive in the around E-filed, and then we implement the 2-dimensional axis-transformation using the difference of detected amplitude between EPIC sensors. In addition, we implement the calibration algorithm considering the characteristics of EPIC sensor, and then we apply the Kalman filter to efficiently track a target. Thus, we implement the environment of window applications for verification and analysis the implemented algorithm. In turn, we use the DAQ API to extract the analog data. The DAQ hardware has the function of measuring and generating an electrical signal. Moreover, we confirm the movement of mouse cursor by detecting the potential difference depending on the movement of the user's hands.

• Journal of Platform Technology
• /
• v.11 no.1
• /
• pp.38-51
• /
• 2023

We propose an intelligent interface algorithm using hand gesture recognition information based on artificial intelligence. This method is functionally an interface that recognizes various motions quickly and intelligently by using MediaPipe and artificial intelligence techniques such as KNN, LSTM, and CNN to track and recognize user hand gestures. To evaluate the performance of the proposed algorithm, it is applied to a self-made 2D top-view racing game and robot control. As a result of applying the algorithm, it was possible to control various movements of the virtual object in the game in detail and robustly. And the result of applying the algorithm to the robot control in the real world, it was possible to control movement, stop, left turn, and right turn. In addition, by controlling the main character of the game and the robot in the real world at the same time, the optimized motion was implemented as an intelligent interface for controlling the coexistence space of virtual and real world. The proposed algorithm enables sophisticated control according to natural and intuitive characteristics using the body and fine movement recognition of fingers, and has the advantage of being skilled in a short period of time, so it can be used as basic data for developing intelligent user interfaces.

• Applied Biological Chemistry
• /
• v.41 no.8
• /
• pp.583-586
• /
• 1998

Porous ceramic cups are used for monitoring ion concentration in soil solutions in various time course and depth. A soil solution sampler was constructed in laboratory by inserting pliable perfluoroalkoxy(PFA) tubings into porous cup through holes in PVC rod segment which plugged top opening of the porous cup. The system was installed in drip irrigated soil in a vertical position, and nitrogen movement below the drip basin was monitored. To collect soil solution, vacuum in the cup was applied with a hand vacuum pump. The samples obtained were sufficient enough to run quantitative analyses for a number of chemicals. Nitrogen transformation and movement could be well defined, and the system seemed to be relevant to the other soil solution samplers in monitoring chemical movement in soil. Although this system has general deficiencies found in the other samplers using ceramic cup, it could be easily constructed at a low cost. Since the tubing was pliable, the cups could be installed in horizontal position, and this allows installations of the cups at more precise depth increments and also more precise samplings of soil solution at each depth.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.5
• /
• pp.340-344
• /
• 2014

Compost and gypsum can be used to ameliorate soil physicochemical properties in reclaimed tidal lands as an organic and inorganic amendment, respectively. To evaluate effects of compost and gypsum on soil water movement and retention as a soil physical property, we measured the soil's saturated hydraulic conductivity and field capacity after treating the soil collected in a reclaimed tidal land with compost and gypsum. Saturated hydraulic conductivity of soil increased when compost was applied at the conventional application rate of $30Mg\;ha^{-1}$. However, the further application of compost insignificantly (P > 0.05) increased saturated hydraulic conductivity. On the other hand, additional gypsum application significantly increased soil saturated hydraulic conductivity while it decreased soil field capacity, implying the possible effect of gypsum on flocculating soil colloidal particles. The results in this study suggested that compost and gypsum can be used to improve hydrological properties of reclaimed tidal lands through increasing soil water retention and movement, respectively.

• Journal of the Korea Furniture Society
• /
• v.14 no.2
• /
• pp.53-61
• /
• 2003

Wharton Esherick (1887-1970) is the pioneer of the Studio Furniture movement which was emerging after the Second World War in the United States. As Esherick began to work on his studio at Paoli, Pennsylvania from 1926, he became enormously influential in the Stuido Furniture movement until his death in 1972. He was connecting the English Arts and Crafts ideal to the post-war craft revival. As the work of William Morris did, in the period of consumerism Esherick's furniture gave a chance to purchase unique furniture to people who wanted a different taste. Not only his furniture is unique and hand-crafted also has sculptural quality which made his followers to see furniture as a different possibilities. His work was influential to the people who followed him after the war such as Arthur Carpenter, Wendell Castle, and Sam Maloof. In the roots of the craft revival, it is hard to underestimate the contribution of Esherick's notion of sculptural furniture.